LITETRONICS WPC060 LED 2-In-1 Traditional or Full Cut Off Wall Pack Owner’s Manual

LITETRONICS WPC060 LED 2-In-1 Traditional or Full Cut-Off Wall Pack

DESCRIPTION

Litetronics LED 2-In-1 Traditional or Full Cut-Off Wall Packs are available from 30W to 100W. The units are offered with selectable wattage and CCT (3000K, 4000K and 5000K), photocell, and pluggable sensor socket. Optional Sensors include PIR (SC005), Microwave (SC006) and our LiteSmart Sensor (SC008) enabling the same energy-saving control but can be set up and managed on a group level via the LiteSmart mobile app to meet code and local ordinance compliance. The fixtures offer ease of installation with the swing-open unit to facilitate mounting and electrical connections and include an EVA cotton pad for wall mount installation.

FEATURES

• Photocell and pluggable sensor socket
• Compatibility with LiteSmart mobile app
• Field selectable wattages and CCT (3000K, 4000K, 5000K)
• 50,000-hour rated life
• 5-year warranty
• DLC 5.1 Premium

MARKETS

• Building facades
• Garage and dock doors
• Loading dock and entry doors
• Safety & security lighting
• Schools, campuses
• Commercial, Industrial
• Storage rental facilities
• Multi-family, apartment complex
• Columns & porte cochere

MOUNTING

EVA cotton pad for wall mounting

**CERTIFICATIONS

**

SPECIFICATIONS

• ife (L70): 50,000 hours
• Warranty: 5 years

PERFORMANCE

• Operating temp: -40F to 113°F (-40°C to 45°C)
• Efficacy (LPW): 135
• CRI: 80

ELECTRICAL

• Input voltage: 120-277V
• Input frequency: 50/60Hz
• PF: ≥.95
• THD: ≤ 20%
• Surge protection: 4KV
• Dimming: 0-10V
• Minimum dimming: N/A
• Aux. Voltage: N/A
• Driver Class – WPC060: N/A WPC100: Class P
• Whip/Cord: None
• Sensor: Plug-In (Choice of MW, PIR, Bluetooth)

MOUNTING
Standard: Standard Wall Mount.

OPTICAL

• Beam: 93°
• Lens: Polycarbonate Frosted
• UGR: N/A

PHYSICAL

• Finish: Matte Powder Coat
• Colour: Dark Bronze
• Housing: Painted Steel

EMERGENCY BATTERY OPTION: WPC060E

• Wattage: 8
• Voltage: 120-277V
• Battery Life: 90 Minutes
• System Life: 50,000 hrs.
• Testing: Push Button – For monthly and yearly self-testing.
• Indicator Light: Located On Housing
• UL/ETL: Pending
• Operating Temp: 40F to 113°F (-40°C to 45°C)
• Recharge Time: 24 Hours

INDUSTRY STANDARDS/RATINGS

• Bug Rating
• WPC060: B2-U3-G2
• WPC100: B3-U3-G3
• IP: 65
• IK: N/A
• Location: Wet
• Outdoor Rated: Yes
• IC: No
• UL/ETL: UL
• FCC: Yes
• RoHS: Yes
• DLC: 5.1 Premium

DIMENSIONS / WEIGHT

PRODUCT OVERVIEW AND INSTALLATION

WALL MOUNT INSTALLATION INSTRUCTIONS

1. Turn off the power.
2. Use a screwdriver to remove the screws on both sides. (Figure 1)
3. Open the fixture, pull out the connection terminals, and remove the upper cover of the fixture. (Figure 2)
4. If the optional sensor is to be installed, use a screwdriver to remove the sensor port plug. Otherwise, leave the sensor port plug in place. (Figure 3)
5. Drill through the mounting hole with an electric drill matching the mounting pattern of the electrical junction box.
6. If the optional sensor is to be installed, refer to the 1-pin sensor socket installation guide for instructions. (Figure 5) Attach the EV A cotton pad to the back shell. (Figure 6)
7. Pass the wire through the back hole. (Figure 7)
8. Install the back mounting plate onto the mounting seat with screws. (Figure 8) See installation instructions for special function adjustments.
9. Connect L, N and G wires to the power supply as per Figure 1 and Figure 2. (Figure 9)
10. . Install the cover of the fixture. (Figure 10) 11. Make sure the installation is complete and secure before turning on the power

ORDERING INFORMATION
Listed below are the selectable wattage settings and lumens for each model number.

ACCESSORIES

SENSORS & CONTROLS

WIRELESS CONTROL WITH PLUGGABLE SENSORS

The optional MW (SC006), and PIR Sensor (SC005) use a remote control for easy setup and control of individual fixtures.

The smart PIR sensor uses a remote control (SCR054) to Commission and group Litetronics “Next Generation” LiteSmart IR-Enabled SC008 Sensor.

LiteSmart is a mobile app that enables total management of lighting systems at the touch of your fingers. Within the app, all functionality can be set up and controlled; on/off, dimming, grouping, scene creation and time scheduling. Adjustments can also be made to the occupancy sensor settings and then implemented across an entire group in seconds.

• Total control over your lighting system
• Quick and easy changes that can be implemented in seconds across a group of fixtures
• Further energy reduction via occupancy sensing, and max wattage control
• Ability to create custom scenes based on specific needs, such as presentations
• Time scheduling that sets hours of operation per day

Set up and manage your space with LiteSmart.
Note: Elbow with 1 Pin Sensor Socket and sensors sold separately.

Litetronics, Inc. | 6969 W. 73rd St. Bedford Park, IL 60638 | Tel:1-800-860-3392 | customerservice@litetronics.com
www.Litetronics.com

References

• Commercial Lighting Company | LED Lighting Solutions
• Commercial Lighting Company | LED Lighting Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>