Nixon NRM01A104-2A Offroad Front Bumper User Manual
- June 17, 2024
- Nixon
Table of Contents
FRONT BUMPER
SIDE WINGS
User Manual
NRM01A104-2A Offroad Front Bumper
| Model: | NRM01A104-2A |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 34.6 x 21.3 x 11 inch |
| Package Dimensions: | 22.7 x 26.1 x 16 inch |
| Product Weight: | 43 lbs |
※ Thank you for purchasing the FRONT BUMPER Side Wings. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number and order number, and our support team will help you solve problems.
WARNING
※ This product is designed primarily to enhance the appearance of the vehicle.
Do not rely in any way on the components of this product to protect against
injury or death in the event of an accident. To reduce the risk of serious
injury or property damage, please read all safety messages and understand all
instructions and procedure notices before attempting to install or use this
product.
CAUTION
※ Properly torque and recheck fasteners and security of step tread after 250
miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
Parts Information
| NO. | Parts Name | Size | Line Graph | Qty | Color |
|---|---|---|---|---|---|
| I | Bumper | I | 1 | Black | |
| I | brackets | I | 2 | Black | |
| I | License Bracket | I | 1 | Black | |
| B15 | Half Head Allen Bolts | M8x20 | 3 | Dacro Black | |
| N14 | Hex Flange Nuts | M8 | 3 | Dacro Black | |
| W22 | Spring Washer | ¢10 | 13 | Dacro Black | |
| W23 | Flat Washer | Cl>1Ox25x2 | 25 | Dacro Black | |
| B35 | Hex Bolts | M10x35 | 13 | Dacro Black | |
| N15 | Hex Nuts | M10 | 13 | Dacro Black | |
| B46 | Half Head Allen Bolts | M6x40 | 5 | Dacro Black | |
| N11 | Hex Lock Nuts | M6 | 5 | Dacro Black |
※ Note:
Spare parts such as B22 、B07 、B09 、N09 、W37 、B46 、N11 are provided with 1PCS
each (included in the number of parts details).
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number
of components is complete.
Step 2: Splicing the Side Wings.
Step 3: Install the 4 Inch Ledlight.
Step 4: Install the H-Rubber Strip.
Step 4: Install the Side Wings.
Step 5: Install the Radar Probe.
Note: If the car does not have a radar probe, this step can be ignored.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>