NIXON Ripper Digital Watch Instruction Manual

: June 15, 2024
: Nixon

Table of Contents

WELCOME.
FEATURES
EUROPEAN UNION : DISPOSAL INFORMATION
WARRANTY INFO
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NIXON Ripper Digital Watch Instruction Manual

WELCOME.

You just bought a NIXON watch. How about that. Welcome to the NIXON side, a side that’s about custom-built product, quality, and durability. We’re stoked you selected one of our watches. e fact that you bought a NIXON means you can probably tell time, but you may not be familiar with all the doo-dads and features of our watches. So if you’re stuck, read through these instructions. Or get your friends to read them and then they can tell you what’s up.

FEATURES

Digital LCD module. Functions include time of day, day, alarm, stopwatch, bright backlight for after-hours. Coin cell CR1620 battery.
100 meter / 10 ATM water rating and a recycled ocean plastic case with 4 pusher navigation. A molded 20mm x 20mm straight silicone quick release band with a stainless steel screw down case back.

MODE 1 TIME / DATE
Press PUSHER B to select time mode. Press PUSHER D to toggle between TIME ALARM and TM
ALARM mode to set. 2. Press and hold PUSHER D for 2 seconds until the “SET” message appears and the second digits will blink.
Press PUSHER C to reset the second digits to 00.
Press PUSHER B to advance to minute setting. The minute digits will begin to blink.
Press PUSHER C to set the minute digits. Holding down the pusher will speed up the process.
Press PUSHER B to advance to hour setting. The hour digits will begin to blink. Holding down pusher will speed up the process. Press PUSHER C to set the hour digits.
Follow the same pattern to set date, month, day (of the week), hour format and calendar format.
NOTE: To set the hour fromat , press PUSHER C button to toggle between 12-hour and 24-hour format.
NOTE: The chosen hour and calendar formats will apply to both TIME ALARM mode and TM-2 ALARM mode.
NOTE: In TM-2 settings, only minutes, hours, date, month and day are open to setting.
MODE 2 ALARM
Press PUSHER B to select alarm mode. Press PUSHER D to toggle between ALM1 and ALM2 mode to set.
Press and hold PUSHER D for 2 seconds until the “SET” message appears and the minute digits will blink.
Press PUSHER C to set the minute digits. Holding down the pusher will speed up the process.
Press PUSHER B , the hour digits will blink. Press PUSHER C to set the hour digits.
After finished making all the settings, press PUSHER D to confirm.
Press PUSHER C once to activate the alarm. Alarm indicator AL1/AL2 will appear. Press again to activate the hourly chime. Chime indicator will appear. Press a third time to activate both functions. Both indicators will appear. Press the fourth time to deactivate both functions. Both indicators will disappear.
NOTE: A tune will go off by the hour if the hourly chime function is activated.
NOTE: An alarm will emit for 20 seconds at the designated time when the alarm is activated. To stop alarm sound, press any button.
MODE 3 STOPWATCH
Press P USHER B to select stopwatch mode. e stopwatch will then be displayed in its current state–reset, running, or stopped.
To resume counting, press PUSHER C to resume from where it left off.
While the stopwatch is running, press PUSHER D once to register a lap. e stopwatch is still running in the background. To display the currently accumulated time, press P USHER D again.
To start a new counting, reset the stopwatch to zero first. Press P USHER C to stop counting, then press PUSHER D to reset counter to zero.
NOTE: You can leave the stopwatch running while switching over to other operating modes.
MODE 4 TIMER
Press PUSHER B to select timer mode.
Press PUSHER D to alter the timer setting among 1, 3, 5, 10, 15, 20, 25, 30, 45 and 60 minutes.
Press PUSHER C to start counting.
Press PUSHER C again to stop counting.
After reaching zero in a countdown, a tune will be emitted. To stop the tune, press any button, the TIMER will reload automatically.
NOTE: You can leave the stopwatch running while switching over to other operating modes.
SPECIFICATIONS
Module Size ：Ф30.0mm
Module Thickness ：6.40mm
Operational Temperature Range : -10~60 C, 14~140 F
Operational Voltage ： 3.0V
Accuracy ： ±30sec/month
Battery Code ： CR2016
Alarm average current ： ≤2.85m A
EL lighten average current ： ≤6.13m A
Battery life ： ≥24-month (Japan Lithium)
Case Width ： 36.5mm
Case Height ： 39.4mm
Case Thickness : 11mm

CAUTION: Keep batteries out of reach of children. If swallowed battery can cause severe or fatal injuries in 2 hours or less. Seek medical advice immediately.

EUROPEAN UNION : DISPOSAL INFORMATION

The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. e separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

CASERATING| 0.1.31S31-1StildS’N It/el| SHALLOWSWIMMING,SUBMERSION| SURFING,SNORKELING,SPEAR FISHING
---|---|---|---
3 0 METER| | |
50 METER| | |
100-200METER| | |
A FEW OF OUR WATCHES ARE GEARED TOWARDS PURE STYLE AND ARE NOT DESIGNED FOR SURF OR SWIM. THIS IS INDICATED BY THE “NO WATER” ICON.

*RINSE WATCH WITH SOAP AND WATER AFTER EXPOSURE TO SALT WATER OR SAND.
Replace the battery at least every two years. Dead or low batteries left in a watch may leak and destroy the movement of your watch. If you have a water resistant watch, know that the water resistance is attained using rubber or plastic seals which will deteriorate under normal conditions and reduce the water resistance of your watch. These seals should be checked by an authorized jeweler at least every two years to ensure the rated water resistancy. Do not expose your watch to extreme temperatures (over 60ºC or 140ºF, under -10ºC or 14ºF). No hot tubs or saunas. Sorry, but do you really need to know the time when you’re tubbing? Avoid extreme shocks.

WARRANTY INFO

Nixon offers a limited warranty on defects in materials and workmanship. when purchased from an authorized Nixon dealer and with proof of purchase (receipt). This means that if the materials in your watch aren’t right or if the watch isn’t put together correctly, we’ll repair or replace it, at our option. But, this doesn’t mean you can abuse your watch and expect us to fix it for free. We don’t cover normal wear and tear or batteries, crystal, watch case, strap, bracelet, loss or theft. You will void your warranty if you open your caseback, push the buttons underwater, or forget to screw down or push in the crown and expose your watch to moisture. For information regarding the length of your warranty, please visit : www.nixonnow.com and select your country’s site. Problems? If you’re in North America, please call us at 760 944 0900 during normal business hours, Pacific Time, and we 1 can work it out. If you’re somewhere else in the world, please contact the store at which you bought your Nixon and they will point you in the right direction. NO IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS, SHALL APPLY TO THIS PRODUCT FOR ANY PERIOD BEYOND THE TWO (2) YEAR TERM OF THIS WRITTEN WARRANTY. NIXON IS NOT LIABLE, UNDER ANY CIRCUMSTANCES, FOR ANY INCIDENTAL DAMAGES SUSTAINED IN CONNECTION WITH THIS PRODUCT. ANY RECOVERY MAY NOT BE GREATER THAN THE PURCHASE PRICE PAID FOR THIS PRODUCT. Some countries and states, however, do not allow the exclusion or limitation on how long an implied warranty lasts or allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country and state to state.

IMPORTANT
Please refer to the watch case back for your watch’s water resistancy rating, or our website:
www.nixon.com