ultralux MSD2460D Dual Function IR Sensor Double User Manual
- June 17, 2024
- ULTRALUX
Table of Contents
MDS2460D
INSTRUCTIONS FOR
EXPLOITATION
DUAL FUNCTION
IR SENSOR, DOUBLE
MSD2460D Dual Function IR Sensor Double
THE INSTALLATION SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN
ACCORDING TO THIS MANUAL. PLEASE KEEP THE INSTRUCTIONS.
TECHNICAL SPECIFICATIONS
| Voltage: | 12/24 V DC |
|---|---|
| Rated load: | 60 W |
| Detections distance: | 5 cm |
| Detection range: | 10° |
| Cable length: | 2 x 1000 mm |
| IP rate: | IP20 |
DESCRIPTION
The product onsist o a small controllerwith 2infrared sensors. There are two
modes ofoperation, whichare changed viaa button ocaed on the housing.
PROXIMITY SENSOR MODE:The sensor detect postion of moving objects
doors,drawers) ffan obstac ocurs withinthe ange of oth sensors (both cabine
doors closing simultaneously), the controlle il turnoff the LED lighting. I
the abstace disappears within the range of on of the sensors (opening of one o
the two abinet doors), the contrller will switch on the LED lighting. The main
application of the product is automation of furiture ED lighting (cabinets,
wardrobes, sheves, drawers, buffts, etc).
PROXIMITY SWITCH MODE:The sensors dtect moving objcts, When thee s a singe
bief movement (hand wave) withinrange of ne f the sensor,then the
contrllrwillturn n the LED lighting. When motion (hand wave) occurs again
within range ofone ofthe sensor,the controllerwill turn ofthe LED lighting
Note: Mfter a power outage and its restoration, the furniture IR sensor
in “PROXIMITY SWITCH MODE” alwaysstarts with the LED lighting tumed off.
SAFETY INSTRUCTIONS
- Performing any actions while electrical voltage s present carries the potential risk of electic shock. The power supply must be disconnected before starting anywork.
- Beforereplacement, disconnect from the electrical grid.
- The installation should be carried out in accordance with the current instructions bya quaifed professioal.
- All conductors and fitting auxiiary components are to be placed at an appropriate distance from the heating parts of the fitting. When choosing the place for mounting,the equired minimun distance must be kept between the fitting and the lightened objcts.
- Thesensori designed fo installation nindoor environment and must be used in places with normallevels of humidity and dust – P20 protection ating.
- The manufacturer bears noresponsibiity for damages rsulting from failureto comply with heseinstructions.
RECESSED INSTALLATION
- Drll 2 hles itha diameterof €8 mmand adepth of 20 mm, then place the sensors intoit
- Drillahole with adiameter of 10 mm and passthe connecting wiresof thesensars throughit.
- Connect the OUTPUT connectorto the load (LEDighting)and connect the INPUT connector to the power supply for the LED lighting.
SURFACE INSTALLATION
- Mount the surface mounting brackets.
- Drilla hole with adiameter of @10 mm and passthe connecting wiresof the sensors throughit.
- Connect the OUTPUT connectorto the load (LEDighting) and connect the INPUT connectorto the power supply or the LED lighting.
NOTES:
- For indoor use only.
- Do not dissemble the product.
- Do not install the product in places with high humidity.
- Use dry cloth, never a strong cleaning agent.
- Replace the whole set in case of malfunction.
- Ensure cooling to prevent a risk of fire.
- The product is intended exclusively for LED lighting.
- After a power outage and subsequent restoration, the product remembers the mode in which it was previously operating.
There is no need to select the mode again.
WRING DIAGRAM
TAKING CARE OF THE NATURAL
ENVIRONMENT CLEANLINESS
The product and its components are not harmful to the environment. Please
dispose the package elements separately in containers for the corresponding
material.
Please dispose the broken product separately in containers for out of usage
electrical equipment.
https://www.ultralux.bg/downloads/upotreba/Instruction-MSD2460D-
web.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>