LANDMANN 23875 Brown Steel Wood Burning Instruction Manual

: July 27, 2024
: LANDMANN

Table of Contents

LANDMANN 23875 Brown Steel Wood Burning
Product Information
Product Usage Instructions
Model
SAFETY INSTRUCTION
PARTS LIST
ASSEMBLY INSTRUCTIONS
HELPFUL HINTS
AVAILABLE ACCESSORIES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANDMANN 23875 Brown Steel Wood Burning

LANDMANN-23875-Brown-Steel-Wood-Burning-Product

Product Information

Product Specifications

Model: Landmann 23875
Assembly Time: 15 minutes
Required Tools: Phillips or plain screwdriver, adjustable wrench
Weight: Not specified
Dimensions: Not specified

Product Usage Instructions

Parts List

(1) Spark Guard
(1) Cooking Grate
(4) Legs
(1) Firebowl
(1) Multipurpose Poker
(3) Ring Sections
(3) Pins
(6) M6 x 25MM Bolts
(8) M6 x 10MM Bolts
(8) M6 Flange Hexnut

Assembly Instructions

Step 1: Assemble the Legs
Attach the legs to the fire pit.
Step 2: Assemble Ring Sections
Connect the ring sections to form the fire pit structure.
Step 3: Place Spark Guard
Install the spark guard on top of the fire pit.
Step 4: Add Sand
Pour 5 lbs of sand into the bottom of the fire pit.

Safety Instructions

Ensure the fire is extinguished before covering the pit.
Avoid burning wood or charcoal in enclosed areas due to carbon monoxide hazard.
Use mittens, poker, or gloves on hot surfaces during use.

FAQ

Q: What should I do if I have trouble with assembly?
A: If you encounter any issues during assembly, please call 1-800-321-3473 for assistance.
Q: Can I use gasoline or alcohol to start fires in the fire pit?
A: No, never use gasoline, alcohol, or volatile fluids to start or restart fires in the fire pit.

Model

23870
23871
23872
23873
23874
23875

PLEASE READ ALL RULES FOR SAFE OPERATION AND HELPFUL HINTS BEFORE USING.

SAFETY INSTRUCTION

READ FIRST!
RULES FOR THE FIRE DANCE BEAR FIRE PIT SAFE OPERATION.

THIS OUTDOOR FIRE PIT IS FOR OUTDOOR USE ONLY!
USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES!
DO NOT USE ON LAWNS, WOODEN DECKS, OR ASPHALT!
KEEP THE OUTDOOR FIRE PIT A MINIMUM OF 10 FT. AWAY FROM BUILDINGS, STRUCTURES, ANY FLAMMABLE ITEMS AND VEHICLES.
NEVER USE UNDER LOW-HANGING TREE BRANCHES, TRELLIS, OR OVERHANGS OF ANY KIND INCLUDING COVERED PORCHES.
WARNING! NEVER USE GASOLINE, ALCOHOL, OR VOLATILE FLUIDS TO START OR RESTART FIRES.
FOR LONGER PRODUCT LIFE, KEEP FIRES TO A RESPECTABLE SIZE, DO NOT OVERLOAD.
THE OUTDOOR FIRE PIT IS FOR ADULT USE ONLY.
DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
DO NOT MOVE THE FIRE PIT DURING USE.
DO NOT USE IN WINDY CONDITIONS!
DO NOT OVERLOAD OR USE FOR BURNING GARBAGE.
USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BECOME VERY HOT WHILE IN USE.
USE MITTENS OR GLOVES WITH THE POKER TO REMOVE THE SPARK GUARD, THE SPARK GUARD WILL BECOME VERY HOT!!
USE CAUTION WHEN REMOVING THE SPARK GUARD, AS HOT STEAM OR A FLARE-UP COULD CAUSE BURNS.
BEFORE EACH USE MAKE SURE THE OUTDOOR FIRE PIT IS IN GOOD WORKING CONDITION.
USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL REMAIN HOT FOR SOME TIME.
THE OUTDOOR FIRE PIT MUST BE COMPLETELY COOLED OFF AND ALL EMBERS MUST BE EXTINGUISHED BEFORE ANY COVER CAN BE USED.

PARTS LIST

When unpacking the fire pit from the carton, make sure you find and become familiar with all the parts listed below. Use caution as some parts may have sharp edges.

$LANDMANN-23875-Brown-Steel-Wood-Burning-Fig- $1$$

ASSEMBLY INSTRUCTIONS

A Phillips or plain screwdriver and an adjustable wrench are needed for assembly.

Assembly time: 15 minutes

STEP 1: ASSEMBLE THE LEGS
Take each of the (4) legs [ EE ] and assemble them to the fire bowl [ C ] as shown using (8) 10MM bolts [ X ] and (8) hex nuts [ Z ].
STEP 2: ASSEMBLE RING SECTIONS
Assemble (1) ring section [ DD ] to the firebowl [ C ] using (2) 25MM bolts [ J ]. For each ring section, assemble (1) pin [ M ] as shown between the bolt and the fire bowl. Assemble the remaining (2) ring sections the same way. Be sure the pins are evenly spaced. Hand-tighten the bolts only until all ring sections are assembled, then tighten all bolts securely.
STEP 3: PLACE SPARK GUARD
Place the spark guard [ A ] onto the pins [ M ]. The spark guard keeps sparks contained in the fire pit. PLEASE USE at all times.
STEP 4: ADD SAND
Before using, add a 1-1.5 in. layer of sand or about 5 lbs. (size-wise, it’s the same amount as a 5 lb. bag of sugar) to the bottom of the fire bowl. This will help against the corrosive nature of the ashes and help radiate the heat upwards. $LANDMANN-23875-Brown-Steel-Wood-Burning-Fig- $3$$

DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.

COOKING GRATE
Remove the spark guard from the fire pit. Align and place the cooking grate [ B ] onto the (3) pins [ M ]. The pins will keep the cooking grate in position. Never burn wood on the cooking grate.

IMPORTANT!
ADD 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL.

WARNING!

CARBON MONOXIDE HAZARD!
BURNING WOOD OR CHARCOAL PRODUCES CARBON MONOXIDE, WHICH HAS NO ODOR AND CAN CAUSE DEATH IF BURNED IN ENCLOSED AREAS. NEVER BURN WOOD OR CHARCOAL INSIDE HOMES, VEHICLES, TENTS OR ANY OTHER ENCLOSED AREAS.

HELPFUL HINTS

ADDING 5 LBS OF SAND TO THE BOTTOM OF THE FIREBOWL WILL EXTEND THE FIREBOWL LIFE.
KEEP THE FIRE PIT OUT OF THE WEATHER AND ELEMENTS.
STORE THE FIRE PIT IN A DRY LOCATION OUT OF THE WEATHER.
DO NOT LET THE FIREBOWL FILL WITH WATER.
DO NOT DUMP ASHES WHERE A FIRE CAN BE STARTED.
DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.
USE ANY COVER ONLY AFTER THE FIRE PIT IS COMPLETELY COOL TO THE TOUCH.

$LANDMANN-23875-Brown-Steel-Wood-Burning-Fig- $5$$ $LANDMANN-23875-Brown-Steel-Wood-Burning-Fig- $6$$

Congratulations on your purchase of the Firedance Bears Fire Pit! At Landmann USA, we strive to provide you with an easy-to-use, easy-to-assemble product. However, in the unlikely event your package should have a missing or defective part, please contact us at: customerservice@landmann- usa.com -OR- 1-800-321-3473 M-F 8-5 ET.

Proof of purchase may be required.
Thank you!