ZERO-G LCD Watch Instruction Manual
- June 4, 2024
- ZERO-G
Table of Contents
ZERO-G LCD Watch
How to set the time
- Hold Key B for about 5 seconds, the Hour segment will blink (Minute segment is not blinking): press Key A to increase the Hours,
- Press Key B to confirm and move to Minute segments
- Press Key A to increase the Minutes, Press Key B to confirm and exit.
Battery replacement
- One Lithium battery CR1620 provides the power to operate the lights
- If you notice your watch’s light is getting dimmer, this is an indication that your battery needs to be replaced
- Do not wait until your watch stops functioning
- Weak or dead battery left in your product for an extended time may damage the movement
- To avoid the possibility of damaging your product, we recommend that you send it to watch specialist to have the battery replaced and the case back properly sealed
Cautions
- Don’t press buttons under water nor with excessive moisture on the product surface.
- Avoid long-term exposure to extreme temperature, direct sunlight. This can cause material coloring to fade or discoloration.
- Please avoid rough use or dropping this product. Do not use strong detergent, sprays or chemicals as this will dis-color the case or strap.
- To clean your watch use only soft cloth, moistened lightly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>