Hatari AC Max Air Cooler with Remote Control User Manual
- June 5, 2024
- Hatari
Table of Contents
AC Max Air Cooler with Remote Control
User Manual
Product Specification
| Model | AC Max |
|---|---|
| Size | 300 mm |
| Voltage | 220V 50Hz |
| Electric Power | 133W |
| Electric Current | 0.63A |
| Insulation Class | F |
Retail Price (Baht)
The price includes VAT| 6,895.-
FAN COMPONENTS
-
CORD WINDER
-
CONTROL AND DISPLAY PANEL
-
HANDLE
-
WIND DIRECTION SHUTTERS
-
FRONT COVER
-
WATER TANK
-
WATER LEVEL WINDOW
-
WHEELS (2 back wheels with brakes)
-
PRE-FILTERS
· SIDE 2 PIECES
· BACK 1 PIECES -
SIDE GRILLES (LEFT-RIGHT)
-
BACK GRILLE
-
WATER DIFFUSING PLATE
· SIDE 2 PIECES
· BACK 1 PIECE -
WATER TANK LID
-
POWER SUPPLY CORD & PLUG
-
TOP COVER
-
WATER DRAIN LID
-
REMOTE CONTROL
-
GEL PACK 2 PIECES
-
SPACE FOR REMOTE CONTROL
WHEELS INSTALLATION
Make sure that the water tank is empty and that the power supply cord is not plugged in. On a flat surface, place the air cooler on its side and push the wheels into the indicated positions. Install the 2 wheels with brakes at the back and the other two at the front of the machine.
DIRECTION OF USE
This fan is operated by a touch screen system and remote control. The touch
screen system can be activated using fingers to touch the control and display
panel. When the machine is left idle for 20 seconds, the operating lights will
dim but the fan will still be operating as normal. By simply touching the
control and display panel, the lights will illuminate and the fan will be
ready to be adjusted again. Remote control, point the remote signal
transmitter in the direction of the signal receiver on the control and display
panel. Avoid having obstructions between the remote signal transmitter and the
receiver.
Plug the power supply cord into a 220V, 50Hz power socket.
1. ON/OFF| Touch the switch on the control and display panel to turn on the
fan. The light will show the resumed settings of the fan’s latest operation
before having been switched off. To turn the fan off, touch the switch again
for about 1 second
---|---
2. SPEED| 5 adjustable fan speed settings 0: off,1: lowest speed, 2: low
speed, 3: medium speed, 4: high speed, 5:highest speed, respectively.
3. TIMER| Switch for timing the fan’s operation: 1, 2, 4, 8 hours or to
cancel timing altogether, respective to the number of time the sensor is
touched. Once set, the timer will indicate the remaining time left of the
duration.
3.1 TIMER OFF| Set the timer while the fan is switched on to set the time when
the fan is to automatically turn off.
3.2 TIMER ON| Set the timer while the fan is turned off (but it must be plugged
in) to set the time when the fan is to automatically turn on. After adjusting
the settings, the operating lights will dim. When the time comes, the fan will
resume settings of the latest operation before having been switched off.
4. COOL| Switch for activating the water cooling system. Touch the switch to
activate the function. Touch the switch again to deactivate the function.
5. SWING| Switch for adjusting left to right swinging motions. Touch the
switch to activate the function. Touch the switch again to deactivate the
function.
6. AMBIENT LIGHT| Ambient light on/off switch. Touch the switch to turn on the
light. Touch the switch again to turn off the light. To use the ambient light
while the fan is switched off (but it must be plugged in), touch the switch,
the lights will illuminate, and the fan will be ready to be adjusted. Touch
the switch again to turn on the ambient light.
7. AMBIENT LIGHT COLOR| Switch for changing the color of the ambient light.
Touch the switch to change the color (White – Blue – Pink – Green)
respectively. To use this function, the ambient light has to be turned on.
(This function can be controlled on the control and display panel only)
8. BRIGHTNESS CONTROL| Switch for adjusting the brightness of the ambient
light. Can adjust the brightness in 3 levels (High brightness – Medium
brightness – Low brightness).
9. FILL WATER| A warning will light up when the water level in the tank is
too low for the water distribution system to function (unable to activate COOL
function). Turn off and unplug the machine to fill the water tank with clean
water (do not exceed MAX level). The warning light will go off when the machine
is turned on and the COOL function is activated.
10. ELCB| A warning with a warning sound will appear when there is
electricity leakage. The circuit breaker system will immediately be activated.
11. DRYING| The drying light will light up when the fan is switched off while
the COOL function is activated, the fan will continue to operate for 60
seconds to remove moisture. The temperature display will show a countdown of
60 seconds, after which the fan will stop automatically.
12. TEMPERATURE| Temperature display for the surrounding area of the fan
while the fan is turned off or on (but it must be plugged in)
HOW TO REPLACE THE REMOTE CONTROL BATTERY
Open the battery cover by using your fingernail to push the catch downwards as shown by the arrow and remove the battery cover. Replace the used batteries with new “AAA” batteries, ensuring that the positive (+) and negative (-) poles are correctly inserted and correspond with the symbols on the remote control. Place the battery cover back in its original position.
*Batteries should be removed from the remote control when not in use for a long period of time.
CAUTION
- Unplug the fan before water filling, cleaning, or changing the components, and when not in use for a long period of time.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experiences and knowledge unless they have been given supervision or instruction concerning the use of the appliance.
- Children should be supervised to ensure they do not play with the appliance.
CARE AND CLEANING INSTRUCTIONS
- Use a damp cloth to wipe stains, and then dry the area by wiping.
- When cleaning, be careful not to let the wire, switch, motor, and other electrical components get wet.
- Do not use chemical products, thinner solvents, alcohol, kerosene or petrol to clean the fan.
- The water tank, pre-filter, grilles, and water tank can be cleaned with water or soapy water. It should be cleaned at least every 1-2 months.
HOW TO REMOVE THE GRILLE
Use a screwdriver to loosen the screws holding the grille in place (Back
grille – 2 screws, Side grille – 1 screw). Hold the grille in the area marked
“PULL HERE” and pull the grille outward. Repeat for the other grilles.
HOW TO CLEAN THE PRE-FILTER (3 PRE-FILTER)
Use your hands to hold the pre-filter and slide it upwards according to the direction of the arrows. Clean the pre-filter with water or soapy water and leave it to dry.
**** USAGE RECOMMENDATIONS
-
The fan should not be placed or installed in areas that are of extreme temperatures or near stoves, or in areas that are wet with high humidity, or has hydrocarbon vapors such as petroleum.
-
Do not spray all types of spray into the fan; for example, hairspray or cleaning spray.
-
Do not insert fingers, pencils or other objects into the grille while the blades are spinning as it may result in possible injury or physical damage.
-
If an electrical component such as a supply cord, motor, or switch is damaged, it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard. It is not advisable to fix the fan at home. -
The fan must always be placed vertically; it must never be lying horizontally or placed upside down. If the fan falls down,
unplug it immediately and lift the fan up to a vertical standing position. Use a cloth to wipe the fan and leave it to dry in order to prevent electrocution.
USAGE PRECAUTIONS
Use only clean water to fill the water tank. Do not use any other liquid. The water tank should be cleaned regularly to reduce bacteria buildup.
Loosen the screws and pull open the water tank lid to fill with water before
inserting the gel back (frozen).
Constantly check the water level in the tank, making sure that it is not below
the MIN level and not above the MAX level.
If the fan is not in use for a long period of time, drain out all the water by twisting open the water drain lid. Securely close the lid back after to prevent dust and insects from entering the water tank.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>