Arlux 760056 Lex Rechargeable Lighting Instruction Manual
- June 12, 2024
- Arlux
Table of Contents
Arlux 760056 Lex Rechargeable Lighting
Product Information
- Product Name: LEX
- Languages: FR (French), EN (English), DE (German), IT (Italian), ES (Spanish), PL (Polish)
- Model Number: 3297027600567
- Power: 1.7W
- Light Output: > 80 lumens
- Protection Rating: IP20
- Dimensions: 35×4.6×1.4 cm
Product Usage Instructions
- Make sure the product is properly connected to a power source.
- Choose the desired language by selecting the corresponding option on the product interface.
- To turn on the product, press the power button located on the device.
- Adjust the brightness level as needed using the provided controls.
- Ensure that the product is used in a dry indoor environment to maintain its IP20 protection rating.
- Place the product in a suitable location where it can provide adequate lighting.
- Keep the product away from water or any other liquids to prevent damage.
- If experiencing any issues or difficulties, refer to the user manual for troubleshooting steps or contact customer support.
Instructions for use
Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockists for advice on recycling.
Batteries must be recycled or disposed of in an appropriate manner. Do not dispose of batteries in household garbage, municipal waste, or on fire, as they may leak or explode. Do not open, short circuit, or damage the batteries, as this may cause injury.
The product conforms to European Union Directives
Class III, equipment supplied at a voltage of less than 50 volts
General safety instructions
- Check that the product is not damaged before handling. Switch off the product before handling it.
- Do not expose the product to strong heat. Do not throw in the fire
- Do not look directly at the light source.
- Regularly clean the product using a soft, slightly damp, lint-free cloth.
- Before first use, fully charge the battery.
- Do not leave the charger plugged in indefinitely after the battery has been full. charged.
- Batteries should not be opened, destroyed, or incinerated as they may leak rupture, and release toxic gases and chemical compounds. Do not throw it into the fire.
- Do not expose the batteries close to heat sources.
- Do not store the product in a damp or wet place, or in a place where the temperature is likely to reach or exceed 40°C. For example, in an outdoor shed, vehicle, or sheet metal building during the summer.
- Do not use or dispose of the product in water or any other liquid.
- The battery of this product is replaceable by a professional or qualified person.
- Use a battery of the same type and specifications.
- Battery life may vary depending on the light intensity chosen.
- For good detection, make sure the sensor is clean
Switch on the device. Then hold your hand in front of the sensor for a long time to increase or decrease the light intensity Test the detection distance before the final installation.