ECR4Kids UL2818G FM SoftZone All Around Activity Mat Installation Guide
- June 17, 2024
- ECR4Kids
Table of Contents
ECR4Kids UL2818G FM SoftZone All Around Activity Mat
Specifications
- Certificate Number: 270119-420
- Certificate Period: 08 Jun 2022 – 12 Jul 2024
- Certified Status: UL 2818 – 2022 Gold Standard for Chemical
- Emissions for Building Materials, Finishes and Furnishings
- GREENGUARD Gold Certification Criteria for Furniture and Mattresses
- Maximum Allowable Predicted Concentration:
- TVOC: 0.22
- Formaldehyde: 9 (7.3 ppb)
- Total Aldehydes: 0.043
- 4-Phenylcyclohexene: 6.5
- 1-Methyl-2-pyrrolidinone: 160
Classroom furniture and furnishings are modelled to the classroom environment with a room volume of 231 m³ and 0.82 air changes per hour (ACH) accommodating 27 students. The product was tested by the UL 2821 test method to show compliance with emission limits on UL 2818. Section 7.1 and 7.2.
GREENGUARD Gold Certification Criteria for Furniture and Mattresses
- Defined to be the total response of measured VOCs falling within the C6 – C16 range, with responses calibrated to a toluene surrogate.
- The sum of all measured normal aldehydes from formaldehyde through nonanal, plus benzaldehyde, individually calibrated to a compound-specific standard.
- Heptanal through nonanal is measured via TD/GC/MS analysis and the remaining aldehydes are measured using HPLC/UV analysis.
- Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation of 3,200 ʅg/day and an inhalation rate of 20 m³/day.
- Allowable levels for chemicals not listed are derived from the lower of 1/2 the California Office of Environmental Health Hazard Assessment (OEHHA)
- Chronic Reference Exposure Level (CREL) as required per the CDPH/EHLB/Standard Method v1.2 and BIFMA level credit 7.6.2 and 1/100th of the
- Threshold Limit Value (TLV) industrial workplace standard (Reference: American Conference of Government Industrial Hygienists, 6500 Glenway, Building D-7, and Cincinnati, OH 45211-4438).
Assembly
Follow the provided assembly instructions carefully to ensure proper setup.
Cleaning and Maintenance
Use a mild detergent and a soft cloth to clean the product. Avoid harsh chemicals that may damage the surface.
Safety Precautions
Keep the product away from heat sources and direct sunlight. Ensure proper
ventilation in the room where the product is placed.
Storage
Store the product in a dry and cool place when not in use to prevent damage.
UL investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements per the agreements and any applicable program service terms in place between UL and the Certificate Holder (collectively “Agreement”). The Certificate Holder is authorized to use the UL Mark for the identified Product(s) manufactured at the production site(s) covered by the UL Test Report, by the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with the Agreement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>