COOSPO BK9S Cycling Speed Sensor User Guide

COOSPO BK9S Cycling Speed ​​Sensor

Specifications

• Model: BK9S
• Battery Type: CR2032, 3V
• Battery Life: 300 hours
• Wireless Transmission: Bluetooth 5.0; ANT+
• Waterproof: IP67

Product Usage Instructions

Facility

1. Remove the transparent insulation sheet.
2. Place the sensor on the rear or front hub of the bike.
3. Wrap the silicone strap around the hub and snap it onto the lugs of the sensor.
4. Turn the wheel to ensure that the sensor does not rub against the bike.

Notes:

1. The blue light indicates the device is enabled.
2. Ensure secure installation to avoid damage or loss during your ride.

Pairing

Note: The sensor will go into sleep mode after a period of inactivity. Turn the wheel to wake it up before pairing.

Connect to cycling apps (Bluetooth)

1. Turn on Bluetooth and location service on your phone.
2. Find the sensor settings menu in the cycling app.
3. Select the BK9S Bluetooth ID in the app to connect.

Connect to smart devices (Bluetooth and ANT+)

1. Select Add Sensor from the smart device settings menu.
2. Select BK9S Bluetooth or ANT+ ID to connect.

Functions and Status

Light Flashing

Frequently Asked Questions (FAQ)

• Q: How do I know if the sensor is properly installed?
  A: The blue light indicates that the sensor is enabled. Ensure it is securely installed and not rubbing against any parts of the bike.

• Q: What should I do if the sensor goes into sleep mode?
  A: Turn the wheel to wake it up before pairing with your device.

• Q: How do I pair the sensor with my cycling app?
  A: Turn on Bluetooth and location services on your phone, find the sensor settings menu in the app, and select the BK9S Bluetooth ID to connect.

SCAN for more

Standard Accessories

Installation

Please remove the transparent insulation sheet first

1. Place the sensor on the rear or front hub of the bike.
2. Wrap the silicone strap around the hub and snap it onto the lugs of the sensor.
3. Turn the wheel to ensure that the sensor does not rub against the bike.

Notes:

1. The blue light on means the device is enabled.
2. Make sure it is securely installed and not touching or rubbing against any other parts of the bike to avoid damage or loss during your ride.

Pairing

Note : The sensor will go into sleep mode after a period of inactivity. Please turn the wheel to wake it up before pairing.

Connect to cycling apps

1. Turn on the Bluetooth and location service on your phone.
   Note : Do not pair the sensor in the Bluetooth settings of your phone.

2. Find the sensor settings menu in cycling app.
   For example, Go to CoospoRide App > More > Sensors > Select the sensor or use another app to “Add Device”

3. Find the BK9S Bluetooth ID and select it in the app to connect.

Connect to smart devices such as bike computer (Bluetooth and ANT+)

1. Select “Add Sensor” from the smart device settings menu.
2. Find BK9S Bluetooth or ANT+ ID and select it to connect.

Functions and Status

Specifications

Note : The actual battery life depends on the usage environment. For more information, please refer to www.coospo.com.

Disclaimer

• The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without announcing in advance.
• We shall not make any statement or warranty about this manual.

FCC statement

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

References

• Cycling and Fitness Training Products – COOSPO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>