LITETRONICS ALADFM Area Light Direct Fixed Mount Instruction Manual
- May 15, 2024
- Litetronics
Table of Contents
LITETRONICS ALADFM Area Light Direct Fixed Mount
SAFETY INSTRUCTIONS AND WARNINGS
- When using electrical equipment, basic safety precautions should always be observed.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
- Be certain electrical power is OFF before and during installation and maintenance.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.
WHAT COMES IN THE BOX
Direct Fixed Mount
M8 * 25mm (x4)
Spring Washer (x4)
Flat Washer (x4)
Ground Washer (x1)
Installation Instructions
REQUIRED TOOLS
Allen Wrench
INSTRUCTIONS
Before Installation, carefully remove all parts from the packaging. Inspect
product for defects due to shipping.
Always turn off the power supply from main circuit breaker first!
DIRECT FIXED MOUNT INSTALLATION
-
Open the side slid be removing the four screws. (Figure 1)
-
Pass the wires through the direct fixed mount (watch out not to scratch the wire).
-
Lock the direct fix mount on the fixture. (Figure 2)
DIRECT FIXED MOUNT SQUARE POLE INSTALLATION
- Unscrew and remove round pole plate and round silicon gasket from the back of the mount. (Figure 4)
- Affix the direct fixed mount to the square pole, pull the wire from pole into junction box, and connect the wires accordingly (refer to area light installation instructions for wiring diagram). (Figure 5)
- Use four screws to close side lid back in place.
- Installation complete. (Figure 6)
- Turn power back on.
DIRECT FIXED MOUNT ROUND POLE INSTALLATION
- For round pole installation, leave round pole plate and gasket installed and follow the previous steps for wiring directions. (Figure 7)
ALADFM -150W,200W Hole Pattern
Note: All measurements in MM.
CUSTOMER SUPPORT
Thank you for choosing
6969 W. 73rd Street Bedford Park, IL 60638
WWW.LITETRONICS.COM
[email protected] or
1-800-860-339
The information and product specifications contained in these instructions are
based upon data believed to be accurate at the time of printing. This
information is subject to change without notice and without incurring
liability. If you have questions regarding specific product details, please
contact us at 800-860-3392 or via email
at [email protected].
To check for an updated version of these instructions, please visit
www.litetronics.com.