Tribesigns HOGA-XK00432 3 Drawers Nightstand Instruction Manual
- June 17, 2024
- Tribesigns
Table of Contents
LITTLE TREE
Assembly Instructions
HOGA-XK00432 3 Drawers Nightstand
Model No. HOGA-XK00432
Ninghtstand
Call us!
We’re here to help!
If you have any issues with this product, please contact our customer service
team before returning it.
support@tribesigns.com
1-424-220-6888
We want you to be completely satisfied with your purchase! If anything is
missing, damaged, incor-rect, or not what you expected, don’t worry.
Please keep the outer packaging and take photos of both the packaging and
products, and then reach out to us at
support@tribesigns.com or call us at
1-424-220-6888. We’ll take care of
everything and send you a free replacement, so you can enjoy your purchase as
soon as possible without any hassle.
Assembly Instructions:
- Carefully read these instructions and keep them for future reference.
- Refer to the parts list for guidance and ensure that you have all the pieces before starting the assembly process, if anything is missing, damaged, incorrect, contact us FIRSTLY BEFORE assembling.
- When assembling, place all parts on a soft, clean, and flat surface, such as a carpet, to prevent any scratches.
- To avoid misalignment of the holes, Please don’t full tighten the screws until you ensure all parts in place.
Follow Tribesign:
| https://www.facebook.com/Tribesigns
---|---
| https://twitter.com/Tribesigns
| https://www.pinterest.com/tribesignsOfficial
| https://www.youtube.com/channel/UCdSxto_YQL1SJlxZhHhLepA
| https://www.instagram.com/tribesigns/
When using the electric
screwdriver , Reduce the power and torque to avoid damaging the
furniture
( Install tip-over restraint
provided）
Use of tip-over restraints may only reduce but not eliminate, the risk of tip-
over.
Caution
Make sure all parts are included. Most board parts are labeled or stamped on
the raw edge. Contach us for free replacement if having damaged or missing
parts.
Parts & Hardware List
Hardware List
Installation of Cams and Pins
Screw the pin into the hole. To set the cams correctly, ensure that the arrow
on the cam is opening to the hole of the pin it is locking. Lock the cam by
turning the cam head with a screwdriver until it is tightened. Please do not
use an electric screwdriver to assemble the unit.
Read each step
carefully before starting. It is very important that each step of instruction
is performed in the correct order. If these steps are not followed in
sequence, assembly difficulties will occur.
No heartburn, when we handlethe return
Our way
support@tribesigns.com
Replacement/Refund
You
Their way
Re-package item
Schedule pick-up
Track package
Replacement
You
Contact our customer service team
| support@tribesigns.com
www.tribesigns.com
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>