Kundalini Shakti 200 Stehleuchte Instruction Manual
- June 17, 2024
- Kundalini
Table of Contents
Kundalini Shakti 200 Stehleuchte
Product Information
Specifications:
- Bulbs: 2 x 100W max – E26
- Feeding: 120 V
Product Usage Instructions
Assembly Instructions:
- Open Box N.1 and Box N.2 to access all components.
- Refer to the instruction manual for step-by-step assembly guidance.
- Ensure all parts are securely connected and tightened.
Installation :
- Identify a suitable location for the product, ensuring proper ventilation.
- Connect the product to a power source of 120 V.
- Insert the compatible E26 bulbs (2 x 100W max) into the designated sockets.
Usage:
- Turn on the power source to activate the product.
- Adjust the brightness as desired using the appropriate controls.
- Avoid touching the bulbs when they are hot.
FAQ
-
Q: What should I do if the bulbs need replacement?
A: Turn off the power source, allow the bulbs to cool down, then carefully replace them following the manufacturer’s guidelines. -
Q: Can I use bulbs with wattage higher than 100W?
A: It is recommended to only use bulbs with a maximum wattage of 100W to prevent damage to the product.
ASSEMBLY INSTRUCTIONS
WARNING
- The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
- Always disconnect the main voltage before working on the appliance.
- Never use abrasive products or aggressive detergents for cleaning the lamp.
- If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
- Kundalini will not provide a replacement until the nature of defect has been determined.
ASSEMBLY INSTRUCTIONS
BOX N.1
BOX N.2
- BULBS 2 x 100W max – E26
- FEEDING 120 V
Viale L. da Vinci, 277
20090 Trezzano sul Naviglio, Milano T. +39 0236538950
info@kundalini.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>