Kundalini Kushi XL Pendant Light Instruction Manual
- June 17, 2024
- Kundalini
Table of Contents
Kundalini Kushi XL Pendant Light
Product Information
Specifications
- Product Name: KUSHI XL SUSPENSION
- Designers: Alberto Saggia & Valerio Sommella
- Revision: 02 – April 2022
- Power: 2 x 70W max
- Socket Type: E27
- Voltage: 220-240V
- Manufacturer: Kdln Srl
- Address: Viale L. da Vinci, 277 20090 Trezzano sul Naviglio, Milano
- Contact: T. +39 0236538950, Email: info@kdln.it
- Website: kdln.it
Product Usage Instructions
- Unpack the contents of Box N.1 and Box N.2.
- Identify components numbered from 1 to 9 for assembly.
- Follow the provided assembly instructions carefully.
- Install the bulbs (lampadine) with a maximum power of 70W each into the E27 sockets.
- Ensure the voltage input is within the range of 220-240 V.
- For any assistance or inquiries, refer to the manufacturer’s contact details.
Frequently Asked Questions
Q: What should I do if the product is missing parts?
A: In case of missing parts, please contact our customer service for assistance in obtaining the required components.
Q: Can I use bulbs with a wattage higher than 70W?
A: It is recommended to use bulbs with a maximum power of 70W to prevent damage to the product and ensure safe operation.
Q: How do I clean the KUSHI XL SUSPENSION?
A: To clean the suspension, switch off the power, allow it to cool down, then gently wipe the surface with a soft cloth. Avoid using abrasive cleaners.
WARNING
- Place the plastic gasket between the glass and the rod then screw the rod until blocking the glass. Don’t force to avoid creating strains on the glass.
- The safety is guaranteed by the appropriate use of the following instructions, so you must keep them.
- Always disconnect the main voltage before working on the appliance.
- Never use abrasive products or aggressive detergents for cleaning the lamp.
- If the external cable of this appliance is damaged, it must be replaced by the manufacturer, its after sales service or other equivalent qualified person only in order to avoid any danger.
- KDLN will not provide a replacement until the nature of defect has been determined.
ASSEMBLY INSTRUCTIONS
If the lamp is distorted, turn the glass structure on the support until a balance point is reached – Fig.9 -. To find the exact balance point, repeat steps in – Fig.7 and 8 -.
AMPOULES
2 x70W max – E27
ALIMENTAZIONE
220-240 V
Kdln Srl Viale L. da Vinci, 277 20090 Trezzano sul Naviglio, Milano T. +39 0236538950 info@kdln.it