bimar HP130 Column PTC Fan Heater Instruction Manual

: June 17, 2024
: bimar

Table of Contents

bimar HP130 Column PTC Fan Heater
Product Usage Instructions
INSTALLATION
Use
Control panel
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

bimar HP130 Column PTC Fan Heater

Product Specifications

Product Name: PTC Fan Heater
Manufacturer: Bimar Italy
Model Number: PTC-1000
Power: 1000W
Voltage: 220-240V
Frequency: 50-60Hz

Product Usage Instructions

Safety Instructions
Before using the PTC Fan Heater, carefully read all the instructions in this manual. Keep the booklet for future reference. If you have any difficulty understanding any part of the instructions or have doubts, contact the company using the address provided on the last page.

Important Symbols

Symbol 1: Read instructions before use.
Symbol 2: Safety instructions and warnings.
Symbol 3: Instructions to prevent danger.

Warnings and Precautions

Do not cover the appliance to prevent overheating.
Some parts of the product can become very hot.
Do not place the appliance directly below a power outlet. The power outlet should be easily accessible and not near water sources like bathtubs, showers, sinks, etc.
Never immerse the plug, power cord, or the appliance in water or any other liquid to avoid the risk of electric shock.
Check regularly that the intake grille is not obstructed by objects or fabrics to prevent overheating or damage to the appliance.

Operating Instructions
The On/Off switch is located at the back of the appliance. Position I turns on the heater, and position O turns it off.

Frequently Asked Questions (FAQ)

Q: Can I leave the PTC Fan Heater unattended while in use?
A: It is recommended not to leave the heater unattended while in use for safety reasons. Always turn off the appliance when not in use.
Q: How do I clean the PTC Fan Heater?
A: Ensure the heater is unplugged and completely cooled down before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use any liquid cleaners on the appliance.

|

O/I switch. It’s back part, it switches on (pos. I) or switches off (pos. 0) the appliance.

---|---
|

Standby/OFF

The key (ON) switche on the appliance or puts it in standby.

-Note: the last selected mode is activated

| Heating Mode

When “ON”, the key selects the following modes one after the other: Hi -> Low -> Eco. HI=2000W= very hot air

LO=1000W= hot air

“ECO“: depending on the difference between the set and room temperatures (∆T), the programme activates the HI (2000W) or LO (1000W) power or the fan only. When the temperature set is: (∆T) > 4°C degrees from the room temperature, the HI function is activated; 4°C > (∆T) > 2°C degrees from the room temperature, the LO function is activated; (∆T) < 4°C degrees from the room temperature, the fan function is activated. Once the required temperature has been reached, ventilation only continues for a few seconds and then switches off.

Furthermore, if the key is pressed for 3 seconds, the Right-Left automatic swing is activated and/or deactivated.

| Temperature and Time Setting. Key diminishes, key increases. With the convection heater switched on, adjust the room temperature (5 – 45°C) with the two keys, and once the value is reached the thermostat will interrupt the heating. When the temperature decreases, the thermostat will turn the resistance back on for the time necessary to restore the value.
| Timer. In the “ON ” state, the key activates the Timer and its “Countdown”. Once it expires the convection heater will go into Standby. The time can be adjusted from 1h to 24h using the keys . To reset the Timer, press the button for about 3

seconds to put it in standby.

NOTE. The timer is subject to programming (daily/weekly) carried out via the APP: if this is in progress, suspend it for the period in which the timer will be active.

| Wi-Fi Key

Once the Wi-Fi configuration has been performed (see below), the functions of the convection heater and the weekly programming can be controlled with the smartphone and the “Bimar Live Smart” APP.

The key activates the Reset of the Wi-Fi configuration.

Some functions are manageable with the Alexa and Google Assistant voice control.

TERMOVENTILATORE PTC PTC FAN HEATER
type HP130 (mod. FH129E)
This product is only suitable for well insulated spaces or occasional use.

This symbol indicates that these instructions should be read carefully before using the appliance, and that other users should also be informed of them, if necessary. Store this booklet for future reference and for the entire lifetime of the device. If any parts of these instructions are difficult to understand or when in doubt, contact the manufacturer at the address found on the last page before using the product.
This symbol highlights instructions and precautions for safe use. Warnings and appliance installation, use, cleaning and maintenance procedures may be updated slightly from those described in this manual; for further details, please consult the updated online manual at www.bimaritaly.it.
This symbol indicates that the appliance is class II.
This symbol indicates: WARNING : in order to avoid overheating, do not cover the appliance.

WARNINGS

This appliance is designed to only heat indoor domestic and similar environments, as specified in these instructions; furthermore the fan heater is to be considered an additional heating unit, and not a source of primary / central heating.
Examples of appliances for domestic use are those used for common domestic purposes, in domestic environments and that can be used by non-experts:
- in shops, offices and other similar places of work;
- in farming businesses or similar businesses;
- by guests in hotels, motels and other residential type environments
- in bed and breakfast accommodation.
This fan heater is a radio device which intentionally emits and/or receives radio waves for radiocommunication and/or radiodetermination purposes.
The appliance should not be used in dusty areas or in areas with airborne particles/materials (which may block the grids), or in areas with high humidity, or with flammable products, or outdoors. Any other use should be considered inappropriate and dangerous. The manufacturer cannot be held responsible for any damages caused by improper, incorrect or irresponsible use and/or by repairs done by an unqualified person.
The fan heaters gets hot when in use. Only touch the plastic handle and knobs. Avoid touching the grid since it becomes very hot. Do not insert fingers and/or any object through the front grid, in order to prevent abrasions, electric shocks or damage to the appliance.
The grille does not provide complete protection to children or to people with reduced physical, sensory or mental capacity.
WARNING!
- Parts of this product can become hot and cause burns. Special care should be taken in the presence of children and vulnerable people.
- when using electrical appliances, always adhere to basic safety precautions to prevent the risk of fire, electric shocks and physical injury.
- Do not use this appliance in a room with an area of less than 4m².
The appliance can be used by children over 8 and by people whose physical, mental or emotional capacity is limited or compromised, or who lack the appropriate experience or knowledge, only if they are supervised after receiving instructions about safe use of the appliance and they understand the hazards. Children must not play with the appliance. Cleaning and maintenance that must be carried out by the user must not be done by children unless they are supervised.
Children younger than 3 years of age must be kept away from the appliance unless they are being constantly supervised. Children between the ages of 3 and 8 years should only turn on / off the appliance as long as it has been placed or installed in its normal operating position, and as long as they are supervised or receive instructions concerning the safe use of the appliance and understand the hazards involved. Children between the ages of 3 and 8 years should not plug it in, adjust or clean the appliance or perform user maintenance.
Make sure the fan heater does not come into contact with water or any other liquid. If water or any other liquid comes into contact with the appliance, first turn off the power by switching it off at the distribution board, and only then remove the plug from the socket. Carefully dry both the plug and the socket before restoring power. Plug into the mains and then continue using the appliance. If in doubt consult a qualified professional.

Danger:

The appliance must not be placed directly beneath a plug point.
The plug point must be accessible so as to easily remove the plug in case of an emergency.
Do not use the appliance near a bathtub, a shower, swimming pool or basin/sink, etc.
If the power cord is damaged, it must be replaced by the manufacturer or its technical assistance centre or by someone who is similarly qualified, in order to prevent any risks.
This appliance is not to be used with an external timer or with a separate distance control unit. This serves to prevent fire hazards should the appliance be covered or incorrectly positioned. Check that other devices with high power consumption are not connected on the same circuit.

In order to prevent electric shocks, never immerse the plug, the power cord or the appliance in water or any other liquid.
If the appliance is not being used, unplug it from the plug point.
Do not touch the appliance with wet hands or feet.
Do not move the appliance when it is running.
Do not allow the appliance to be exposed to the weather (sun, rain, etc.).
Should the appliance fail or not work correctly, disconnect the power cord immediately. Check that it is not damaged, and thereafter turn it back on if in any doubt, consult a qualified professional.
Do not pull on the power cord or the appliance itself to unplug the appliance from the plug point.
Do not pull on the power cord to move the appliance.
Do not use the appliance if it does not work properly or if it appears damaged; when in doubt, contact a qualified technician.
Ensure the heating element is free of dust, lint, or any similar material: this improves the fan heater’s performance and prevents overheating. Periodically check that the aspiration grille does not become obstructed by objects, fabrics or other materials to prevent overheating or breaking the appliance.

INSTALLATION

After unpacking, check that all parts of the appliance are present; if in doubt, do not use and contact a qualified technician. The packaging materials (plastic bags, polystyrene, metal staples, etc.) must not be left within reach of children, as they are potentially hazardous.
All packaging elements must be disposed of according to their raw material (see the symbol stamped on each one) and according to the provisions of their municipality. The secondary elements of the packaging with low weight (es: packing tape) are unmarked as are its small size packing materials, the protective film of surfaces: therefore you have to follow the procedures for the disposal in force in your municipality.
Before connecting the appliance, check that the voltage on the data plate matches that of the electric system. In the event of incompatibility between the plug point and the appliance’s plug, have the plug replaced with a suitable model by a qualified professional, who should ensure that the cord is suitable for the power rating of the appliance (10A). Check that other appliances with high absorption are not connected to the power line to avoid overloading and fire hazards. The use of adaptors or extensions is generally not advisable; if it is necessary to use them, they must comply with safety regulations and the total current (amps) must not be rated lower than the maximum current of the appliance.
Before each use, check that the appliance is in good condition and that the power cord is not damaged: if in doubt consult a qualified professional.
Ensure that the power cord is correctly positioned and does not come into contact with hot parts or sharp edges, or become wound around the appliance itself and is not twisted.
Do not hang or even lean the appliance against any walls.
Place the fan heater far from any other source of heat, from flammable material (curtains, tapestries, etc.), from flammable gases or explosive objects (spray cans), and from materials that can be deformed by heat. Make sure there is 120 cm of free space in front of the fan heater and 50cm free space on both sides and behind it.
The surface where the appliance is used must be stable, spacious (do not use on shelves), level (since the appliance could tip over), and heat resistant.

Use

The fan heater is equipped with electronic controls for regulation and programming: A panel with a touch keyboard, remote control, and through a Smartphone APP.

Control panel. The panel is on the top of the fan heater, it has a touch keyboard, a display and backlit symbols that show each operation in use. Below there’s the list of functions:

|

O/I switch. It’s the back part, it switches on (pos. I) or switches off (pos. 0) the appliance.

---|---
|

Standby/OFF

The key (ON) switch on the appliance or puts it in standby.

-Note: the last selected mode is activated

| Heating Mode

When “ON”, the key selects the following modes one after the other: Hi -> Low -> Eco. HI=2000W= very hot air

LO=1000W= hot air

“ECO“: depending on the difference between the set and room temperatures (∆T), the program activates the HI (2000W) or LO (1000W) power or the fan only. When the temperature set is: (∆T) > 4°C degrees from the room temperature, the HI function is activated; 4°C > (∆T) > 2°C degrees from the room temperature, the LO function is activated; (∆T) < 4°C degrees from the room temperature, the fan function is activated. Once the required temperature has been reached, ventilation only continues for a few seconds and then switches off.

Furthermore, if the key is pressed for 3 seconds, the Right-Left automatic swing is activated and/or deactivated.

| Temperature and Time Setting. Key diminishes key increases. With the convection heater switched on, adjust the room temperature (5 – 45°C) with the two keys, and once the value is reached the thermostat will interrupt the heating. When the temperature decreases, the thermostat will turn the resistance back on for the time necessary to restore the value.
| Timer. In the “ON ” state, the key activates the Timer and its “Countdown”. Once it expires the convection heater will go into Standby. The time can be adjusted from 1h to 24h using the keys . To reset the Timer, press the button for about 3

seconds to put it in standby.

NOTE. The timer is subject to programming (daily/weekly) carried out via the APP: if this is in progress, suspend it for the period in which the timer will be active.

| Wi-Fi Key

Once the Wi-Fi configuration has been performed (see below), the functions of the convection heater and the weekly programming can be controlled with the smartphone and the “Bimar Live Smart” APP.

The key activates the Reset of the Wi-Fi configuration.

Some functions are manageable with the Alexa and Google Assistant voice control.

Control panel

The appliance is equipped also these functions:

Auto Dim. It darkens the display if you don’t perform any operation within 1 minute of switching it on: touching any key turns the display back on.
Anti-tip switch. In the event of tipping over, it deactivates the device.
Acoustic warning: an acoustic signal is emitted for each key selection

Remote
In addition to the control panel, the convection heater is equipped with a remote control for controlling the functions described on the side: it must be pointed (upper side) towards the control panel, within a 4m distance making a 20 degrees angle.
The remote control is powered only by (one) CR2025 button coin cell battery, which is not supplied. To enter it follow the procedures and warnings described here:

ON/Standby
Heating Mode
Decrease the Temperature
Increase the Temperature
Auto OFF Timer
Oscillation
Press the lock button and hold it down to take out the battery holder.
Replace the battery with one of the same type, making sure the (+) polarity is facing up.
Push the battery holder in, until it’s locked in place securely.

WARNING : Do Not Ingest Battery. Chemical Burn Hazard.
This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. The batteries contain materials, which are hazardous to the environment; they must be removed from the appliance before it is scrapped and that they are disposed of safely.

Smartphone.
In addition to the control via the control panel and the remote control, the convection heater can be controlled via smartphone.

Description
Wifi Fan heater, usable via Smartphone via application with Android or iOS operating systems.

Adjustable selections via the Bimar Live Smart APP.
The APP installation and configuration procedure may be slightly different from what is described in this manual; proceed as indicated in the APP.
We are not responsible for problems caused by the internet line, the Wi-Fi router and other smart devices.
Check that the router is for domestic use, that the WiFi network has no access restrictions other than the password, and the presence of a strong and uniform WiFi signal in the room where the appliance is to be installed and used. In general, routers have set up dual-band, i.e. based on dual-frequency (2.4 and 5)GHz. To activate and configure the device, you only need to set the fixed frequency at 2.4GHz (access the IP address of the router and search for the network settings section (image on the side, refer to it as an example; if in doubt, contact professionally qualified personnel). For subsequent uses of the device, if desired, reset the router to dual frequency.
Make sure that the smartphone is connected to the wi-fi network to be used for the appliance.

First Installation/Setup

Install the “BIMAR life Smart” App via Google Play (Android) or AppStore (iOS), or scan the QR code provided here
Once installed, the app icon appears.
Click the “Bimar Live Smart” icon to run the app.

At the first access, register and fill in your credentials:

click on “Create a new account”, and confirm “I agree” for the data relating to the Privacy Policy (by pressing: ” ” the text of the informative report under Article 13 of the 2016/679 European Regulation appears, while by selecting “User Agreement” the Bimar srl Service Agreement appears)
if you want also click on: “I consent to the processing of my data for receiving commercial and marketing communications”
enter your email address (select the desired country)
click on the writing “Get the verification code”, wait for a few seconds, and then enter the code received in the “Verification code” part using your registration email address (possibly also check the Junk e-mail folder, if you don’t receive it in the inbox folder).
Enter your personalized password and click “Done”.
If the procedure is carried out correctly, the control panel screen for using the application appears.

Configuration via Bluetooth (activate the phone’s Bluetooth connection)

Insert the plug into the socket, and press the 0/I switch to pos. I (a “Beep” acoustic signal will be heard, with the display will light on and flash light symbol).
Press the “ ” button for active the appliance.
Press the “ ” button for about five seconds: a “Beep” acoustic signal will be heard and “ ”symbol on the display will flash quickly; release the button.
Open the APP on your smartphone: on the first screen click on “ADD DEVICE” or optionally click on “ ” at the top right and press the writing: “ “.
Wait for the device to load, then click on the word “Add”
On the next screen: click on
“Wi-Fi set-up”: enter: NAME and PASSWORD of your Wi-Fi network, and click on the “Next” symbol to activate the connection.
Wait for the device to connect to the Wi-Fi network and press the word “Finish

Configuration without Bluetooth

Follow the procedure in the previous paragraph 2.1. to turn on and reset the device.
Open the APP on your smartphone: on the first screen click on “ADD DEVICE” or optionally click on “ ” at the top right and press the writing: “ “.
In the next screen, click “ ”.
“Set up Wi-Fi”: enter: NAME and PASSWORD your Wi-Fi network, and click on the “next” symbol to activate the connection.
On the next screen: click on the writing “Confirm” to activate, then the LED will flash quickly; after this press on the “Next” symbol.
The countdown will start: Scanning devices ⇒ Register the device on Cloud ⇒ Start the device that stops when the connection between your device and the smartphone has occurred ⇒ End.
It’s also possible to pair the device via the “AP Mode”, press the button at the top right, and hold down the “ ” button, and you will hear a “Bip” acoustic signal and will flash , open the WI-FI phone settings and connect to the “Bimar” network Live Smart xxx” or “Smart Life xxx” and then press “connect now”.
If the operations described above do not proceed correctly or the device is “Offline”, the device must be reset, operating as follows: remove the plug from the socket, and leave the fan heater disconnected for 30 seconds. Re-insert the plug into the socket of the fan heater, and press the main switch to pos. I, and the “ ” button. Press the “ ” button for about five seconds: a “Beep” acoustic signal will be heard and “ ” symbol on the display will flash quickly; release the button.

Settings and customizations

Open the smartphone screen and press in the bottom right corner to customize the following functions: Home management, Message Center, Assistance Center, Configure, and In-APP purchases.
Press in the bottom center to customize the operation of the device to suit the various scenarios or operating situations provided by the APP (for example: Back home, Leaving home, Dawn, Goodnight, Temperature, Humidity, Weather, Air quality, Dawn/dusk) or in combination with other devices.
Press in the bottom left corner and then in the top of the screen, for example: to customize (update and/or change where permitted) the appliance’s position or the outdoor wind speed, air pressure, humidity and temperature (see right).
Press top right to customize the following: Change Device name and device position, Check Network, Third-party devices supported: Amazon Alexa, Google Assistant, Device sharing, Create a Comment group, Device Info, Feedback, Update Firmware, Remove device, Reset to factory settings. The smartphone must be connected to Wi-Fi or a cellular data network for remote control.

Voice control
The device is compatible with Amazon Alexa and Google Assistant voice controls. Open the corresponding App/connect the Skill (make sure that the account and password used are the same as those of the “Bimar Live Smart” app) and follow the settings.
Google Home: some basic vocal commands are:

“OK Google” or “Hey Google”, turn on XX (name of the device)
“OK Google” or “Hey Google”, turn off XX (name of the device)
etc.

Amazon Alexa: some basic vocal commands are:

“Alexa”, turn on XX (name of the device)
“Alexa”, turn off XX (name of the device)
etc.
Note : the voice control has defined functions.

First use: run the appliance to eliminate the “new smell” and any oil residue from the manufacturing process for at least 10/15 minutes: insert the plug inside the socket, pos. mode HI and adjust the thermostat at 30°C. During this operation, ventilate the room well to eliminate the “new smell” that is given off by the appliance.
Follow these steps to use the appliance correctly:

Before inserting the plug into the power socket, check that the main switch to pos. “0”.
Insert the plug into the power socket
Press the main switch to pos. “I”, press the switch “ ” to activate the heater and select the required functions.
Weekly programming: (only activated via Smartphone): sets: the on/off periods for each day of the week and the temperature required. Programming may be: timer ON, timer OFF or timer ON/OFF, in which the on-off periods are set for just once or for every day of the week, mode, and the temperature is selected. Save.
Press the switches to: “ ” and the main switch to“0” position to turn off the appliance, and remove the plug from the power socket.

At each use, check that the air intake and dissipation grilles cannot become blocked; furthermore, to avoid the risk of fire or overheating of the appliance, do not cover it or use it to dry laundry. Never leave the appliance connected to the socket if it is not in use, especially for long periods. In the event of a breakdown or malfunction, switch off the appliance and have it checked by professionally qualified personnel; repairs carried out by unqualified personnel can be dangerous and void the guarantee

CLEANING AND MAINTENANCE

Warning : before cleaning the appliance, turn it off, remove the plug from the plug point, and wait until it cools down.

To ensure proper operation of the appliance, periodically check that the rear ventilation grille is not blocked by fluff or threads: this should be done after removing the plug from the mains; If necessary, use a vacuum cleaner, taking care not to damage the element.
To clean the main outer casing using a soft, damp cloth; do not use steel wool or abrasive products.
If the fan heater is not used for a long period, cover it and store it in a dry place; it is advisable to place it in the original packaging to protect it from dust and moisture.
Do not immerse the appliance in water or another liquid. Do not wash it with running water or in the dishwasher.
If you decide to no longer use the appliance, it is recommended that it is made inoperative by cutting the power cord (first ensure that the appliance has been unplugged from the power supply), and ensure that any parts that could represent a risk to playing children are put away.

BATTERY – Remove the battery from the remote control before its disposal. Do not dispose of the battery with domestic waste. The battery must be disposed of in the appropriate containers or in the specific collecting center. Suitable segregated collection helps prevent damage to the environment and to human health.
To remove the battery, refer to the Instructions for use.

Correctly disposing of the product as per European Directive 2011/65/UE.
At the end of its lifespan, the product must not be disposed of as part of ordinary waste. It can be handed in to specific collection points set up by the local authority, or to retailers who provide such a service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and human health resulting from inappropriate disposal and allows to recovery of the materials from which it is made to obtain significant savings in energy and resources. As a reminder of the obligation to dispose of appliances separately, the product is marked with a crossed-out wheelie bin symbol. Incorrect disposal of the product by the user will lead to sanctions according to current law.

Via G.Amendola, 16/18 25019 Sirmione (BS) – ITALY
www.bimaritaly.it