FOCAL IW T3Y 200 2 Woofer Kit User Manual

: June 15, 2024
: FOCAL

Table of Contents

FOCAL IW T3Y 200 2 Woofer Kit
Product Usage Instructions
What’s in the box
Installation Instructions
Specifications
IMPORTANT SAFETY INSTRUCTIONS
SPECIAL PRECAUTIONS AND MIANTENANCE
Warranty terms and conditions
Product sheet
Technical Sheet
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FOCAL IW T3Y 200 2 Woofer Kit

Product Usage Instructions

Product Positioning:

The loudspeakers in the range have been designed to deliver the most faithful sound reproduction for any style of music. To optimize their performance and guarantee good tonal balance and a realistic sound image, please follow these guidelines:

Place the speaker drivers from the kit in the dedicated OEM locations (refer to fig. 1 and 2).

Assembly Instructions:

For your safety, please follow the assembly instructions provided in this user manual.

Warranty Registration:

To facilitate the Focal-JMlab warranty, it is now possible to register your product online at: www.focal.com/garantie.

Product Usage Recommendations:

Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence, and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure, and true. To get the most out of your product, we recommend that you read the instructions in this booklet and store it in a safe place for future reference.

Frequently Asked Questions:

Q: What is the maximum power of the T3Y product?
- A: The maximum power of the T3Y product is not specified in the user manual.
Q: How should I position the speaker drivers from the kit?
- A: We recommend placing the speaker drivers from the kit in the dedicated OEM locations as shown in figure 1 and 2.
Q: Where can I register my product for warranty?
- A: You can register your product for warranty online at www.focal.com/garantie.

What’s in the box

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig1

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig2 FOCAL-IW-
T3Y-200-2-Woofer-Kit-fig3

Installation Instructions

IS T3Y 100

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig8 FOCAL-IW-
T3Y-200-2-Woofer-Kit-fig9

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig10

| FIG. A| FIG. B| FIG. C
---|---|---|---
Midrange| ×| ×| ×
Tweeter| ×| ×| ×
T1| ×| ×|
Filter| ×| ×| ×
T2| ×| |

Specifications

IW T3Y 200

Type/ 2 woofers kit
Max. power/150W
Nom. power /75W RMS
Sensitivity(2.83V/1m)/91dB
Frequency response/ 40Hz – 1,500 Hz
Impedance/4Ω
Woofer// 8″ (200mm)
Depth 11/4″ (31mm)
Cone/Flax®
Voice coil diameter/11/2″ (38mm)
Motor/Neodymium
Surround/Butyl

ICC T3Y 100

Type/Central speaker kit
Max. power/100W
Nom. power/50W RMS
Sensitivity (2.83V/1m)/87dB
Frequency response/150Hz – 20kHz
Impedance/4Ω
Midrange/4″ (100mm)
Tweeter/Aluminium inverted dome
Depth/13/8″ (33.8mm)
Cone/Flax®
Voice coil diameter/1″ (25mm)
Motor/Neodymium
Surround/Butyl
Crossover/Integrated

IC T3Y 100

Type/2-way coaxial kit
Max. power/80W
Nom. power /40W RMS
Sensitivity (2.83V/1m)/88dB
Frequency response/150Hz-20kHz
Impedance/4Ω
Midrange/4″(100mm)
Tweeter/Aluminium inverted dome
Depth /13/8″ (33.8mm)
Cone /Flax®
Voice coil diameter/1″ (25mm)
Motor/Neodymium
Surround/Butyl
Crossover/Integrated

| IS T3Y 100
---|---
Type| 2-way component kit
Max. power| 100W
Nom. power| 50W RMS
Sensitivity (2.83V/1m)| 87dB
Frequency response| 150Hz – 20kHz
Impedance| 4Ω
Midrange| 4″ (100mm)
Tweeter| Aluminium inverted dome
Depth| 13/8″ (33.8mm)
Cone| Flax®
Voice coil diameter| 1″ (25mm)
Motor| Neodymium
Surround| Butyl
Crossover| Integrated

IMPORTANT SAFETY INSTRUCTIONS

| Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned and relating to the handling, operation and maintenance of the device.
---|---
1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all the instructions.

5. Do not use this device near water.

6. After unpacking the product, make sure the packaging is kept out of the reach of children. It poses a suffocation risk.

7. Never use chemical products or abrasive detergents to clean the device. Clean with a dry cloth only.

8. Do not obstruct ventilation openings, as this may alter the sound quality of the device.

9. Do not install or store the device in the engine compartment or near a heat source.

10. During storage, the device should not be exposed to temperatures below

-20°C or above 80°C. The operating temperature range for the device is between -10°C and 50°C.

11. Ensure you leave a 5cm space around the device to allow heat exchange.

12. Never place or leave metal objects, such as coins or metal tools, in the device as they could damage the speaker.

13. If the product emits smoke or an unusual smell, immediately turn off the power supply (turn off the ignition and remove the key) and stop using it.

Contact your retailer as soon as possible.

14. Do turn on any function likely to distract you when driving. Any actions or adjustments that require more in-depth attention must only be made when the vehicle is at a complete stop. There is a risk of accident.

| 15. Do not listen to the loudspeakers at a high volume, so that you can hear external noise when driving.

16. Only use accessories recommended by the manufacturer.

17. If cords or connectors are supplied, use them properly as described in the user manual without substituting them or modifying them.

18. If the kit or connector includes a fuse, it must only be replaced by a fuse of the same rating.

19. Do not pinch or damage the device or vehicle electric cables.

20. All maintenance tasks should be performed by a qualified professional. Maintenance is required in case of any kind of damage to the device (damaged cable or plug, spillages or objects inserted into the device, exposure to rain or humidity, if the device malfunctions or overturns, etc.).

21. After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is working safely.

22. When replacement components are needed, make sure that the maintenance technician uses the components recommended by the manufacturer

or components with exactly the same technical features as the original product. Using non-compliant components could cause fires, electric shocks or other risks.

| 23. If a subwoofer is installed in the vehicle, it is essential to secure it by attaching it solidly. We recommend to attach the enclosure to the floor or chassis of the vehicle for safety. If it is

not properly secured, it could become a projectile in the event of an accident. This is even more important if the subwoofer is installed in a hatchback, a station wagon, a utility vehicle or a van.

24. Some users who are not self- sufficient enough to use the product on their own without danger. In particular, children under 14 or people with some types of disabilities must be supervised and/or accompanied when using the device.

25. To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive

volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing.

To facilitate the Focal-JMlab warranty, it is now possible to register your product online at : www.focal.com/garantie

Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.

For your safety, follow the assembly instructions provided in this user manual.

Equipment required

Drill (10mm drill bit);
Hex screwdriver;
Torx screwdriver;
Ultra-flat key with torx bit (total height 1 cm);
Plastic door trim removal

Important recommendations

These speaker drivers have been designed to be fitted in the factory location. Check that there is sufficient space between the speaker driver and the protective grille.

Keep the speaker drivers clear of any metal shavings and dust particles during the cutting
Clean thoroughly before fitting the speaker
Ensure that there are no objects positioned across the grille, as this could damage the speaker
For the electrical disconnection, use the Do not pull on the wires.
Unclipping and reclipping the various parts must be done
Excessive force may damage them.

Product positioning

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig5 FOCAL-IW-
T3Y-200-2-Woofer-Kit-fig6

FOCAL-IW-T3Y-200-2-Woofer-Kit-fig7

The loudspeakers in the range have been designed to deliver the most faithful sound reproduction for any style of music. Nonetheless, a few simple rules should be followed to optimise their performance and to guarantee good tonal balance and a realistic sound image. We recommend placing the speaker drivers from the kit in the dedicated OEM locations (fig. 1 and 2).

Installation
The wiring method for the speakers in the IS T3Y 100 kit depends on the configuration of your car (see tab.).

V1: No tweeter connection in the car (fig. A)
V2: Tweeter not activated, Tweeter connector in footwell(fig. B)
V3: Wired tweeter (fig. C)
Identify the location of your midranges, as well as your tweeters, in the case of a 2-way component kit.
Carefully disconnect and disassemble the original speakers.
Fit the Focal speakers into the vehicle’s factory locations, then connect them.

Installation

details may vary depending on the model (see tab.). We recommend watching our online assembly tutorials.
To improve the performance of your system and eliminate parasitic sounds, we advise you to use the “B.A.M.” acoustic insulation kit sold by Focal.

SPECIAL PRECAUTIONS AND MIANTENANCE

Door trims Once the door trim has been removed, it must not be placed on the floor. It must be placed on a raised surface to avoid damaging it or damaging the cables.

Dashboard

When fitting the screw receivers, be careful not to drop the screws. This does not pose any particular risk, but it will be difficult to find them again. If you need replacement screws, these are self-tapping screws 5mm in diameter and 15mm long (M5x15).

For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the technical specifications of its products without prior notice. Where required, any images shown are for illustrative purposes only, and may differ slightly from the products sold.

Footwell

Be careful not to touch any wiring other than that required. The crossover must be kept in the footwell only. When reassembling the footwell, make sure to replace the trim correctly so that it covers the seal.

Maintenance

To care for the IW T3Y 200, ICC T3Y 100, IS T3Y 100 and IC T3Y 100 speaker drivers, simply dust using a dry cloth. If the grille is marked, use a damp duster. Never use solvents, detergents, alcohol or corrosive products, scrapers or scouring utensils to clean the surface of the speaker drivers.

Running-in period

The IW T3Y 200, ICC T3Y 100, IS T3Y 100 and IC T3Y 100 speaker drivers used are complex mechanical components that require a running-in period to operate at their best. This running-in period varies depending on the conditions in question and may take several weeks. To reduce this time, operate the speaker drivers for about 20 hours at a moderate volume. Once the speaker drivers’ characteristics have fully stabilised, you will be able to enjoy the performance of your products to the full.

Warranty terms and conditions

All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor in your country. Your distributor can provide all details concerning the conditions of warranty. Warranty cover extends at least to that granted by the legal warranty in force in the country where the original purchase invoice was issued.

Check Online Updated Compatibility list and installation manual.

www.focal-inside.com

To set up your Focal Inside product, please watch online the installation video.

www.focal.com/focal-inside/videos/

Product sheet

IW T3Y 200

Woofers IW T3Y 200 have been designed for drivers who want to replace their factory audio system with a high-quality solution by Focal that is fully compatible with the relevant Tesla models. Equipped with the Flax® cone, an exclusive Focal technology, they significantly improve the in-car listening experience. Designed and manufactured in France, the Tesla-compatible Focal Inside range allows an à la carte/personalised audio system configuration.

Key points