ACASIS EC-7352 3.5 Inch Dual Disk Hard Disk Array Box User Manual
- June 17, 2024
- ACASIS
Table of Contents
ACASIS EC-7352 3.5 Inch Dual Disk Hard Disk Array Box
Foreword
Dear user, thank you for purchasing Acasis product. In order for you to have a
better understanding of the product, please read this manual carefully before
use. I wish you a pleasant experience!
Package Contents
- 3.5-inch dual-bay hard disk array*1
- 12V/3A power adapter*1
- USB data cable*1
- Installation screw package*1
- User manual (including warranty card)*1
- Install screwdriver*1
Precautions
- All data will be deleted when setting RAID modes, please backup your data first!
- Disconnect the device only after unmounting the hard disk drive from the computer safely, incorrect using may cause damage and permanent loss of data.
- ACASIS is not responsible for any damage to the hard disk drive or data loss caused by improper use.
Functional Interface
| ①Hard disk indicator*2 | ⑥DIP button |
|---|---|
| ②Screw fixing port*2 | ⑦Power interface |
| ③Portable Carrier | ⑧Computer interface |
| ④HDD 2 interface | ⑨Switch button |
| ⑤HDD 1 interface | ⑩Power Indicator |
RAID Setting
Before setting RAID mode, please turn off the power switch of the
enclosure.
Kind tips
- Please install HDD1 and HDD2 hard disks correctly;
- According to the needs of users, adjust the correct dialing method;
- When using the product, it must be connected to the power supply before it can be used.
Notice
All data will be deleted when setting RAID modes, please backup your data
first!
- After setting RAID mode, please get into Storage Disk Management to initialize and format the drive, then all data of two drives will be deleted, please backup your data first.
- This product is compatible with 3.5-inch SATA hard drives and SSD with standard SATA interface. If you use a 2.5-inchhard drive, an additional adapter rack is required.
- A single disk supports a maximum of 18TB.
- When using a brand new hard disk,it must be initialized and formatted to be recognizable.
- After setting up RAID mode, the hard disk must be formatted to be recognizable.
- The disassembled hard disk may cause path conflict, and you need to reassign the access path to identify it.
- Resetting RAID mode will cause the data to be cleared.
Product Features
- USB 3.0 port with up to 5Gbps transfer speed
- Support Dual SATA 3.5″ HDD(2.5” hard disk needs to be equipped with an adapter bracket, not included)
- Support Mode Raid 0/Raid 1/SPAN/JBOD
- Support HDD Capacity up to 2 x 18TB
- High-quality aluminum for optimal heat dissipation and structural integrity
- Built-in 50mm fan for additional cooling power
- LED light indicates Power and Activity status
- Hot-swappable, plug and play, no drivers needed
- System Requirements: Windows / Mac Os / Linux
- Size:20012065mm
Product Warranty
The warranty period is 12 months from the date of purchase.
Limitation of Liability
In order to ensure the safety of your data, we recommend that you make regular
data backup. The company does not assume any responsibility for data loss
caused by any factor and does not assume any compensation and data recovery
obligations. If you start to use this product, it means that you have
understood and accepted the contents of this manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>