Hantek PP-80 Oscilloscope Probe Kit Instructions

Hantek PP-80 Oscilloscope Probe Kit

Product Specifications

Electrical Characteristics

PP-150: X1, X10
PP-200: X1, X10
Input Capacity| X1: 85pF – 115pF
X10: 18.5pF – 22.5pF
Oscilloscope Input Capacity: 15pF – 40pF
Bandwidth| X1: DC – 6MHz
X10: DC – 60MHz, 100MHz, 200MHz
Max Input Voltage| X1: 200V DC + Peak AC
X10: 600V DC + Peak AC

Physical Characteristics

Standard Accessories

• Probe Tip – 1pc
• Ground Lead – 1pc
• Marker Ring – 2pcs
• Tip Locating Sleeve – 1pc
• Adjustment Tool – 1pc

Note : Content of this document is subject to change without notice.

Product Usage Instructions

Calibration and Usage
The HanTek PP-80/PP-150/PP-200 probe is designed for use on instruments with specific input impedance and capacitance requirements. Follow the steps below for calibration and usage:

Calibration:

1. Ensure the instrument has an input impedance of 1M paralleled by 20pF.
2. If needed, recalibrate for instruments with input capacitance of 15 to 40pF.

Switch Position:
The probe features a two-position slide switch (1X, 10X) for adjusting the compensating network.

Cable Length:
The cable length of the probe is 1.2 meters, providing flexibility in measurement setups.

Usage:

1. Select the appropriate attenuation (X1 or X10) based on the measurement requirements.
2. Connect the probe to the instrument ensuring a secure and proper connection.
3. Adjust the compensating network switch as needed for accurate measurements.

Frequently Asked Questions (FAQ)

• Q: Can the probe be used with instruments that have different input capacitance requirements?
  A: Yes, the probe can be recalibrated for use with instruments having an input capacitance of 15 to 40pF.

• Q: What is the maximum input voltage supported by the probe?
  A: The probe supports a maximum input voltage of 200V DC + Peak AC for X1 attenuation and 600V DC + Peak AC for X10 attenuation.

• Q: Are there any accessories included with the probe?
  A: Yes, the standard accessories provided with the probe include a probe tip, ground lead, marker rings, tip locating sleeve, and adjustment tool.

Oscilloscope Probe Kit
HanTek PP-80/PP-150 /PP-200

Made in China

Oscilloscope Probe Kit

• The HanTek PP-80,PP-150,PP-200 probe is a passive. low-impedance attenuation probe.
• The probe has been designed and calibrated for use on instruments having an input impedance of 1MΩ paralleled by 20pF.
• However, it may be recalibrated for use on instruments having an input capacitance of15 to 40pF.
• The probe incorporates a two position (1X, 10X) slide switch in the compensating network and cable length of 1.2 meters.
• The specification is as follows.

Table 1 ELECTRICAL CHARACTERISTICS

Temperature -15℃ to 70℃

| PP-80| PP-150| PP-200
---|---|---|---
Characteristic| Performance Requirements
Attenuation| X1                      X10
Input Capacity| X1:85pF~115pF X10:18.5pF~22.5pF
Oscilloscope Input capacity| 15pF~40pF
Input Resistance| X1:1MΩ±2%         X10:10MΩ±2%
Band width| X1:DC-6MHz X10:DC-60MHz/100MHz/200MHz
Max input Voltage| X1: 200V DC+Peak AC X10: 600V DC+Peak AC

Table 2 PHYSICAL CHARACTERISTICS

Standard Accessories

1. Probe Tip ……………………1pcs
2. Ground Lead ……………….1pcs
3. Marker Ring …………………2pcs
4. TipLocatingSleeve……………..1pcs
5. Adjustment Tool ……………..1pcs

Note:
Content of this document are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>