HIKVISION DS-KAD7060EY 2 Wire HD Distributor User Guide
- June 17, 2024
- Hikvision
Table of Contents
- HIKVISION DS-KAD7060EY 2 Wire HD Distributor
- Product Usage Instructions
- Appearance and Interface
- DS-KAD7061EY Distributor
- DS-KAD7060EY-S Distributor
- About this Document
- About this Product
- Acknowledgment of Intellectual Property Rights
- LEGAL DISCLAIMER
- System Wiring
- Wiring
- Installation
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HIKVISION DS-KAD7060EY 2 Wire HD Distributor
Specifications
- Device Name: DS-KAD7060EY Distributor
- Power Supply: Indoor stations and distributors of Hikvision
- Compatibility: DS-KH7300EY-TE2/DS-KH7300EY-WTE2 indoor stations, DS-KD7003EY-IME2 door station, and DS-KAD7061EY distributor
- Maximum Capacity: 22 indoor stations with Wi-Fi function or 64 without Wi-Fi function in one building
- Maximum Cascading: Up to 16 distributors (DS-KAD7061EY)
Product Usage Instructions
Installation
Before you begin
- Ensure the device is in good condition.
- Power off all related equipment during installation.
- Check the product specification for the installation environment.
Wall Mounting Steps
- Fix the DIN rail onto the wall using a matched DIN rail.
- Press the red clip upward and lock it to the DIN rail.
Wiring
DS-KAD7061EY Distributor
- Each DS-KAD7061EY distributor can wire up to 4 indoor stations.
Cable Type Description:
- DS-KAD7061EY to Main Indoor Station
- DS-KAD7061EY to DS-KAD7060EY Distributor or Power Module/DS-KAD7060EY-S
- DS-KAD7060EY Distributor to Door Station
- Door Station to Lock (Power Supply)
Appearance and Interface
DS-KAD7060EY Distributor
Supply power and network for cascaded devices (door station, indoor station,
and DS-KAD7061EY distributor).
Chain connecting among different DS-KAD7060EY distributors.
DS-KAD7061EY Distributor
Distribute network for connecting more indoor stations.
DS-KAD7060EY-S Distributor
Supply only network for cascaded devices (DS-KAD7060EY distributor only). Connect multiple DS-KAD7060EY distributors.
The DS-KAD7060EY distributor supplys power to indoor stations and distributors of Hikvision, which should be used with DS-KH7300EY-TE2/DS-KH7300EY-WTE2 indoor stations, DS-KD7003EY-IME2 door station and DS-KAD7061EY distributor.
About this Document
This Document includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only.
- The information contained in the Document is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of the Document at the Hikvision website (https://www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as “Hikvision”) makes no warranties, express or implied.
- Please use the Document with the guidance and assistance of professionals trained in supporting the Product.
About this Product
This product can only enjoy the after-sales service support in the country or region where the purchase is made.
Acknowledgment of Intellectual Property Rights
-
Hikvision owns the copyrights and/or patents related to the technology embodied in the Products described in this Document, which may include licenses obtained from
third parties. -
Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this Document may be excerpted, copied, translated, or modified in whole
or in part by any means without written permission. -
HIK VISIONand other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
-
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
-
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU OWN RISK. IN NO EVENT WILL HI VISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. -
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
-
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
-
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
System Wiring
Wiring
Tips for Cables and Wiring
Cables and Wiring
-
When there are multiple cores in one parallel line, only one pair of closed cores are allowed to transmit signal. It is not allowed to use multiple pair of cores in one cable to transmit signal.
-
When using parallel lines, it is suggested to use those with shielding layer. If dual core or multiple core parallel lines without shielding layer are routed, stability of signal transmission can be effected.
You need to run a test before installation. -
Impedance of cable should not be over suggested value, or distributor cannot transmit enough power to indoor station or door station.
-
Strong electricity and weak electricity cannot be wired in the same route, they need to be wired separately and the distance should be more than 0.5 meter.
-
All the cables used need to follow the restriction in the following table.
Device Wiring
- Installation environment (temperature, moisture etc.) needs to follow requirements in specification or power output can be effected.
- Power consumption of each modular door station (main module and sub modules) should be less than 15 W. Please reach local technical support if you are not sure about power consumption of each module. Door station should be connected to CH1 and CH2 of the video/audio distributor.
- Indoor station should be connected to CH3 to CH6 of the video/audio distributor
Installation
Before you begin
- Make sure the device in the package is in good condition.
- Make sure all the related equipment is power-off during the installation.
- Check the product specification for the installation environment.
Wall Mounting Steps
-
Fix the DIN rail onto the wall.
You are required to utilize a matched DIN rail. -
Press the red clip upward, and lock it to the DIN rail.
If a power adapter is provided in the device package, use the provided adapter only. If no power adapter is provided, ensure the power adapter or other power supply complies with Limited Power Source. Refer to the product label for the power supply output parameters.
FAQ
Q: What is the maximum capacity of indoor stations supported by the DS- KAD7060EY distributor?
A: The DS-KAD7060EY distributor can support up to 22 indoor stations with Wi- Fi function or 64 without Wi-Fi function in one building.
Q: How many distributors can be cascaded with the DS-KAD7061EY distributor?
A: Up to 16 distributors (DS-KAD7061EY) can be cascaded with the DS-KAD7061EY distributor.
References
- Hikvision USA - Leading the future of AIoT
- Hikvision IP cameras | Hikvision CCTV Security cameras from UK Supplier
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>