D-Link DUB-E100 USB 2.0 TO Fast Ethernet Network Adapter Installation Guide
- June 4, 2024
- D-Link
Table of Contents
D-Link DUB-E100 USB 2.0 TO Fast Ethernet Network Adapter Installation Guide
CONTENTS OF PACKAGING
USB 2.0 TO FAST ETHERNET NETWORK ADAPTER
DUB-E100
If any of these items are missing from your packaging, please contact your
reseller.
SYSTEM REQUIREMENTS
- Computer with Microsoft Windows® 7/8.x/10, Mac OS 10.6 to 10.14, Linux
- Available USB port
PRODUCT SETUP
-
Step 1:
Plug the DUB-E100’s USB cable into an available USB port on your computer. -
Step 2:
Run the setup file in the opened folder to begin the DUB-E100 driver installation. -
Step 3:
Attach an Ethernet cable to the Ethernet port on the DUB-E100 and to your network switch, hub or router.
Installation complete
When the installation of the DUB-E100 is complete, the 100M LED will be solid green when the DUB-E100 is connected to a 100 Mbps network. The ACT LED indicates when data is being transmitted or received by flashing green. If both LEDs are unlit, there may be a problem with the physical connection. Check the cables between your DUB-E100, the computer, and the network. Verify that your network switch, hub, or router is powered on.
ACT LED
Flashes green when data is being transmitted or received
100M LED
Lights up solid green when the network connection is at 100 Mbps.
Power LED
Lights up solid green when the network adapter is connected to a USB port.
Support
Moldova
Chisinau; str.C.Negruzzi-8
Tel: +373 (22) 80-81-07
E-mail: info@dlink.md
Россия
Москва, Графский переулок, 14
Тел. : +7 (495) 744-00-99
E-mail: mail@dlink.ru
Қазақстан
Алматы, Құрманғазы к-cі,143 үй
Тел.: +7 (727) 378-55-90
E-mail: almaty@dlink.ru
Türkiye
Uphill Towers Residence A/99
Ataşehir /ISTANBUL
Tel: +90 (216) 492-99-99
Email: info.tr@dlink.com.tr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>