dji Mic 2 Compact Digital Wireless Microphone User Guide
- June 17, 2024
- DJi
Table of Contents
dji Mic 2 Compact Digital Wireless Microphone
Product Specifications:
- Model: DJI Osmo Pocket 3
- Version: v1.0
- Intelligent Noise Cancelling
- Connectivity: TX, RX, 3.5mm TRS IN/OUT
- Power: 2s rechargeable battery
Product Usage Instructions
-
Powering On and Off:
To power on the DJI Osmo Pocket 3, press and hold the power button for 2 seconds. To power off, press and hold the power button again for 2 seconds. -
Connectivity:
Connect the TX (transmitter) and RX (receiver) using the provided cables. For audio input/output, use the 3.5mm TRS ports. -
Intelligent Noise Cancelling:
Activate the intelligent noise cancelling feature to enhance audio quality during recordings. Adjust settings as needed. -
Recording:
To start recording, press the REC button once. Press it again to stop recording. Check the status indicator for recording status.
Frequently Asked Questions (FAQ):
-
Q: How do I link the transmitter and receiver?
A: Press the linking buttons on both the TX and RX simultaneously until they establish a connection. -
Q: Where can I find more information and support?
A: Visit DJI’s official website at https://www.dji.com/mic-2 for downloads and contact DJI SUPPORT for assistance.
Quick Start Guide
INSTALLATION STEPS
WE ARF HERE FOR VOLI
SUBSCRIBE FOR MORE INFO
https://www.dji.com/mic-2/downloads
This content is subject to change without prior notice. copy grade 2023 Of Al Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>