RELIABILT LS-SW-W3012B Wall Bridge Cabinet Owner’s Manual
- June 17, 2024
- RELIABILT
Table of Contents
RELIABILT LS-SW-W3012B Wall Bridge Cabinet
RELIABILT and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
- Thank you for purchasing this RELIABILT product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
- If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-386-7941, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at [email protected].
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
WARNING
- Electric, plumbing, gas lines and other utilities, are frequently installed or embedded behind walls where cabinets are being installed. Before drilling any holes or driving any screws, be sure you will not be contacting any of these utilities. Failure to follow these instructions may result in property damage and serious or fatal injury. If you do not feel confident in your ability to ensure that you will not contact utilities behind a wall during installation, please contact a licensed contractor to install the cabinets.
- This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
CAUTION
- Avoid using cleaners that contain bleach, ammonia, citrus-based products or any type of abrasives (see cleaner label). These cleaners can cause damage to the cabinet finish.
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Please visit Lowes.com for additional assembly resources.
Estimated Assembly Time: 20 – 30 minutes
- 2-person assembly recommended
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information.
CARE AND MAINTENANCE
- A damp cloth is sufficient for normal spills. Dry the surface immediately.
- Most general-purpose household cleaners can be used to clean doors.
- Caustic agents and/or abrasive scrubbers, or oven cleaners, should not be used.
- Liquid on the surface should not be left for long periods.
WARRANTY
- Contact the customer service team at 866-386-7941
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A1 | Box side panel – left | 1 |
| A2 | Box side panel – right | 1 |
| B | Box bottom panel | 1 |
| C | Box back panel | 1 |
| D | Face frame | 1 |
| J | Door panel | 2 |
| L | Box top panel | 1 |
HARDWARE CONTENTS
- Soft-close hinge x 4
- Included/Incluye: 5/8” Flat Head Phillips Screw x 8
- 3/4” Round Head Phillips Screw x 4
- Corner brace x 10
- Included/Incluye: 1/2” Round Head Phillips Screw x 40
- 1″ Flat Head Screw x 6
- Rubber bumper x 4
INSTALLATION OVERVIEW
- Use 1/2” round head phillips screw x 8
- Use 1/2” round head phillips screw x 8
- Insert t he box back panel (C) into the right box side panel (A2) groove.
- Insert t he left box side panel (A1) into the box back panel (C) groove.
- Use 1/2” round head phillips screw x 4
- Insert the box bottom panel (B) and the box top panel (L) into the grooves.
- Use 1/2” round head phillips screw x 4
- Use 1/2” round head phillips screw x 4
- Fasten the box back panel (C) using 1” flat head Phillips screw (GG) x 6.
- Attach the face frame (D) to the cabinet box.
- Secure the face frame (D) using 1/2” round head Phillips screw (EE) x 12.
- Insert the hinge (CC) to the door panel (J) and secure the hinge to door use 5/8” flat head phillips screw x 8 (2 screws for one hinge.
- Locate the pre-drilled holes in the door opening of the face frame and use 3/4” round head phillips screw x 4 (2 screws for 1 door panel) to attach the door panel (J) to the face frame (D).
- If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.
- Attach the rubber bumper (HH) to the top and bottom corner of the door panel (J).
MORE INFORMATION
To see a video of the ass emblyproce ss and to get information on the suggested inst allat ion pr ocess s can here.
SCAN HERE FOR VIDEO ASSEMBLY AND INSTALLATION INSTRUCTIONS.
References
Read User Manual Online (PDF format)
Loading......