Marshall 2AAGF-MOTIFII Wireless In Ear Headphones User Guide

Marshall 2AAGF-MOTIFII Wireless In Ear Headphones

Product Information

• Specifications:
  • Brand: Marshall
  • Model: Bluetooth Earbuds
  • Charging: Wireless or USB
  • LED Indicator: Yes
  • Bluetooth Pairing: Yes

Product Usage Instructions

• Getting Started:
  • Open the charging case.
  • Press and hold the button on the case until the LED turns to a slow blue pulse.
• Touch Controls:
  • To interact with the earbuds, use the touch controls provided. Refer to the user manual for specific touch control functionalities.
• Charging Case:
  • Put your earbuds back in the case and close the lid to turn them off and begin charging. The case can be charged by placing it on a wireless charger or plugging it into a USB power source.
• LED Indicator:
  • The LED indicator provides visual feedback on the status of the earbuds or the charging case. Refer to the user manual for specific LED indicator meanings.
• Bluetooth Pairing Button:
  • To pair the earbuds with a Bluetooth-enabled device, place the earbuds in the case and keep the lid open. Press and hold the Bluetooth pairing button until the front-facing LED turns to a slow blue pulse to set the earbuds in pairing mode.
• FAQ:
  • How do I turn on/off the earbuds?
  • To turn on the earbuds, remove them from the charging case. To turn them off, put them back in the case and close the lid.
  • How do I know when the earbuds are fully charged?
  • The LED indicator will show a specific colour or pattern when the earbuds are fully charged. Refer to the user manual for detailed information on the charging status indicators.

PRODUCT FEATURES

GETTING STARTED

• Open the charging case.
• Press and hold the button on the case until the LED turns to a slow blue pulse.
• Select MOTIF II A N C from your sound device’s Bluetooth® list.
• Download the Marshall Bluetooth app and follow the in-app instructions to complete the setup.

TOUCH CONTROLS

Touch the left or right earbud to control your music, phone calls and more. The long touch behaviour can be customised in the app.

• 1 touch to play/pause or receive/end a call
• 2 touches to skip forward or reject a call
• 3 touches to skip backward
• Long touch to toggle noise cancelling, transparency and ANC off

CHARGING CASE

• Put your earbuds back in the case close the lid to turn them off and begin charging. The case is charged by placing it on a wireless charger or plugging it into a USB power source.

LED INDICATOR

• The LED shows the case battery charge, from red through yellow to green 0–100%(. It pulses blue while in Bluetooth pairing mode.

BLUETOOTH PAIRING BUTTON

• Place the earbuds in the case and keep the lid open. Press and hold the Bluetooth pairing button until the front-facing LED turns to a slow blue pulse to set the earbuds in pairing mode.

IMPORTANT SAFETY INSTRUCTIONS

• Not suitable for children under age three. Contains small parts, which may be a choking hazard.
• Long-term exposure to loud music or sounds may cause hearing loss. To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Electrical products, cables, batteries, packaging, and the manual, should not be mixed with general household waste. For proper recycling, please take these products to a designated collection point where they will be accepted free of charge or return them to your local retailer. Correct product disposal saves resources and prevents negative effects on human health and the environment.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, dispose of defective rechargeable battery at special collection points or return them to your specialist dealer.

WARNINGS

• Set your sound source to low volume before using the headphones.
• Do not use these headphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or others.
• Using these headphones limits your ability to hear noises around you, regardless of listening volume.
• Keep away from fire, water, and high voltage equipment.
• Do not modify, disassemble, open, drop, crush, puncture, or shred these headphones.
• Do not heat above 113°F (45 °C).
• Do not short-circuit the internal battery or its cells.
• In the event of cell leakage, do not allow the liquid to come in contact with the skin or the eyes.
• The internal battery is not end-user replaceable.
• Only use the included charging case with the Motif II A.N.C. earbuds.

DISCLAIMER

• Stated play time is calculated using a random selection of music, played at medium volume.
• The information contained herein is correct at the time of publication, with reservation for editorial errors. This product is software dependent and its functions and compatibility can change when updating the software.
• Hereby, Zound Industries International AB, declares that this product complies with 2014/53/EU and the UK
• The Radio Equipment Regulations 2017 (SI2017/1206).
• Maximum RF transmit power: Bluetooth (2402-2480 MHz) < 20 dBm
• The full text of the EU and UKCA declaration of conformity is available at the following website: www.marshallheadphones.com/doc.
• Designed in Stockholm
• Produced in China

Marshall is a trademark of Marshall Amplification Plc. Permission granted. Design of product and packaging are intellectual properties of Zound Industries International AB, Centralplan 15 111 20 Stockholm, Sweden. © Zound Industries International AB. All Rights Reserved. The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license.

References

• Marshall.com
• Anatel — Agência Nacional de Telecomunicações
• Marshall — 60 years of loud | Marshall.com
• Marshall.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>