JOY-iT JT-DPM-CP Wireless Remote Control For DPM Power Supplies Instructions
- June 17, 2024
- JOY-It
Table of Contents
JOY-iT JT-DPM-CP Wireless Remote Control For DPM Power Supplies
GENERAL INFORMATION
Dear customer, thank you for choosing our product. In the following, we will show you how to use your product.Should you encounter any unexpected problems during use, please do not hesitate to contact us. This wireless remote control uses a 2.4 GHz RF module to send signals tothe power supply and to receive signals from the power supply. Moreover, it has a range from up to 10 meters. It has a built-in 3.7 V and 2000 mAh lithium battery which is rechargeable and can be thereby used for more than 10 hours consistently. Additionally, it has a 2.4-inch TFT display with a high resolution. The settings can be easily and fast adjusted because of the multi-functional buttons and a knob.
TECHNICAL SPECIFICATIONS
STRUCTURE
FUNCTIONS
SETUP
Configurate connection
To connect the remote control, you have to open the same channel and the same
address with the remote control and with the power supply. Thereby
Adjust values of voltage and current
To adjust the voltage, press “V“ to select the first digit in the voltage
settings. With the knob, it is possible to change the value. The other digits
can be selected through the arrow keys which can be adjusted with the knob
either. You must press “V“ to confirm your settings. To adjust the current,
you have to press “A“ and you can navigate through the current settings the
same way as in the voltage settings. With “A“ you can confirm your settings.
- If the load current reaches the set current, the output is at the same level as the set current and constant current. Then the CC light comes on.
- If the load current is below the set current, the output is a constant voltage. The CV light comes on.
SET menu
To open the SET menu, press “SET“. There you can find all functions like Load,
Save, etc. which can be selected. With the knob or with the arrow keys is it
possible to select the different modes and with “OK“ you open the menu points
and confirm there your adjustments or rather run the different functions? The
different values in the menu points can be adjusted with the knob and the
arrow keys.
Boost charge
The remote control also has the function of a boost charge because it has the
keys M1, M2, M3 and M4. With these keys is it possible to load directly the
values from memory locations with the same name as the keys. Normally they
must be selected in the SET menu.
Key lock
You can activate the key lock with holding down “SET“. To unlock it again hold
it down again. If the key lock is activated, a red lock is displayed. In
contrast to green open lock which displays the deactivated key lock.
Upper and lower limit
You can set the upper and lower limits in the SET menu. First, you have to
adjust the desired values of voltage and current in the voltage and current
settings. After that, you open the SET menu and run the requested limit. The
earlier set value is now saved as the minimum or the maximum. The remote
control shows “MIN“ or “MAX“ if it reaches the limit with your adjustments. To
reset the limits again, you have to run the function Clear from the SET menu.
DECLARATION OF CONFORMITY
Hereby, Simac Electronics Handel GmbH declares that the radio equipment type JT-DPM-CP complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www .simac-gmbh.de/CE/jt-dpm-cp.pdf
information on transmission power and frequency band:
- frequency band: 2412 ~ 2472 MHz
- max. transmission power: 11.93 dBm
SUPPORT
If any questions remain open or problems arise after your purchase, we are
available by e-mail, telephone and with a ticket support system to answer
these.
- E-Mail: service@joy-it.net
- Ticket-System: http://support.joy-it.net
- Telephone: +49 (0)2845 9360 – 50 (Mon. – Thur.: 08:45 – 17:00, Fri.: 08:45 – 14:30) For further information visit our website: www.joy-it.net
- www.joy-it.net
- Simac Electronics Handel GmbH
- Pascalstr. 8 47506 Neukirchen-Vluyn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>