DELL P2425HE 24 Inch USB-C Monitor Instructions
- June 1, 2024
- Dell
Table of Contents
DELL P2425HE 24 Inch USB-C Monitor
Product Specifications
- Model: P2425HE Monitor
- Memory: DDR4, 2667 MHz
- Non-Volatile Components:
- EEPROM – 16 K-bit for storage of system settings (OSD)
- System Flash – 32 M-bit for storage of system firmware
- PD Controller – 8 M-bit for storage of PD controller firmware
- Flash USB HUB – 2 M-bit for storage of USB HUB firmware
Product Usage Instructions
Powering On/Off
- Connect the monitor to a power source using the provided power cord.
- Press the power button to turn on the monitor.
- To power off, press the power button again and disconnect the power cord.
Adjusting Settings
- To adjust settings such as brightness, contrast, and colour, navigate through the monitor’s OSD (On-Screen Display) using the control buttons located on the monitor.
Connecting External Devices
- You can connect external devices such as laptops or gaming consoles to the monitor using the available USB ports and HDMI/VGA inputs.
Maintenance
- Regularly clean the monitor screen with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials that may damage the screen.
FAQ
- Q: What should I do if the monitor does not display any images?
- A: Check the connections between the monitor and your device. Ensure that the input source is selected correctly on the monitor.
- Q: How can I adjust the volume on the monitor?
- A: The P2425HE Monitor does not have built-in speakers. You will need to adjust the volume on your connected external device.
- Q: Can I wall-mount this monitor?
- A: Yes, this monitor is VESA mount compatible. Make sure to use appropriate VESA mounting hardware for secure installation.
Statement of Volatility
Statement of Volatility – Dell P2425HE Monitor
CAUTION: A CAUTION indicates either potential damage to hardware or
erasure of data and tells you how to avoid the problem.
The P2425HE Monitor contains both volatile and non-volatile components.
Volatile components erase their data immediately after power is removed from
the component. Non-volatile components continue to retain their data even
after power is removed from the component. The following non-volatile
components are present on the P2425HE Monitor system board.
Table 1. List of non-volatile components on system board
Description| Reference designator| Volatility description|
User accessible for external data| Remedial action (action
necessary to erase data)
---|---|---|---|---
System EEPROM| U8| Non- Volatile memory,16 K- bit
For Storage of system setting (OSD)
| No| NA
System flash| U9| Non- Volatile memory, 32 M- bit For Storage of system
firmware| No| NA
PD Controller Flash| U23| Non- Volatile memory, 8 M- bit
For Storage of PD controller firmware
| No| NA
USB HUB
Flash
| U18| Non- Volatile memory, 2 M- bit
For Storage of USB HUB firmware
| No| NA
USB HUB
Flash
| U20| Non- Volatile memory, 2 M- bit
For Storage of USB HUB firmware
| No| NA
CAUTION: All other components on the system board erase data if power is removed from the system. Primary power loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR4, 2667 MHz). Secondary power loss (removing the onboard coin-cell battery) destroys system data on the system configuration and time-of-day information.
© 2024 Dell Inc. or its subsidiaries. All Rights Reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.