AUDIOFRENZY Hana SL Mono Phono Cartridge Instruction Manual
- May 15, 2024
- AUDIOFRENZY
Table of Contents
AUDIOFRENZY Hana SL Mono Phono Cartridge
INTRODUCTION
Thank you for purchasing the SL MONO cartridge. If you play a mono record with
a stereo cartridge, imperfections such as crosstalk, noise, phase errors,
tracking error, anti skating and distortion due to the difference between the
left/right channels will result in an unstable and partially fuzzy image.
A mono switch to some extent can improve this, however, a mono cartridge is
the only way to get the best sound from a mono record.
The SL MONO Shibata design diamond needle profile will ensure you get the best
possible detail and accuracy from your mono records.
Color and polarity of SL-MONO output terminal pins
BATTERY INSTALLATION
The SL MONO cartridge is constructed with two coils, it can therefore be used in the following 3 ways, depending on your circumstance:
CONNECTIVITY
Option 1
Wire cartridge as for stereo reproduction, illustrated below.
Channel 1. Red +(positive) and Green – (negative)
Channel 2. White +(positive) and Blue – (negative)
Option 2
This option works for phono amplifiers with a Left/Right channel selection
switch.
Option 3
Use this option if one loudspeaker is used and you have a mono amplifier, or
left/right balance control on your stereo amplifier. Turn fully to the one
channel used.
Specification
| Stylus | Nude Diamond Shibata |
|---|---|
| Stylus Shape | 0.27×1 .57 mil |
| Cantilever | Aluminum |
| Output level | 0.4mv/1 KHz |
| Vertical Tracking force | 2gr |
| Trackability | 70µ m/2gr |
| Frequency response | 15-32,000Hz |
| Impedance | 23Ω/1 KHz |
| Suggested load impedance | >2000Ω |
| Cartridge weight | 5gr |
| Body Color | Black |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>