iLIVE IAEBTN333 Truly Wireless Active Noise Canceling Earbuds User Manual

iLIVE IAEBTN333 Truly Wireless Active Noise Canceling Earbuds

Controls and Functions

Charging the Case
The earbuds have a total battery life of approximately 7.4 hours at 50% volume. To charge the case, use the USB-C to USB cable (included), to connect to the USB port of a powered-on When the case is charging the Power Indicator LED blue. The total charge time for the case is approximately 2 hours.

Multi-Function Button

Note: The Function Touch Pad is sensitive and must be touched or tapped to operate properly.

General
Tap and hold for 5 seconds to power ON/OFF.

Phone Calls
Tap to answer/end phone calls. Tap and hold for 2 seconds to reject incoming calls.

Voice Assist
Tap and hold for 3 seconds to activate Voice Assistant (LEFT). Active Noise Cancellation (ANC) Tap and hold for 3 seconds to cycle between ANC ON/ANC OFF Transparent Mode (Right).

Music

• Tap to play/pause music.
• Tap twice to skip to the next track (RIGHT).
• Tap twice to play previous tracks (LEFT).
• Tap 3 times to turn the volume up (RIGHT).
• Tap 3 times to turn the volume down (LEFT).

Charging the Earbuds

1. Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case.
2. Charging time for the earbuds is approximately 2 hours.

Charging Case & Auto-On Feature

While the case power is ON

• Placing the earbuds in the charging case will automatically power them off and begin charging.
• Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).

Pairing Bluetooth

Note: When powered on, earbuds automatically link and enter pairing mode.

1. With the earbuds powered on, you can connect to your Bluetooth device.
2. On your Bluetooth device, search for nearby devices in your Bluetooth settings and select IAEBTN333. A voice prompt will announce the Bluetooth connection when successfully connected to your Bluetooth device.
3. Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust the volume.

PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4 GHz bands or in high wireless traffic areas.

Reconnect Bluetooth

If you have trouble connecting the earbuds and your device or if the earbuds become unpaired, do the following:

1. Delete IAEBTN333 from your list of devices in your Bluetooth settings
2. Press and hold the Multi-Function Button for 5 seconds to turn the earbuds off. Press and hold the Multi-Function button for another 5 seconds to turn the earbuds back on.
3. Return the earbuds to the case. Remove them and allow them to automatically enter pairing mode. Connect to your Bluetooth device using the steps above.

Active Noise Canceling & Transparent

The Active Noise Cancellation feature will electronically mute background noise. It can be used to enhance the quality of any music or audio that is playing through the earbuds. Transparent Mode enables the earbuds to pick up external sounds through the microphone, so you can stay aware of your surroundings or connected to conversations around you when needed.

Note: Both of these modes will affect battery life.

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Additional Warnings

• WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
• WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with required Federal product guidelines.

References

• DPI,inc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>