ILIVE THE2023BDL Movie Theater Kit User Guide

: October 30, 2023
: iLive

Table of Contents

Bundle Contents
Power
Activating the Bluetooth Speaker
Connecting the Projector to Bluetooth Speakers
Setting Up the Projection Screen
Connecting to a DVD player, Gaming Console, or other device with HDMI
Using the Tripod
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ILIVE THE2023BDL Movie Theater Kit

ILIVE THE2023BDL Movie Theater Kit

Bundle Contents

This bundle contains a movie theater kit to enhance your viewing experience. The bundle contains:

1 Projector
1 Projection screen
1 42” Tripod
1 Wireless speaker

Power

Plug the AC/DC power adapter (included) into a standard wall outlet and the DC power input on the side of the unit. After connecting power, please allow approximately 5 seconds to pass before powering the unit ON.

Activating the Bluetooth Speaker

Power on the speaker. The speaker should default to Bluetooth mode. If Bluetooth is not active, press the Mode button to enter Bluetooth mode.
If you are having trouble connecting to the projector, press and hold the Play/ Pause/Pair button for 3 seconds to enter pairing mode on the speaker.
When successfully paired, a voice prompt will announce the connection.

Connecting the Projector to Bluetooth Speakers

NOTE: Bluetooth is OFF by default when the projector first powers ON. Bluetooth can be turned ON or OFF from the Sound Menu of the projector.

Enable Bluetooth on the included speaker or on another Bluetooth enabled speaker/sound bar you wish to connect to.
Power on the projector and make sure the projector’s Bluetooth is ON (see note above). The projector will begin searching for nearby Bluetooth devices to connect to, and will automatically initiate pairing. Note: To eliminate confusion, disable Bluetooth on all receivers to which you do no wish to connect.
When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a chime or tone. Check the user manual on your Bluetooth receiver for more information.
When successfully connected, the projector will display the Bluetooth receiver’s (your speaker or sound bar) name on the top right portion of the Main Menu screen, and sound played from the projector will be heard through the Bluetooth receiver.

After initial pairing, the projector and Bluetooth speakers will stay paired unless unpaired manually or erased due to a reset on either device.

Setting Up the Projection Screen

Package includes screen, mounting hooks and ropes.
Unfold the screen and locate a desired position on the wall for installation. Mark the position ofthe grommets on the wall. Note: Please make sure to stretch tight to avoid wrinkling or sagging.
Remove adhesive strips at the back side of the hooks and attach the mounting hooks to the positions you marked on the wall in step 2.
Note: The adhesive strips should not be used on textured walls, wallpaper, brick, non-stick surface, or fabrics.
Mount the screen on the hooks.

Connecting to a DVD player, Gaming Console, or other device with HDMI

Locate the HDMI output on your device.

Set the connected device and projector media source to HDMI.
You can set the source using the remote or the controls on the projector.
Note: Please make sure to remove the projector’s lens cap in order to see picture.

Using the Tripod

Before using the tripod, adjust each leg to the desired height and angle, the lock each section securely. It is best to use the tripod on a flat. level surface.
Attach your projector to the Camera Mount using the screw on the top side of the mount. Use the Pan Bar to move the projector to angle you desire.

Warning: Please make sure the projector is securely fastened to the tripod to avoid causing damage to the unit from falling.