iLive Platinum IAHP87 Wireless Noise Canceling Headphones User Manual
- June 2, 2024
- iLive
Table of Contents
Wireless Noise Canceling Headphones
User’s Guide for Model IAHP87 v1924-01
FCC Warnings
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
- To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
- This product meets and complies with all Federal regulations.
Overview
Features
- Supports Bluetooth
- Wireless range: 33 feet
- Built-in microphone
- Aux in (3.5mm audio input)
- Folding adjustable headband
- On-ear controls
- Voice prompts announce headphone operations
- DC battery power: built-in rechargeable lithium-ion battery
- Micro-USB port for battery recharge
- Battery life: approx. 8 hours
Includes
- Micro-USB to USB charging cable
- 3.5mm audio cable
- 3.5mm female to 2 x 3.5mm male audio adapter
- Travel case
Charging the Battery
Requires a Micro-USB to USB cable (included). The low battery indicator will
flash for 1 minute, then the unit will automatically power OFF.
1. Using a Micro-USB to USB cable (included), connect the headphones to
the USB port of a powered-on computer or USB power adaptor (not included).
Noise Canceling
The Noise Canceling feature will electronically mute background noise. It can
be used with the Bluetooth or Aux In modes to enhance the quality of any music
or audio that is playing through the headphones.
Noise Canceling mode will function even if the headphones are not powered ON.
To conserve battery power, it is recommended to power the headphones OFF if
you want to use the Noise Canceling feature without playing audio.
1. To activate noise canceling, press the right side of the Main
Control button. A green LED light in the button will turn ON.
2. To deactivate noise canceling, press the right side of the Main
Control button again. The green LED light in the button will turn OFF.
Bluetooth Wireless Audio
Pairing to a Device and Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user, or erased due to a reset of the device. If your device should become
unpaired or you find it is unable to connect, repeat the steps listed here.
- Press and hold the left side of the Main Control button for approximately 4 seconds to power ON and begin pairing. LED lights in the button will begin flashing red and blue. When pairing, remain within 3 feet of the unit.
- Using the controls on your Bluetooth device, select the IAHP87 in your Bluetooth settings/device menu. If your device requests a password, enter the default password 0 0 0 0. If need be, refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
- When successfully paired, the LED lights will only flash blue and a chime will sound through the unit. Audio played through the connected Bluetooth device should now be heard through the headphones.
- Use the controls on your Bluetooth device to select and begin playing audio. To play or pause audio using the headphone controls, press the left side of the Main Control button.
Using the Speakerphone
- When a call is received, a ringtone will sound through the unit.
- To accept the call, press the left side of the Main Control button, or use the controls on the connected phone.
- To refuse the call, press and hold the left side of the Main Control button, or use the controls on the connected phone.
- To call back, double press the left side of the Main Control button.
Aux In
Aux In mode will function even if the headphones are not powered ON. To conserve battery power, keep them powered OFF when using Aux In. Requires a 3.5mm audio cable (included).
- Connect a 3.5mm audio cable to the Aux In on the unit and the audio output on an audio device.
- Use the controls on the connected device to select and play audio.
International Support
To download this User’s Guide in English, Spanish, or French, or to get
answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215
| Email Support: prodinfo@dpiinc.com | Email Parts :
partsinfo@dpiinc.com
Copyright © 2017 Digital Products International (DPI, Inc.) All other
trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
iLive Platinum IAHP87 Wireless Noise Canceling Headphones User Manual –
Optimized PDF
iLive Platinum IAHP87 Wireless Noise Canceling Headphones User Manual –
Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>