ILIVE ISB143B Brightside Wireless Bluetooth Speaker User Guide
- May 15, 2024
- iLive
Table of Contents
ILIVE ISB143B Brightside Wireless Bluetooth Speaker
Product Information
- Specifications
- Model: ISB143B v3142-01
- Features: Bluetooth connectivity, Micro SD slot, USB-C input, Aux input
- Charging Time: Approximately 180 minutes
Product Usage Instructions
- Charging the Battery
- To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered-on computer or USB power adapter (not included) and a standard power outlet.
- The Indicator LED will display a solid red light while charging. When fully charged, the light will turn off.
- Pairing & Playing Bluetooth Audio
- Power on your speaker by pressing and holding the Power/Play/Pair button for 3 seconds.
- The speaker defaults to Bluetooth Mode when first powered on and is ready to pair automatically.
- Press and hold the Mode button on one of your speakers to act as the host and search for another powered-on ISB143 speaker to connect automatically.
- When successfully paired, a voice prompt will announce “Bluetooth connected.” Your Bluetooth device can now connect to the paired speakers.
- Using a Micro SD Card
- Load a Micro SD memory card into the appropriate media port on the speaker.
- The speaker will automatically switch to SD mode.
- Use the controls on the speaker to select and play audio from the connected Micro SD card.
FAQs
- Q: How do I know when the battery is low?
- A: When the battery is low, a voice prompt will announce “Low battery,” and then the unit will automatically power off.
- Q: How do I pair multiple speakers using Bluetooth TWS?
- A: When powered on, press and hold the Mode button on one of your speakers to search for another powered-on ISB143 speaker. The speakers will connect automatically once found.
- Q: Where can I find additional support or download the User’s Guide in different languages?
- A: Visit the support section at www.iLiveElectronics.com for answers to frequently asked questions, downloads in English, Spanish, or French, and contact information for customer support.
Features
- Bluetooth wireless 5.3: range approximately 33ft.
- Bluetooth TWS – Pair with another ISB143 speaker
- Micro SD card port
- Aux In
- Digital volume control
- Voice prompts
- Built-in rechargeable battery: approximately 4 hrs of playtime at 50% volume
- USB-C port for battery recharge
Includes
- User’s Guide
- USB-C to USB charging cable
Controls
- Power/Play/Pair: Press and hold for 3 seconds to power on your speaker. Press and hold again to power off your speaker. When on, press once to play or pause music tracks. Press twice to connect or disconnect from Bluetooth.
- Mode: Press to change source modes to Bluetooth, AUX, or MicroSD. Press and hold to activate TWS Mode.
- Lights: Press to cycle through LED light modes. Press twice to turn the lights off. Press and hold to turn voice prompts on/off.
- Vol +/Next: Press to increase the volume level. Press and hold to play the next track.
- Vol -/Previous: Press to decrease volume level. Press and hold to play the previous track.
Inputs
Voice Prompts
- Press and hold the Lights button for 5 seconds to turn voice prompts on/off.
Charging the Battery
- To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker a powered-on computer or USB power adapter (not included) and a standard power outlet.
- The charging time is approximately 180 minutes.
- When the battery is low, a voice will announce “Low battery,” and then the unit will automatically power OFF.
- While the unit is charging, the Indicator LED will display a solid red light. When the battery is fully charged, the light will turn off.
Pairing & Playing Bluetooth Audio
- When first powered on, the speaker defaults to Bluetooth Mode and is ready to pair automatically. When pairing, remain within 3 feet of the Bluetooth device.
- Using the controls on your Bluetooth device, select ISB143 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information.
- When successfully paired, a voice will announce “Bluetooth connected.” Your Bluetooth device will now be heard through the speaker.
- Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
- After initial pairing, the speaker will automatically connect to the last Bluetooth device used whenever it is in Bluetooth Mode.
- Note: To disconnect a device, press the Power button twice. The speaker will re-enter pairing mode and can be paired with a different device using the steps above.
Bluetooth TWS
- When powered on, press and hold the Mode button on one of your speakers. This speaker will act as the host and will begin searching for another powered-on ISB143 speaker. The speakers will connect automatically.
- You can now connect the paired speakers to a Bluetooth device using the standard set-up steps.
- The two speakers will automatically reconnect the next time they are both on
- Press and hold the Mode button on either speaker to disconnect the speakers and exit TWS mode.
Micro SD
- Load a Micro SD memory card into the appropriate media port.
- The speaker will automatically switch to SD mode.
- Use the controls on the speaker to select and play audio from the connected drive.
FCC
FCC WARNINGS
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
ADDITIONAL WARNINGS
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. This product meets and complies with required Federal product guidelines.
International Support
- To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com.
Contact Information
- Website: www.iLiveElectronics.com.
- Email Support: prodinfo@dpiinc.com.
- Email Parts: partsinfo@dpiinc.com.
- Phone Support: 1-888-999-4215
Warranty
- For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com.
Protect for Today Sustain for Tomorrow
Specifications are subject to change without notice. Copyright © 2023 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. User’s Guide for Model ISB143B v3142-01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>