Portable Wireless Tailgate Speaker ISB380 User Manual

June 2, 2024
iLive

Portable Wireless Tailgate Speaker ISB380 User Manual

Portable Wireless Tailgate Speaker ISB380 User Manual

Important Safety Instructions

  • Read these Instructions.

  • Keep these Instructions.

  • Heed all Warnings.

  • Follow all instructions.

  • Do not use this apparatus near water.

  • Clean only with a dry cloth.

  • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
    prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  • Only use attachments/accessories specified by the manufacturer.

  • Unplug this apparatus during lightning storms or when unused for long periods of time.

  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  • Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

FCC Warnings

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

  • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

  • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket
    outlet completely.

  • WARNING: Shock hazard – Do Not Open.

  • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

  • WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.

  • WARNING: Do not ingest battery, chemical burn hazard.

  • Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

  • Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

WARNING: This product can expose you to chemicals including lead, which is known to
the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov This product meets and complies with all Federal regulations.

Overview

Features

  • Bluetooth 5.0 wireless – range 60 ft.
  • Voice prompts announce speaker functions
  • Single 8” speaker
  • Retractable pull handle and wheels
  • LED display
  • Digital FM radio with auto scan
  • Microphone input
  • Microphone echo control
  • 3.5mm Line In
  • Micro SD and USB media ports – supports MP3 file format
  • Built-in rechargeable battery
  • Battery life: approx. 2.5 hours at 50% volume

Includes

  • USB cable for battery recharge
  • User’s Guide

Control Panel

  1. Echo: Adjust microphone echo effect.
  2. Microphone Volume: Adjust microphone volume level.
  3. Display: Shows battery level, FM radio frequency, audio track info, and source info for the speaker and microphones.
  4. Power/Volume: Turn to power ON and adjust volume level.
  5. Microphone Input: When in use, the microphone will always be heard, regardless of the source input.
  6. DC Power Input & Charge Indicator LED: Use to charge the internal battery and power the speaker.
  7. Micro SD Card Port
  8. USB Media Port
  9. Mode: Press to change audio source between Bluetooth, Line In, and FM. Long press to turn the light On/Off.
  10. /Tune± : Short press to skip audio tracks (BLUETOOTH/USB) or radio presets (FM). Long press to scan for the next available FM radio station (FM).
  11. / Pair/ : Press and hold to begin pairing to a Bluetooth device (BLUETOOTH). Press to play or pause tracks (BLUETOOTH, USB).
  12. Line In (3.5mm Input)

Portable Wireless Tailgate Speaker ISB380 - Control
Panel

Charging the Battery

To power the unit or charge the internal battery, connect the DC power input on the speaker to a standard power outlet using the USB charging cable and a USB power adapter (not included).

Battery life is approximately 2.5 hours at 50% volume. Charging Time is approximately 3-4 hours. While charging the battery indicator light will display a red light, and turn off when the battery is fully charged.

Portable Wireless Tailgate Speaker ISB380 - Charging the
Battery

Bluetooth Wireless

Pairing & Playing Audio

After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the steps listed here.

  1. The speaker will power on in Bluetooth Mode. A voice will say, “Bluetooth,” and the pairing indicator will flash the word “Blue”. When pairing, remain within 3 feet of the Bluetooth device.
  2. Using the controls on your Bluetooth device, scan for and select ISB380 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
  3. When successfully paired, the pairing indicator will turn solid and a voice will announce the connection.
  4. Use the controls on the connected device to select and begin playing audio. Audio played through the connected Bluetooth device will now be heard through the speaker. Use the controls on the speaker or the connected device to play, pause, and adjust volume.

Note : If your device should become unpaired or you find it is unable to connect, press & hold the button to enter to Pairing Mode. A voice will announce “Bluetooth is connecting” and you can connect to the speaker manually.

FM Radio

Radio Reception and the 3.5mm Audio Cable (Not included)

An FM receiver is built into the speaker but functions best when a 3.5mm audio cable is connected to the speaker. Adjust the position of the cable and the speaker to improve FM radio reception.

Radio Tuning and Saving Station Presets

  1. Press the Mode button to switch to FM Radio Mode. The display will show the station frequency, Ex: 101.1.
  2. Press and hold to scan and save radio stations automatically. Radio stations will be assigned a “Ch” number, Ex: Ch 18.
  3. Press to tune the presets

SD Memory Cards & USB Drives

  1. Load a Micro SD memory card or USB drive into the appropriate port.
  2. The speaker will automatically switch to SD Card Mode (“SD” on the display) or USB Mode (“USB” on the display) and begin playing media on the connected storage device.
  3. Use the controls on the speaker to select and play audio from the connected drive.

Portable Wireless Tailgate Speaker ISB380 - SD Memory
Cards

Line In

Requires a 3.5mm audio cable.

  1. Connect a 3.5mm audio cable to the Line In on the unit and the audio output/headphone jack on an audio device.
  2. Press Mode to switch to Line In Mode (“LINE” on the display).
  3. Use the controls on the connected device to select and play audio.

Portable Wireless Tailgate Speaker ISB380 - Line In

Customer Support

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]

Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.


Portable Wireless Tailgate Speaker ISB380 User Manual – Optimized PDF
Portable Wireless Tailgate Speaker ISB380 User Manual – Original PDF

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

iLive User Manuals

Related Manuals