RELIABILT LS-SW-BWB18 Waste Basket Base Cabinet Instruction Manual
- June 17, 2024
- RELIABILT
Table of Contents
- RELIABILT LS-SW-BWB18 Waste Basket Base Cabinet
- Product Information
- Product Usage Instructions
- FAQ
- SAFETY INFORMATION
- PREPARATION
- TOOLS REQUIRED
- FEELING CONFIDENT?
- CARE AND MAINTENANCE
- WARRANTY
- PACKAGE CONTENTS
- HARDWARE CONTENTS
- INSTALLATION OVERVIEW
- MORE INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RELIABILT LS-SW-BWB18 Waste Basket Base Cabinet
Product Information
Specifications:
- Brand: RELIABILT
- Model Numbers: LS-SW-BWB18, LS-SG-BWB18
- Assembly Time: 40 – 50 minutes (2-person assembly recommended)
- Country of Origin: Vietnam
Product Usage Instructions
Package Contents
-
* I – Drawer Back Panel- C – Box Back Panel
- A2 – Box Side Panel – Right
- G2 – Drawer Side Panel – Right
Hardware Contents
-
* AA – 5/8 Flat Head Phillips Screw x 10
Assembly Instructions
-
1. Insert the box back panel (C) into the right box side panel (A2) groove.
Care and Maintenance
Ensure to regularly clean the product with a damp cloth. Avoid using harsh chemicals that may damage the finish.
Contact Information
If you have any questions or encounter issues during assembly, contact customer service at 866-386-7941.
FAQ
Q: What should I do if I am missing a hardware piece?
A: Contact customer service for assistance in obtaining the missing part.
RELIABILT and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this RELIABILT product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-386-7941, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
ascs@lowes.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Electric, plumbing, gas lines and other utilities, are frequently installed or embedded behind walls where cabinets are being installed. Before drilling any holes or driving any screws, be sure you will not be contacting any of these utilities. Failure to follow these instructions may result in property damage and serious or fatal injury. If you do not feel confident in your ability to ensure that you will not contact utilities behind a wall during installation, please contact a licensed contractor to install the cabinets.
- This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
CAUTION
Avoid using cleaners that contain bleach, ammonia, citrus based products or any type of abrasives (see cleaner label). These cleaners can cause damage to the cabinet finish.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Please visit Lowes.com for additional assembly resources./ Para obtener recursos de ensamblaje adicionales, visite Lowes.com.
Estimated Assembly Time: 40 – 50 minutes
TOOLS REQUIRED
(NOT INCLUDED)
FEELING CONFIDENT?
Visit lowes.com for more information.
CARE AND MAINTENANCE
- A damp cloth is sufficient for normal spills. Dry the surface immediately.
- Most general-purpose household cleaners can be used to clean doors.
- Caustic agents and/or abrasive scrubbers, or oven cleaners, should not be used.
- Liquid on the surface should not be left for long periods of time.
WARRANTY
Contact the customer service team at 866-386-7941
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Use 1/2” round head phillips screw x 10
- Use 1/2” round head phillips screw x 10
- Insert the box back panel (C) into the right box side panel (A2) groove.
- Use 1/2” round head phillips screw x 4
- Insert the left box side panel (A1) into the box back panel (C) groove.
- Use 1/2” round head phillips screw x 4
- Insert the box bottom panel (B) into the grooves.
- Fasten box back panel (C) using 1” flat head phillips screw (GG) x 2.
- Attach the face frame (D) to the cabinet box.
- Secure four corner braces (EE) using 1/2” round head phillips screw (ee) x 8.
- Attach the toe kick panel (E) to the cabinet box and align with the pre-drilled holes
- Secure the toe kick panel (E) with corner braces (EE) using 1/2” round head phillips screw (ee) x 4.
- Insert the base of glide and runner profile (AA) into the pre-drilled holes on the box back panel (C). Secure two bases using 5/8” flat head phillips screws (aa) x 4.
- Use 5/8” flat head phillips screw x 4
- Attach the right drawer side panel (G2) to the drawer face panel (F).
- Attach the left drawer side panel (G1) to the drawer face panel (F).
- Tilt the drawer side panels slightly and insert the drawer bottom panel (H) and the drawer back panel (I).
- Firmly connect the drawer side panels with the drawer back panel (I).
- Rotate drawer to bottom side facing up, attach the adjustable drawer clips (BB) to the drawer bottom panel (H). Secure the adjustable drawer clips with the inside of drawer face panel (F) using 5/8” flat head phillips screw (bb1) x 4.
- Secure adjustable drawer clips (BB) to drawer bottom panel (H) using 3/8” flat head phillips screw (bb2) x 4.
- Attach the rubber bumper (HH) to the drawer face panel (F) .
- Insert the drawer.
Insert the drawer on the extended runner. To secure the drawer clips with the
runner, push the drawer in. Upon successful locking, a click can be heard.
Ensure that the hook on each runner profile fits into the corresponding holes
on the drawer back panel.
To level the drawer, use the green spur gears 1 to adjust drawer left and
right, the green spur gears 2 to adjust drawer up and down, and the green spur
gears 3 to adjust drawer inside and outside.
To take the drawer out, push the green clips at the same time to unlock drawer
clips.
- Place 4 plastic counter corner blocks (DD) on each corner of the cabinet.
- Secure the plastic counter corner blocks (DD) using 1/2” round head phillips screw (dd) x 8 (2 screws for 1 corner block)
- The 3-fold ball bearing slides (II) should be extended to their maximum length. Press down the lever on one side of the slide and up the lever on the other side to separate them into slide 1 and slide 2.
- Align the holes on slide 1 with the pre-drilled holes on the drawer side panel. Drill 1/2” flat head Phillips screws (JJ) x 6.
- Align the holes on slide 2 with the pre-drilled holes on the side of the tray. Drill 1/2” flat head Phillips screws (JJ) x 6.
- Align the pre-drilled holes on the tray (P) with the ones on the inside of the door panel (J). Drill 1” flat-head Phillips screw (GG) x 3 to connect the tray to the door panel.
- Attach the rubber bumper (HH) to the top and bottom corner of the door panel (J) and drawer front..
- Align slide 1 with slide 2 and push the drawer in. Upon successful locking, a click can be heard.
MORE INFORMATION
To see a video of the assembly process and to get information on the suggested installation process scan here.
SCAN HERE FOR VIDEO ASSEMBLY AND INSTALLATION INSTRUCTIONS.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>