RELIABILT LS-SW-DB30-2 Drawer Base Cabinet Instruction Manual

RELIABILT LS-SW-DB30-2 Drawer Base Cabinet

Product Information

Specifications:

• Model: LS-SW-DB30-2, LS-SG-DB30-2
• Assembly Time: 40 – 50 minutes
• Tools Required: Not Included

Product Usage Instructions

Package Contents:

• A1 Box Side Panel – Left
• A2 Box Side Panel – Right
• B Box Bottom Panel
• C Box Back Panel
• D Face Frame
• E Toe Kick Panel
• F Drawer Face Panel
• G1 Drawer Side Panel – Left
• G2 Drawer Side Panel – Right
• H Drawer Bottom Panel
• I Drawer Back Panel

Hardware Contents

• 5/8 Flat Head Phillips Screw x 20 (AA)
• 5/8 Flat Head Phillips Screw x 8 (BB1)
• 1/2 Round Head Phillips Screw x 8 (DD)
• Corner brace x 11 (EE)
• 1/2 Round Head Phillips Screw x 44 (EE)

Assembly Instructions

1. Follow the step-by-step instructions provided in the manual.
2. Use the specified hardware for each component.
3. Ensure all panels are properly aligned before tightening screws.
4. Refer to the model-specific diagrams for accurate assembly.
5. Consider assembling with two persons for ease and safety.

Care and Maintenance:

Proper care and maintenance will ensure the longevity of the product. Regularly clean and inspect for any damages. Avoid using harsh chemicals that may damage the finish.

Contact Information:

If you encounter any issues or have questions, please contact customer service at 866-386-7941 or email [email protected].

FAQ

Q: What should I do if a part is missing from the package?

A: If any part is missing, please contact customer service for assistance in obtaining the necessary replacement.

Q: Can the product be disassembled once assembled?

A: While disassembly is possible, it may not be recommended as it can affect the structural integrity of the product. Proceed with caution if disassembly is required.

RELIABILT and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Thank you for purchasing this RELIABILT product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-386-7941, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at [email protected].

SAFETY INFORMATION

Please read ~and understand this entire manual before attempting to assemble, operate or install the product

warning

Electric, plumbing, gas lines and other utilities, are frequently installed or embedded behind walls where cabinets are being installed. Before drilling any holes or driving any screws, be sure you will not be contacting any of these utilities. Failure to follow these instructions may result in property damage and serious or fatal injury. If you do not feel confident in your ability to ensure that you will not contact utilities behind a wall during installation, please contact a licensed contractor to install the cabinets.
This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov 

CAUTION

Avoid using cleaners that contain bleach, ammonia, citrus based products or any type of abrasives (see cleaner label). These cleaners can cause damage to the cabinet finish.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Please visit Lowes.com for additional assembly resources./ Para obtener recursos de ensamblaje adicionales, visite Lowes.com.

Estimated Assembly Time: 40 – 50 minutes

2-person assembly recommended

TOOLS REQUIRED

(NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

CARE AND MAINTENANCE

• A damp cloth is sufficient for normal spills. Dry the surface immediately.
• Most general-purpose household cleaners can be used to clean doors.
• Caustic agents and/or abrasive scrubbers, or oven cleaners, should not be used.
• Liquid on the surface should not be left for long periods of time.

WARRANTY

Contact the customer service team at 866-386-7941

PACKAGE CONTENT

HARDWARE CONTENTS

INSTALLATION OVERVIEW

1. 1. Use 1/2” round head phillips screw x 10

2. Use 1/2” round head phillips screw x 10

3. Insert the box back panel (C) into the right box side panel (A2) groove.
4. Use 1/2” round head phillips screw x 4
5. Insert the left box side panel (A1) into the box back panel (C) groove.
6. Use 1/2” round head phillips screw x 4

7. Use 1/2” round head phillips screw x 2
8. Insert the box bottom panel (B) into the grooves.
9. Fasten box back panel (C) using 1” flat head phillips screw (GG) x 3.
10. Attach the face frame (D) to the cabinet box.

11. Secure four corner braces (EE) using 1/2” round head phillips screw (ee) x 8。
12. Attach the toe kick panel (E) to the cabinet box and align with the pre-drilled holes。
13. Secure the toe kick panel (E) and face frame (D) with corner braces (EE) using 1/2” round head phillips screw (ee) x 6
14. Insert the base of glide and runner profile (AA) into the pre-drilled holes on the box back panel (C). Secure four bases using 5/8” flat head phillips screws (aa) x 8.

15. Use 5/8” flat head phillips screw x 8.
16. Attach the right drawer side panel (G2) to the drawer face panel (F).
17. Attach the left drawer side panel (G1) to the drawer face panel (F).
18. Tilt the drawer side panels slightly and insert the drawer bottom panel (H) and the drawer back panel (I).

19. Firmly connect the drawer side panels with the drawer back panel (I).
20. Rotate drawer to bottom side facing up, attach the adjustable drawer clips (BB) to the drawer bottom panel (H). Secure the adjustable drawer clips with the inside of drawer face panel (F) using 5/8” flat head phillips screw (bb1) x 4.
21. Secure adjustable drawer clips (BB) to drawer bottom panel (H) using 3/8” flat head phillips screw (bb2) x 4.
22. Insert the drawer

Insert the drawer on the extended runner. To secure the drawer clips with the runner, push the drawer in. Upon successful locking, a click can be heard .

Ensure that the hook on each runner profile fits into the corresponding holes on the drawer back panel.
To level the drawer, use the green spur gears 1 to adjust drawer left and right, the green spur gears 2 to adjust drawer up and down, and the green spur gears 3 to adjust drawer inside and outside.
To take the drawer out, push the green clips at the same time to unlock drawer clips.

1. Place 4 plastic counter corner blocks (DD) on each corner of the cabinet.
2. Secure the plastic counter corner blocks (DD) using 1/2” round head phillips screw (dd) x 8 (2 screws for 1 corner block).
3. Attach the rubber bumper (HH) to the top and bottom corner of the door panel (J).
   

MORE INFORMATION

To see a video of the assembly process and to get information on the suggested installation process scan here.

SCAN HERE FOR VIDEO ASSEMBLY AND INSTALLATION INSTRUCTIONS.

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>