deta 1001WH Compact Automatic Hand Dryer Instruction Manual
- June 17, 2024
- deta
Table of Contents
deta 1001WH Compact Automatic Hand Dryer
Product Information
Specifications
- Input Voltage: 220-240V
- Air Speed: 30m/s
- Electrical Classification: Class I
- Noise Level (at 2m): 76dB
- Rated Power: Heater Element: 1.95kW, Motor: 350W
- IP Rating: IPX1
- Weight: 3.0kg
- Drying Time: 10-15 seconds
- Dimensions: 245x265x207mm
Product Usage Instructions
Installation Instructions
- Remove product from the packaging and mark out and drill the fixing holes on the mounting surface.
- Fix the metal bracket to the mounting surface using the wall plugs and screws provided.
- Remove the front cover by unscrewing the 4 retaining screws.
- Feed the supply cable through the cable entry hole in the hand dryer base and terminate the conductors into the terminal block ensuring correct polarity. Secure the supply cable in the cord grip.
- Replace the plastic cover and secure it with retaining screws.
- Align the mounting slots at the rear of the hand dryer with the metal bracket and clip the unit in place.
- Secure the base of the hand dryer using the provided screws.
Operation
The hand dryer is automatically activated when hands are placed under the air
outlet. It switches off within 2 seconds after hands are removed. Continuous
running will switch off after 60 seconds to conserve energy. To reactivate,
move hands away from the air outlet and place back.
FAQ (Frequently Asked Questions)
Q: What should I do if the hand dryer becomes blocked?
A: If the hand dryer becomes blocked, please contact customer support for
assistance. Do not attempt to disassemble or repair it yourself.
Q: How should I dispose of this product properly?
A: This product may contain hazardous substances, so it should not be
disposed of with general waste. Please separate it for correct treatment and
recovery. Recycle the packaging where possible.
Q: What should I do if the hand dryer is not working correctly?
A: Check the power supply and ensure proper installation following the
provided instructions. If issues persist, contact technical support for
further assistance.
Compact Automatic Hand Dryer
Features
- ABS construction for high resistance against heat, water, and detergents
- Anti-tamper cover (fixing screws included)
- Constructed with sound and vibration reducing blocks to reduce noise level
- Automatic shuts off after 60 seconds to avoid wasted energy
- Self-resetting overheat thermostat provides protection from overheating if hand dryer becomes blocked
Safety Instructions
- These instructions should be read carefully and retained after installation for future reference and maintenance.
- Ensure that the mains power is switched off before carrying out installation or maintenance.
- Installation must be carried out in accordance with the current edition of IET wiring regulations BS 7671, and by a qualified electrician.
- The hand dryer should be supplied from a switched fused spur.
- This Hand Dryer is electrical class 1 construction and must be earthed.
- Ensure all electrical connections are secure and that there are no loose strands.
- Do not install above washbasins or immediately adjacent to urinals, lavatories, baths and showers.
- When in use, the hand dryers will accumulate dust. Cleaning and maintenance must be carried out regularly.
- The unit is intended for drying hands only. Long hair should be kept away from air inlet vents.
Environmental Instructions
This product may contain substances that can be hazardous to the environment
if not disposed of properly. Electrical and electronic equipment should never
be disposed of with general waste but must be separated for its correct
treatment and recovery. Where possible recycle your packaging.
Installation Instructions
- Remove product from the packaging and mark out and drill the fixing holes on the mounting surface.
- Fix the metal bracket to the mounting surface using the wall plugs and the screws provided.
- Remove the front cover by unscrewing the 4 retaining screws
- Feed the supply cable through the cable entry hole in the hand dryer base and terminate the conductors into the terminal block ensuring the correct polarity is observed. Secure the supply cable in the cord grip provided.
- Replace the plastic cover and secure it with retaining screws
- Align the mounting slots at the rear of the hand dryer with the metal bracket and clip the unit in place.
- Secure the base of the hand dryer using the screws provided
Operation
The hand dryer is automatically activated when hands are placed under the air
outlet. Once the hands are removed, the hand dryer automatically switches off
within 2 seconds. if the hand dryer is running continuously, it will switch
off after 60 seconds to conserve energy.
To reactivate the hand dryer, move the hands away from the air outlet and
place back.
Specification
Deta Electrical Company Ltd
UK: Panattoni Park Luton Road Chalton Bedfordshire LU4 9TT
EU: Unit 16 Ashbourne Industrial Estate, Ashbourne Co. Meath, A84 W972,
Ireland
deta.co.uk
Technical Helpline: +44(0)1582 544 548
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>