RELIABILT LS-SW-B09R Base Cabinet Instruction Manual

RELIABILT LS-SW-B09R Base Cabinet

INTRODUCTION

Thank you for purchasing this RELIABILT product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-386-7941, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Electric, plumbing, gas lines and other utilities, are frequently installed or embedded behind walls where cabinets are being installed. Before drilling any holes or driving any screws, be sure you will not be contacting any of these utilities. Failure to follow these instructions may result in property damage and serious or fatal injury. If you do not feel confident in your ability to ensure that you will not contact utilities behind a wall during installation, please contact a licensed contractor to install the cabinets.
• This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

CAUTION

• Avoid using cleaners that contain bleach, ammonia, citrus based products or any type of abrasives (see cleaner label). These cleaners can cause damage to the cabinet finish.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Please visit Lowes.com for additional assembly resources.

Estimated Assembly Time: 30 – 40 minutes

2-person assembly recommended

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit lowes.com for more information.
  
  Printed in Vietnam

CARE AND MAINTENANCE

• A damp cloth is sufficient for normal spills. Dry the surface immediately.
• Most general-purpose household cleaners can be used to clean doors.
• Caustic agents and/or abrasive scrubbers, or oven cleaners, should not be used.
• Liquid on the surface should not be left for long periods of time.

WARRANTY

• Contact the customer service team at 866-386-7941

PACKAGE CONTENTS

HARDWARE CONTENTS

• CC Soft-close hinge x 2
  

  • cc1 Included:
    5/8” Flat Head Phillips Screw x 4
    

  • cc23/4” Round Head Phillips Screw x 2
    

• DD Plastic counter corner block x 4
  

  • dd Included
    1/2” Round Head Phillips Screw x 8
    
    

• EE Corner brace x 10

  • ee Included:
    1/2” Round Head Phillips Screw x 40

• FF Adjustable shelf clip x 8

• GG 1” Flat head Phillips screw x 2
  

• HH Rubber bumper x 2

INSTALLATION OVERVIEW

1. Use 1/2” round head Philips screw (ee) x 10
   

2. Use 1/2” round head Philips screw (ee) x 10
   

3. Insert the box back panel (C) into the right box side panel (A2) groove
   

4. Use 1/2” round head Philips screw (ee) x 4
   

5. Insert the left box side panel (A1) into the box back panel (C) groove
   

6. Insert the box bottom panel (B) into the grooves.
   

7. Use 1/2” round head Philips screw (ee) x 4
   

8. Fasten the box back panel (C) using 1″ flat head Philips screw (GG) x 2.
   

9. Attach the toe kick panel (E) to the cabinet box.
   

10. Secure the toe kick panel (E) with corner braces (EE) using 1/2” round head Philips screw (ee) x 4
    

11. Attach the face frame (D) to the cabinet box
    

12. Secure four corner braces (EE) using 1/2” round head Philips screw (ee) x 8.
    

13. Place 4 plastic counter corner blocks (DD) on each corner of the cabinet.
    

14. Secure the plastic counter corner blocks (DD) using 1/2” round head Philips screw (dd) x 8 (2 screws for 1 corner block).
    

15. Insert the adjustable shelf clip (FF) into the cabinet where shelves are desired.
    

16. Insert the adjustable shelf (K).
    

17. Insert the hinge (CC) to the door panel (J) and secure the hinge to door use 5/8” flat head Philips screw (cc1) x 4 (2 screws for 1 hinge).
    

18. Locate the pre-drilled holes in the door opening of the face frame and use 3/4” round head Philips screw (cc2) x 2 (2 screws for 1 door panel) to attach the door panel (J) to the face frame (D).
    

19. If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge
    

20. To reverse the door, unscrew the 3/4″ round head Philips screws from each hinge and remove the door panel. Then, reverse the door panel and drill the 3/4” round head Philips screws to each hinge through the pre-drilled holes to tighten the hinges with cabinet face frame.
    

21. Attach the rubber bumper (HH) to the top and bottom corner of the door panel (J).
    

22. 

MORE INFORMATION

To see a video of the assembly process and to get information on the suggested installation process scan here

SCAN HERE FOR VIDEO ASSEMBLY AND INSTALLATION INSTRUCTIONS

RELIABILT and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>