SOUNDPEATS SL-600 Space Wireless Headset Ear Headphones User Guide

: June 17, 2024
: SoundPEATS

Table of Contents

Space
- User Guide
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Space

WIRELESS HEADSET

SOUNDPEATS SL-600 Space Wireless Headset Ear Headphones
0

User Guide

Initial Setup

Power On/Off

Power On via Bluetooth: Long press the power button for 3 seconds, and you will hear a “Power on” voice prompt. The indicator light will stay blue for 1 second.
Power Off via Bluetooth: Long press the power button for 5 seconds, and you will hear a “Power off” voice prompt. The indicator light will flash red for 1 second before turning off.

Note: To prevent potential power button issues, it is recommended to wait for 2-3 seconds a er powering off before turning the product on again.

Bluetooth Pairing and Reset

When the headsets are turned off, long press the power button for about 5 seconds to enter pairing mode. You will hear a “Pairing” voice prompt, and the indicator light will flash red and blue alternately. The Bluetooth headsets can now be discovered by other devices.
After the initial connection, the headsets will automatically reconnect to the last connected device.
To switch devices or force pairing, simultaneously long press the “volume down” button and “volume up” button for 5 seconds. The indicator light will flash red and blue alternately 3 times, indicating that the headsets have forcibly disconnected from the current device and entered pairing mode. To reconnect to the original device, you will need to manually select it (pairing list is not cleared).
Reset: While the headsets are powered on and not in a call, simultaneously long press the power button and ANC button for 10 seconds, until the indicator light flashes red and blue alternately for 2 seconds. Reset is successful.

Noise Cancellation on (ANC ON) / Pass Through Mode / Noise Cancellation

Off (ANC OFF) Function Switch

Short-press the ANC button once to cycle among Pass through On mode, ANC ON and ANC OFF mode.

Note: When the headsets are powered on, not connected via Bluetooth, and ANC or Pass through Mode is enabled, the headsets will not automatically power off. You will need to manually power them off in this case (they will automatically power off after 5 minutes in normal mode).

Dual Device Connection

Follow the instructions on the card inside the package to download the SOUNDPEATS official app.
Open the SOUNDPEATS app and find the “Dual Device Connection” feature to enable it.
Follow these steps:

Pair the headsets with Device A first. After successful pairing, turn off the Bluetooth function on Device A.
Repeat the pairing process to connect the headsets with Device B. Keep the headsets connected to Device B.
Finally, turn on the Bluetooth function on Device A to use the “Dual Device Connection” feature.

Wired Mode

Insert the AUX audio cable, turn off the headphones (Bluetooth mode off), and enter a wired mode for audio transmission.
In wired mode, long-press the ANC button for 3 seconds to activate noise cancellation/pass-through mode (short-press the ANC button once to cycle between pass-through mode and noise cancellation mode). To deactivate pass-through mode and noise cancellation mode, long-press the ANC button for 3 seconds again.

Product Diagram

SOUNDPEATS SL-600 Space Wireless Headset Ear Headphones
2

Control

Play / Pause	Short press the power button once
Volume –	Short press the“volume-”button once
Volume +	Short press the “volume +” button once
The next track	Long press the “volume +” button for 1s
The previous track	Long press the “ volume – ” button for 1s
Answer / Hang up phone call	Short press the power button once
Reject phone call	Long press the power button for 1.5s
Switch between two calls	Short press the power button twice
Enter pairing mode manually	simultaneously long press the “ volume- ” button

and “volume +”button for 5s
Activate voice assistant| Short press the power button twice
Enter / Exit game mode| Triple short press the power button
ANC/Pass Through/Normal Modes switch| Short press the ANC button once

Wearing

Identify le and right earphones.
Rotate the headset and find the most comfortable position.

Headset Charging

When charging the headsets, the indicator light displays as follows:

Charging	The indicator light stays solid red.
Fully Charged	The indicator light turns off.

Note: When the headsets are plugged in for USB charging, they will automatically power off (Bluetooth function will be turned off). You cannot manually power them on during the charging process.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC ID

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.”
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Space

MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square,
Chuangye Road, Longhua District,
Shenzhen, China. 518109
support@soundpeats.com
www.soundpeats.com

FCC ID: 2AFTU-DD035 IC ID: 27785-YK007
MADE IN CHINA

Disposal B