FeiyuTech Vimble 4SE 3 Axis Gimbal Stabilizer for Smartphone User Guide

Feiyu Tech Vimble 4SE 3 Axis Gimbal Stabilizer for Smartphone

Overview

1. Roll axis
2. Cross arm
3. Tilt axis
4. Vertical arm
5. Pan axis
6. Trigger button (custom functions in App)
7. USB-C port for accessories
8. Limitation
9. Status/Battery indicator
10. Bluetooth indicator
11. Follow status indicator
12. Joystick
13. Dial
14. Dial function switching button
15. Album button
16. Shutter button
17. M button (custom functions in App)
18. Smartphone holder
19. Magnetizable nameplate
20. Power button
21. USB-C port
22. Handle (built-in battery)
23. 1/4 inch thread hole
24. Tripod
    

• This product dose NOT include smartphone.

Quick Experience

Step 1: Unfold and fold

Step 2: Smartphone Installation

It is recommended to remove the smartphone case before installation.

Keep the logo of the smartphone holder upward. Keep the smartphone holder in center.
If the smartphone tilted, please move the smartphone left or right to make it horizontal.

Step 3: Power ON/OFF/Standby

It is recommended to install your smartphone and balance gimbal before power on the gimbal.

Power ON/OFF: Long press the power button and release it when you hear the tone.
Enter standby mode: Double tap the power button to enter standby mode. Tap again to wake up.

Charging

Please fully charge the battery before power on the gimbal for the first time.

Connect the USB-C cable to charge.

Landscape & Portrait Mode Switching

Double click the M button or manually rotate the smartphone holder to switch between landscape and portrait mode.
Do not make anti-clockwise rotation in landscape mode, Do not make clockwise rotation in portrait mode.

Tripod

The tripod is attached to the bottom of the gimbal in a rotating manner. According to the needs of shooting, choose whether to install it.

Connection

Bluetooth Connection

Turn on the gimbal.
Method one: Download and install Feiyu ON App, run the App, follow the prompts to turn on and connect with the Bluetooth.

Method two: Turn on the smartphone Bluetooth, connect the gimbal Bluetooth in the setting of phone, e.g. FYVB4 XX.

If fail to find the Bluetooth:
Method one: Shut down the App in the background.
Method two: Move downward the joystick and triple tap the power button at the same time to reset the Bluetooth connection of gimbal. (And the Bluetooth can only be reconnected after reboot the gimbal)

App Connection
Download the Feiyu ON App
Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play.

• Requires iOS 12.0 or above, Android 8.0 or above.

|
---|---

iOS

|

Android

Common Operation

1. : VB 4SE can achieve those functions after balanced gimbal.
2.  : New available function which achieved after connected smartphone via Bluetooth with the functions in condition ① still available.
3.  : New available function which achieved via Feiyu ON App with the functions in condition ① , ② still available.

• Long press: power on
• Single tap: check battery level

Power on:

• Long press: power off
• Double tap: enter standby mode (tap again to wake up)

|

• Single tap: enter/quit shortcut menu in App

| | Switch the control object of dial:

• Single tap (tone: beep): When control zoom/focus: switch the control object of dial between focus/zoom (default) cyclically When control axes: switch the control object of dial among tilt/pan/roll (default) axis cyclically
• Long press (tone: beep beep): switch the dial between control axes/control focus and zoom (default)

| |

• Rotate: When control focus/zoom: control focus/zoom (default) When control axes: control the movement of the roll (default)/tilt/pan axis

| | Control the movement of the tilt and pan axes
|

• Select setting option
• After enter album: move to left to choose previous photo/video; move to right to choose next photo/video; move upward to play/pause; move downward to play/pause

| | When original camera App is in photo mode:

• Press half way: focus
• Single tap (fully): take photo

When original camera App is in video mode:

• Single tap (fully): start/stop recording

| In photo mode:

• Press half way: focus
• Single tap (fully): take photo

In video mode:

• Press half way: pause/continue recording
• Single tap (fully): start/stop recording

| |

• Single tap: switch among pan follow/ all follow/follow mode (default) cyclically
• Double tap: landscape and portrait mode switching

| Customize the function of single tap
| | Single tap: enter/exit album
| |

• Long press: lock mode (release it to exit)
• Double tap: reenter

| |

• Single tap: start AI face tracking
• Triple tap: switch front/rear camera
• Customize the function of single tap/long press

Indicator

Status/Battery indicator

Indicator while charging:

Indicator while using:

Bluetooth indicator

disconnected
Blue light keeps flashing quickly| Reset Bluetooth connection of gimbal

Follow status indicator

Figure: Light on Light of

Specifications

Product name: Feiyu VB 4SE 3-Axis Handheld Gimbal for Smartphone
Product model: FeiyuVB4SE
Max. Tilt Range: -20° ~ +35° (±3° )
Max. Roll Range: -60° ~ +60° (±3° )
Max. Pan Range: -80° ~ +185° (±3° )
Size: About 98.5×154×53.5mm (folded)
Net gimbal Weight: About 315g (not including tripod)
Battery: 1300mAh
Charging time: ≤ 3.5h
Battery Life: ≤ 9h (test in lab environment with 205g load)
Payload Capability: ≤ 260g (after balanced)
Adapter smartphones: iPhone & Android phones (the width of the phone ≤ 88mm )

Packing list:
Main body×1, Tripod×1, USB-C cable×1,
Portable bag×1, Manual×1

Notice:

1. Make sure motor spinning is not blocked by external force when the product is power on.
2. The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassembly the product except marked detachable. It need send to Feiyu Tech after-sales or authorized service center to fix it if you accidently  disassembly and cause abnormal work. The relevant costs are borne by user.
4. Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact Feiyu Tech after-sales support.

Storage and Maintenance:

1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days.
3. Please storage the product in dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core.
5. Never use the product when the temperature is too high or too low.

Official Social Media

| | | |
---|---|---|---|---
Website| Facebook| You tube| Twitter| Instagram

 **official media platform**

| | |
---|---|---|---

This document is subject to change without notice.

|
---|---
The latest user
manual|

Latest detailed description

FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CUSTOMER SUPPORT

Guilin Feiyu Technology Incorporated Company
www.feiyu-tech.com | support@feiyu- tech.com | +86 773-2320865

References

• FeiyuTech - Official Website
• 售后服务-飞宇稳定器
• After sales service--FeiyuTech

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>