Danfoss AB-PM DN 40-100 Differential Pressure Control Valves User Guide
- June 4, 2024
- Danfoss
Table of Contents
AB-PM DN 40-100 Differential Pressure Control Valves
User Guide
AB-PM DN 40-100 Differential Pressure Control Valves
Operating Guide
AB-PM DN 40-100 
Mounting of handle
Installation
Note: Best done before pressurizing the system
Setting: Flow %
| Factory setting | DN 40-100 |
|---|---|
| Δp setting | min. setting |
| Flow % | 100 |
DN| 65-100|
---|---|---
40-50| 50
65-100| 42
❹ Setting: Δp setting
Note: Best done before pressurizing the system
| n (turns) | Δp setting |
|---|---|
| 0 turns | Min. setting (factory setting) |
| … | … |
| 20 turns | Max. setting |
| n (turns) | Δp setting |
|---|---|
| 0 turns | Min. setting (factory setting) |
| … | … |
| 40 turns | Max. setting |
Manual shut-off
Clockwise: Close
Counter-Clockwise: Open
Measuring
Mounting actuator
IMI1OPTEP:
Danfoss A/S Climate Solutions
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on the selection of
the product, its application or use, product design, weight, dimensions,
capacity or any other technical data in product manuals, catalogs
descriptions, advertisements, etc., and whether made available in writing,
orally, electronically, online or via download, shall be considered
informative and is only binding if and to the extent, explicit reference is
made in a quotation or order confirmation. Danfoss cannot accept any
responsibility for possible errors in catalogs, brochures, videos, and other
material. Danfoss reserves the right to alter its products without notice.
This also applies to products ordered but not delivered provided that such
alterations can be made without changes to the form, fit, or function of the
product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.