Hongsheng Wang T2PRO Smart Wristband User Guide
- June 16, 2024
- Hongsheng Wang
Table of Contents
Hongsheng Wang T2PRO Smart Wristband User Guide
Product Information
Specifications
- Device Type: [Product Name]
- Model Number: [Model Number]
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 0cm
Product Usage Instructions
Cautionary Note
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Limits
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Installation and Operation
This equipment should be installed and operated with a minimum distance of 0cm
between the radiator and your body.
Wear it properly
The bracelet is best worn after the ulnar stvloid Adjust the size of the wrist
according to the adjustment hole; buckle the wrist strap buckle. The sensor
should be close to the skin to avoid moving
Charge the bracelet
Use it for the first time to ensure that the battery is in normal condition.
If the power is not turned on normally, please connect the charger to charge
the device.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app download and install the app.
System requirements: Android 5.0 and above; i0S9.0 and above; support for
Bluetooth4.0.
Device connection
- For the first use, you need to connect the APF’ for calibration. After the connection is successful, the bracelet will o1utomiltically synchronize the time.
- Turn on the Bluetooth switch of the mobile phone system ➔ enter the app device module settings ➔ click NBind device, experience more featuresN to enter, it will automatically search for nearby Bluetooth devices on the bracelet:T2PRO, find and connect the bracelet device.
- After the pairing is successful, the APP will pop up a guide page. According to the instructions, jump to the mobile phone system Bluetooth search to find the WellAudio device and connect it. After the connection is successful, you can make / receive calls and listen to music {Note: If the mobile phone system Bluetooth has not been searched WellAudio equipment, please enter the Dual mode menu and set it to On, you cannot make calls without connecting the WellAudio equipment.)
- APP will automatically save the Bluetooth address of the bracelet, and the APP will open and run in the background, and will automatically search and connect the bracelet;
- Android phones use all notification permissions to read contact information and give the app background running in the phone settings.
Bracelet function description
- Slide up the standby page to enter the notification reminder, and slide down to enter the control center Swipe left or right on the standby page to cycle through the dials
- Long press Up key 2seconds on any dial page to start the language assistant. (Remarks: The mobile phone also needs to be connected to the WellAudio device, and the smart phone needs to set the user’s voice in cdvance in the voice menu)
- Click the screen on the standby page to enter the main menu, the style of the main menu can be switched
- Bracelet reset device This function will clear all data of the bracelet (such as step counting)
- Switch to the hecrt rcte three-in-one interface to start the test, hecrt rate three-in-one interface 60s timeout automatically off screen (heart rate and blood pressure need bracelet hardware support).
- On the button to enter the UI MENU and return functions, in the dial interface ontwokeysto enteralipay,in theUiMenu lnterface ontwokeysto switchstyle menu, the next key long press switch, click on the light off screen.
Clock interface
After synchronizing with the phone, the bracelet will cutomatically calibrate
the time;
Swipe left or right on the standby page to cycle through the dials
Step
Number of 51:eps
Wear the bracelet and record the number of daily movement steps to view the
current real-time steps.
di5tance
The distance of motion is estimated based on the number of walking steps.
Calories
Estimate the calories burned based on the number of walking steps
Heart rate, blood pressure, blood oxygen three-In-one
After entering the heart rate three-in-one test interface for a few seconds,
the current heart rate, blood pressure, and blood oxygen test results are
displayed. This feature requires a wristband to support heart rate and blood
pressure
dial
Dial pad for making calls (note: the phone also needs to be connected to a
WellAudiodevice)
phone book
Add 8 commonly used contacts in the APP. After the bracelet is successfully
connected with the APP Bluetooth, the contacts can be displayed in the
bracelet phone book. aick the contact to make a call (Note: The phone needs to
be connected to a WellAudio device)
Music control
The bracelet can control the previous song and the next song, and pause/ start
playback. (Note: WellAudio devices need to be connected to use this feature
phone)
Dual mode switch
This switch needs to be turned on for the phone to search for the WellAudio
device. If the phone is not connected to the WellAudio device within 5 minutes
after the bracelet is turned on, the switch will be turned off automatically,
and it needs to be turned on manually when it is used again. (Note: If the
WellAudio function is not used within 5 minutes after connecting to the
WellAudio device, it will automatically turn off. The call, play music,
phonebook, and voice wake-up functions can be directly activated and used)
exercise more
All sports modes can record the calories and duration of skipping rope.
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode; automatically detect your deep sleep/ light sleep/ wake up
all night, calculate your sleep quality; the wristband only shows the total
length of deep sleep/ light sleep/ sleep, APP end can View sleep data details.
Note: Sleep data will be available when you wear your wristband and sleep will
be detected from 10:00 pm. Sleeping data for 3/4 hours can be synchronized to
the app while sleeping.
Information mode
Information menu can view the latest news content
Stopwatch function
Enter the stopwatch and click the start button to start timing, click the
pause button to stop, and click the reset button to clear the timing.
Customdlal
You need to connect to the APP to get the dial settings, you can choose the
recommended dial/default dial/album custom dial to synchronize to the
bracelet.
NFC access control
NFC access control, the need for an administrator to authorize the entry of a
new access control, the watch on the Smart Lock Sensor area, showing that the
entry is successful,youcan use the watch to unlock.
All pay features
Offline payment function, the drop-down menu to click the a Ii pay icon,
according to the corresponding steps to bind alipay Qr code, prompt binding
successful, you can quickly offllne payment function.
APP function and settings
Personal information
Please set your personal information after entering the app. Settings ➔
Personal Information, you can set gender – age height weight – distance You
can also set your daily goal steps to monitor daily completions.
Application push
SMS notification:
In the connected state, if the SMS reminder function is enabled, the bracelet
will vibrate when there is a text message.
Other reminders:
In the connected state, if this function is enabled, when there are messages
such as WeChat, QQ, Facebook, etc., the bracelet will vibrate to remind and
display the content received by the app (You need to give the APP permission
to get system notifications, and the wristband can dlsplay 2D-40 words).
Note : Incoming rail reminder system is enabled by default, no switch
option (calls for incoming calls need to be connected to WellAudio device)
Other functions:
Turn on the vibration setting function, when there are calls, messages or
other reminders, the bracelet will vibrate. If it is off, the bracelet will
only have a screen reminder without shaking to avoid interruption.
Tips for Android user5:
When using the reminder function, you need to set it to allow “FitPro” to run
in the background; it is recommended to add “FitPro” to the rights management
and open all permissions.
Alarm setting
In the connected state, 8 alarms can be set. After setting, It will be
synchronized to the bracelet; offllne alarm Is supported. After the
synchronization is successful, even if the APP is not connected, the bracelet
will be reminded according to the set time.
Looking for a bracelet
In the connected state, click the NLook for the braceler option and the
bracelet will vibrate.
Remote photography
In the connected state, start the photo from the wristband or the APP to enter
the remote camera interface, shake/turn the wrist/touch the bracelet, and
automatically take a photo after 3 seconds of counting down. Please allow the
APP to access the photo album to save the self-portrait photo.
Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the
reminder interval, if you sit for a long time in the set time, the bracelet
will remind you.
Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen, lift
yourwrist andturnthescreento yourself tolightup thescreen.
Do not disturb mode
Turn on the Do Not Disturb mode. You can set the Do not disturb time period.
During the set time period, the bracelet stops receiving notification messages
to avoid reminding messages.
Device reset
Setting this feature reset will erase all data in the bracelet (such as step
counting)
Remove device
Remove device This feature will erase data and remove device
Basic parameters
Precautions
- Bathing and swimming should not be worn.
- Pleaseconnectthe braceletwhen synchronizingdata.
- Use the Included charging cable to charge.
- Do not expose the handle ring to moisture for a long time, where the temperature is extremely high or extremely low.
- The flashover of the wristband restarts. Please check the memory information of the mobile phone to dear it and try again, or exit the APP and reopen it.
Component introduction
- Host
- Wrist strap
- Charging cable
- Packing box and manual
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterferenc e to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or reloca te the receiving antenna.
- Increase the separation between the equipm ent and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
FAQ (Frequently Asked Questions)
Q: What should I do if I want to make changes or modifications to the
device?
A: Any changes or modifications to the device not explicitly approved by the
manufacturer could void your authority to operate this equipment. It is
recommended to contact the manufacturer for guidance on any modifications.
Q: What is FCC Part 15 compliance?
A: FCC Part 15 is a set of regulations established by the Federal
Communications Commission (FCC) in the United States. Compliance with Part 15
ensures that the device operates within acceptable limits of electromagnetic
interference.
Q: What are the FCC radiation exposure limits?
A: The FCC sets radiation exposure limits to protect individuals from
excessive exposure to electromagnetic radiation emitted by electronic devices.
This equipment complies with these limits, ensuring safe usage.
Q: Can I install and operate the device close to my body?
A: No, it is recommended to maintain a minimum distance of 0cm between the
radiator of the device and your body during installation and operation to
comply with safety guidelines.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>