SNZGD12 Refrigeration Avantco Flat Glass Sneeze Instruction Manual
- June 17, 2024
- AVANTCO
Table of Contents
SNZGD12 Refrigeration Avantco Flat Glass Sneeze
Specifications
- Model: Sneeze Guard
- Dimensions: Standard size
- Material: Durable plastic
- Color: Clear
Product Usage Instructions
Assembly Instructions
- Install Left and Right Brackets:
- Remove the plug from the installation hole on the top board.
- Install the left and right brackets of the sneeze guard using 8 M6x12mm screws.
- Install Top Bracket:
- Place the top bracket on the left and right brackets.
- Install Sneeze Guard:
- Place the sneeze guard at the top and align the installation holes.
- In each of the four installation holes, install screws from top to bottom and screw in nuts at the bottom.
- Do not tighten the screws at this time, wait for the next step.
- Install Sideboards for Sneeze Guard:
- Install the sneeze guard sideboards on the installation.
- Install Connection Blocks:
- Connect the four corners of the sneeze guard using connection blocks.
FAQ
Q: How do I clean the sneeze guard?
- A: Use a mild soap solution and a soft cloth to clean the sneeze guard. Avoid using abrasive cleaners or rough materials that may scratch the surface.
Q: Can I customize the size of the sneeze guard?
- A: The sneeze guard comes in a standard size, but you may contact customer support for any customization inquiries.
Parts List
Assembly Instructions
- Install Left and Right Brackets
- A. Remove the plug from the installation hole on the top board.
- B. Install the left and right brackets of the sneeze guard in sequence as the positions shown in the figure to the right, and tighten the 8 screws connected to the top board. Parts needed:
- Left and right bracket of sneeze guard: 2 pcs
- M6x12mm cross recessed large flat head machine thread screw: 8pcs
- Install Top Bracket
- A. Place the top bracket on the left and right brackets and align the installation holes.
- Parts needed:
- Top bracket: 1 pcs
- Install Sneeze Guard
- A. Place the sneeze guard at the top and align the installation holes.
- B. In each of the four installation holes, install screws from top to bottom and screw in nuts at the bottom.
- C. Do not tighten the screws at this time, wait for the next step to align and install before fully tightening.
- Parts needed:
- Sneeze guard: 1 pcs
- M6x12mm cross recessed large flat head machine thread screw: 4pcs
- M6 Cap nut: 4 pcs
- Install Sideboards for Sneeze Guard
- A. Install the sneeze guard sideboards on the installation holes of the left and right brackets.
- During installation, be sure to align the sneeze guard correctly and fully tighten all screws.
- Parts needed:
- Sideboards for sneeze guard: 2 pcs
- M6x12mm cross recessed large flat head machine thread screw: 8pcs
- M6 Cap nut: 8 pcs
- Install Connection Blocks
- A. Connect the four corners of the sneeze guard to the sneeze guard side boards using connection blocks and secure it with screws and nuts.
- Parts needed:
- Connection blocks: 4 pcs
- M6x12mm cross recessed large flat head machine thread screw: 8pcs
- Cap nut: 8 pcs
Documents / Resources
|
AVANTCO SNZGD12 Refrigeration Avantco Flat Glass
Sneeze
[pdf] Instruction Manual
SNZGD12 Refrigeration Avantco Flat Glass Sneeze, SNZGD12, Refrigeration
Avantco Flat Glass Sneeze, Avantco Flat Glass Sneeze, Flat Glass Sneeze, Glass
Sneeze, Sneeze
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>