RETEYUNG AJ221 Cell Phone Stand with Wireless Bluetooth Speaker Instructions
- June 17, 2024
- RETEYUNG
Table of Contents
Phone Stand Wireless Speaker
Please
read carefully before use
Product Information
- Mobile phone stents, small and portable, easy to store
- Colorful atmosphere light,5 kinds of light effects with the music rhythm flashing
- Wireless speaker
- Hands-free calling
- More portable for outdoor to use with built-in high-capacity rechargeable lithium battery
- Low battery warning, power off after three times
Technical Parameters
| Wireless Version | V5.1 | Distortion Rate | ≤10% |
|---|---|---|---|
| Wireless Name | AJ221 | Output Power | 54W |
| Transmission Distance | ≥10m | SNR | 80dB |
| Frequency Response | 80Hz-20kHz | Color light Power | 1W |
| Horn Parameters | Φ52mm4Ω5W | Power Supply | 5V 0.8A |
| Built-in Lithium Battery | 3.7V/2000mAh | Product Size | 131x80x43mm |
Answer The Telephone
- When the phone is connected to the wireless speaker, you can double press the button to reject the call when there is an incoming call.
- When there is an incoming call, short press the button to answer it. After the call is over, short press the button to end the call.
- Double press the button to dial the last call.
Speaker Operation
- Long press the button to turn on speaker and with a beep. The atmosphere light on,search wireless name” AJ221″ on the phone.After the connection is successful,there will be a beep.
- Long press the button to switch to the previous song,short press to lower the volume.
- Long press the button to next song,short press to increase the volume.When the volume reaches the maximum,there will be a beep.
- Hold down the and button at the same time to cancel pairing with your phone.
- Short press the button to pause or resume playing.
- In this process, you can switch the mode of the atmosphere light and turn the light on and off by the button.
- Short press the button to switch other lighting mode.
- Long press the button to turn the light off or on again.
(The light can only be turned on after the speaker is turned on.)
Charging Instruction
Plug the Type-C cable into the USB port for charging,the red light will be on when charging,and it will go out when fully charged.
Attention:
- Please don’t charge the speaker under the temperature of 0°(-40°C.
- Not recommended for charging while using.
- Please pull out the USB cable after a full charge.
- Please don’t charge the speaker in high-humidity situation.
Support development
Warranty Card
Applicable for
- Since buying date, the user enjoys one year free repair services under normal use. After one year,will be charged according to each component part cost.
- In case change component part, will be charged according to our company’s component part cost list.
- The following situations without free repair services in warranty period
- Damage caused by natural earthquake, rat disaster, and abnormal use.
- Damage caused in transportation, fall, and improper storage.
- Consumable component, such as spare parts, batteries, light bulbs,etc.
- Warranty information records s not complete, no purchase date, no buying shop seal,etc.
- Featured using environment, such as humidity, sulfur area, high salty and on board,etc,easy corrosion area.
- Using not according to the nstructions.
- Products sold by special agreement.
- When return to factory for repair, the user should make sure the product packed property to avoid any damage during transportation.
- Factory not responsible for the damages caused by the users themselves improper disassemble.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>