PXN V3PRO Gaming Racing Steering Wheel User Manual

V3PRO User Manual

System Requirements

Compatible Platforms PC, PS3, PS4, XBOX ONE, XBOX SERIES X&S, SWITCH
System Requirement on PC Windows 7 / 8 / 10 / 11

Product Overview

Clamp Installation

The steering wheel is equipped with a screw staff and U – type clamp, which can be directly installed on a desk.
Step 1 Please take out the screw staff and U – type clamp. Step 2 Install the screw staff into the U – type clamp. Step 3 Then clip the U – type clamp to the steering wheel, as shows above. Step 4 Install the steering wheel to the desk, then tighten the screw staff.

Connect with PC

Step 1 Plug the USB cable of steering wheel into computer. Mode indicator will remain ON when connection is successful.
Step 2 The steering wheel is X-input mode in default after connection. Hold and press the HOME button to change working mode to D-input.
Step 3 Easily change corresponding working modes when playing different games. X -input Mode
X -input working mode is suitable for games ported from Xbox 360 to PC and it is plug and play.
Recommended games are Need for Speed 13 (or versions above ), Dirty 2/3, Ridge Racing etc
D -input Mode
D -input working mode is suitable for early single-player racing games.
Recommended games are Need for Speed 1-12, Euro Truck Simulator 2 etc.

Function Testing on PC

Function inspection of steering wheel is available when connecting with PC, the specific steps show as below：
Open Control Panel → Device and Printer → Right mouse click gamepad icon → Game Controller Setting, click Properties Testing .

Connect with PS3

Step 1 Plug the USB cable of steering wheel into PS3 and power on PS3 console.
Step 2 Corresponding channel indicator will remain ON when steering wheel is connected successfully with console, then can enter the games to play or set the related functions on console .

Connect with PS4

Step 1 Power OFF the original PS4 controller before connection.
Step 2 Use a Micro USB cable to connect PS4 original controller and the guidance port in the steering wheel.
Step 3 Plug the USB cable of steering wheel into PS4.
Step 4 Press HOME button on steering wheel, red indicator will remain ON when connection is successful.

Connect with XBOX ONE/XBOX SERIES X&S

Step 1 Power OFF the original controller of XBOX ONE /XBOX SERIES X&S
Step 2 Use a Micro USB cable to connect XBOX ONE /XBOX SERIES X&S original controller and the guidance port in the steering wheel.
Step 3 Plug the USB cable of steering wheel into XBOX ONE /XBOX SERIES X&S.
Step 4 Press HOME button on steering wheel, red indicator will remain ON when connection is successful.

Connect with SWITCH

• Enter Homepage of SWITCH, Select Setting Controllers and Sensors select Pro Controller Wired Connection. Please make sure that the option state is ON.

Connect with SWITCH Console
Step 1 Connect the Type-C OTG and the USB cable of steering wheel.
Step 2 Then plug the Type-C Adapter to SWITCH console.
Step 3 Red mode indicator will remain ON when connection is successful.
( Note : Type-C OTG Adapter is not included ) Connect with SWITCH Dock
Step 1 Put the SWITCH console into the SWITCH dock and ensure successful connection.
Step 2 Plug the USB cable of steering wheel into SWITCH dock and power on SWITCH console.
Step 3 Red mode indicator will remain ON when connection is successful.

Programming Settings

• Original button function can be replaced under programming setting
  Programming Buttons : L-paddle, R-paddle, L-pedal, R-pedal, L3, R3, Shifter
  Programming Available Buttons : A, B, X, Y, L1, L2, R1, R2
  How to program?
  Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, release the buttons when green programming indicator remains ON.
  Step 2 Press the programming button, and the programming indicator will flash in green.
  Step 3 Press a programming available button, setting is completed when green programming indicator is OFF.
  Clear Programming Setting
  Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, release the buttons when green programming indicator remains ON.
  Step 2 Press programming button, and the programming indicator will flash in green.
  Step 3 Press programming button again, then green programming indicator will turn OFF, function clearing is completed.
  Step 4 Replug and reconnect steering wheel, all settings will be cleared automatically.
  How to set pedals as Y axis?
  Step 1 Press SHARE + OPTIONS simultaneously for 3 seconds, green programming indicator remains ON.
  Step 2 Press left button of D-pad, setting is successful when green indicator is OFF.

Sensitivity Adjustment

3 Levels of Sensitivity Adjustments

Step 1 Press SHARE + OPTIONS for 3 seconds, green programming indicator ramains ON.
Step 2 Adjust Sensitivity : Press SHARE button to adjust sensitivity – Medium, High, Low for choices. ( Defaulted sensitivity level is medium )
Step 3 Save Setting : Press D-pad UP [ ] button to save settings, programming indicator remains OFF.

Attention

• Avoid strong vibration, do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the steering wheel to avoid damage.
• Avoid storing in humid, high temperature, oily smoke and other places.
• Please handle gently when connect or remove the steering wheel.
• Children should be under adult’s supervision at all times when using this product.

Product Specifications

“ ” is a registered trademark of ShenZhen PXN Electronics Technology Co., Ltd
PS4/PS3 is a registered trademark of Sony Computer Entertainment Inc.
Xbox is a registered trademark of Microsoft Corporation.
SWITCH is a registered trademark of Nintendo Co., Ltd.
All trademarks are the property of their respective owner. Technical specifications are subject to change. Information contained herein is subject to change without prior notice. ShenZhen
PXN Electronics Technology Co., Ltd. shall not be made liable for any errors that may appear.
Please keep this information for later reference.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>