HOLLYLAND Lark M2 Wireless Lavalier Microphone User Manual
- June 17, 2024
- HOLLYLAND
Table of Contents
HOLLYLAND Lark M2 Wireless Lavalier Microphone
Product Information
Specifications
- Model: LARK M2
- Version: Mobile and Camera
- Volume Adjustment: Mobile version – through the APP (iOS version supports 3-level adjustments, Android version supports 6-level adjustments); Camera version – through the knob on the RX (clockwise to increase volume, counterclockwise to decrease volume)
- Pairing Mode: Mobile version – TX (long press side yellow button for 6 seconds), RX (long press bottom yellow button for 3 seconds); Camera version – TX (long press side yellow button for 6 seconds), RX (press and hold M button on lower left side for 3 seconds)
- Upgrade Method: Mobile version – via the LarkSound APP; Camera version – via computer’s host software after proper pairing
- Charging: Camera version RX – LED stays solid orange when not fully charged (requires an upgrade to V2.1.0.23 to fix charging logic bug)
FAQ
Operations FAQ
-
How to turn on LARK M2’s ENC function？
- Mobile version: tap the yellow button on the side of the TX, or tap the yellow button at the bottom of the RX.
- Camera version: tap the yellow button on the side of the TX.
-
How to pair？
- Mobile version：
- For TX, long press the side yellow button for 6 seconds when the power is off to enter pairing mode (quickly flashing blue light);
- For RX, long press the bottom yellow button for 3 seconds to enter pairing mode (quickly flashing blue light);
- TX and RX need to enter the pairing mode at the same time. Steady blue light indicates pairing is successful.
- Camera version
- For TX, long press the side yellow button for 6 seconds when the power is off to enter pairing mode (quickly flashing blue light);
- For RX, press and hold the M button on the lower left side for 3 seconds to enter pairing mode;
- TX and RX need to enter the pairing mode at the same time. Steady blue light indicates pairing is successful
-
How to upgrade？
-
Mobile version
-
A: The mobile version can be upgraded via the LarkSound APP.
-
Camera version
A: The camera version is upgraded via the computer’s host software after pairing TX and RX properly. -
Connect the RX to your computer using the provided USB cable；
-
Open the host software on your computer, and the software will automatically identify the microphone driver. Once identification is successful, click on “upgrade”；
-
During the upgrade process, the LED on TX and TX will display a steady pink light. Wait for the progress bar on the host computer to complete. When finished, the LED on TX and RX will return to the former color, indicating a successful upgrade.
-
-
How to adjust the voice volume？
- A: The camera version adjusts the output volume through the knob on the RX. Turn clockwise to turn the volume up and counterclockwise to turn the volume down. The 3 LEDs below show the current volume level. The mobile version adjusts the output volume through the APP. The iOS version of the APP supports 3-level adjustments while the Android version supports 6-level adjustments.
General FAQ
- The camera version RX cannot be fully charged and the LED stays solid orange?
- A: This is a charging logic bug. The latest version has been optimized to address this problem. Upgrading to V2.1.0.23 can solve it.
- When the LARK M2 camera version is connected to the VenusLiv Camera, only one microphone has sound.
- A: When the RX is connected to the VenusLiv Camera via a 3.5mm TRS to TRS cable, you need to switch to mono mode for audio reception. Just press the M button on the side of the RX, and the LED below will switch to a steady green light.
- There are no “Strong” and “Weak” options in the LarkSound App
- 1A: You need to turn on the ENC function first and then select strong or weak noise cancellation in the App
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>