Milesight A91 TrafficX Camera User Guide

Milesight A91 TrafficX Camera

Product Information

Specifications

• TrafficX Camera
• Power Cable x 1
• Multi-functional Interface Cable x 1
• Terminal x 2
• Screwdriver x 1 (Only applicable for the back cover screws)
• Safety Latch x 1
• Quick Start Guide x 1
• Warranty Card x 1
• Optional Bracket: A91 Pedestal Mount x 1
• Optional Bracket: Bracket-to-Gantry Screw Packet x 1
• Optional Bracket: A92 Wall Mount x 1
• Optional Power Adapter: Power Supply Adapter x 1
• Lens
• RJ45 Photosensitive and Indicator Lights
• GPS Antenna
• IR Strobe Light (16 light beads)
• Pedestal Mount
• Micro SD
• SIM
• Multi-functional Interface
• DC/AC 24V
• SIM Card (Only for the camera that includes the 4G module)
• SD Card

Product Usage Instructions

Step 1: Inserting SD card and SIM card

• Use a screwdriver to open the back cover at the bottom of the camera.
• Insert the SD card and SIM card. Close the back cover and tighten the screws securely.

Note:

• Only cameras that include a 4G module require the insertion of a SIM card.

Step 2: Installation of the Pedestal Mount

1. Loosen the screws on both sides of the bracket as shown in the diagram, and the bracket will be able to rotate.
2. Align the center hole of the mounting bracket with the center hole on the bottom of the camera, insert the screws, and tighten them to secure it.
3. After resetting the bracket, tighten the bracket screws.
4. Place the assembled camera with the bracket onto the gantry.
   • Use screws to secure the bracket to the gantry.
5. To adjust the camera angle, loosen the screws indicated on the bracket as shown in the diagram.
   • The bracket can then be rotated for adjustment.
   • Once it is properly adjusted, tighten the screws to secure the bracket in place.

Step 3: Installation of the Wall Mount Bracket

1. Loosen the screws on both sides of the bracket as shown in the diagram, and the bracket will be able to rotate.
2. Align the center hole of the wall mount bracket with the center hole on the bottom of the camera, insert the screws, and tighten them to secure it.
3. According to the instructions on the perforation-assisted stickers, punch holes at the corresponding installation positions on the vertical plane.

FAQ

1. Do I need to insert a SIM card?
   • Only cameras that include a 4G module require the insertion of a SIM card.
2. How do I adjust the camera angle?
   • To adjust the camera angle, loosen the screws indicated on the bracket, rotate the bracket for adjustment, and then tighten the screws to secure the bracket in place.

Package Contents

Optional Bracket

Optional Bracket

Optional Power Adapter

Hardware Overview

Dimensions

Installation

Note:

1. If the installation environment is column-style, it is recommended to purchase the A01 Pole Mount auxiliary bracket for use.
2. Please ensure that the camera is installed in the center position, and it is not recommended to adjust or tilt it towards the left or right direction.

• Step 1: Use a screwdriver to open the back cover at the bottom of the camera.
• Insert the SD card and SIM card. Close the back cover and tighten the screws securely.
• Note: Only cameras that include a 4G module require the insertion of a SIM card.

Tips:

1. If necessary, loosen the screws on the rain cover to adjust it to the appropriate position.
2. The safety latch in the packaging can be used to connect the camera and secure parts together before installation, preventing them from falling off.

Installation of the Pedestal Mount

• Step 2: Loosen the screws on both sides of the bracket as shown in the diagram, and the bracket will be able to rotate.
• Align the center hole of the mounting bracket with the center hole on the bottom of the camera, insert the screws, and tighten them to secure it.
• After resetting the bracket, tighten the bracket screws.
• Step 3: Place the assembled camera with the bracket onto the gantry.
• Use screws to secure the bracket to the gantry
• Step 4: To adjust the camera angle, loosen the screws indicated on the bracket as shown in the diagram.
• The bracket can then be rotated for adjustment.
• Once it is properly adjusted, tighten the screws to secure the bracket in place.

Installation of the Wall Mount Bracket

• Step 2 : Loosen the screws on both sides of the bracket as shown in the diagram, and the bracket will be able to rotate.
• Align the center hole of the wall mount bracket with the center hole on the bottom of the camera, insert the screws, and tighten them to secure it.
• After resetting the bracket, tighten the bracket screws.
• Step 3: According to the instructions on the perforation-assisted stickers, punch holes at the corresponding installation positions on the vertical plane.

Note:

1. Inspect the condition of the installation surface to ensure sufficient support and strength, avoiding wall detachment or collapse.
2. Before drilling, please ensure to carefully review the hole instructions on the sticker. The diameter of the three screw holes should be Φ8mm to ensure a secure installation.
   • The hole intended for cable passage should have a diameter of Φ26mm to facilitate smooth wiring without any tension or interference.

• Step 4: Align the bracket with the screw holes on the surface, and secure the camera bracket using screws.
• Step 5: To adjust the camera angle, loosen the screws indicated on the bracket as shown in the diagram.
• The bracket can then be rotated for adjustment.
• Once it is properly adjusted, tighten the screws to secure the bracket in place.
• The screws in the bracket section can be adjusted to rotate up and down.
• The large screw at the bottom can be adjusted to rotate left and right.

Cable Connection

• Step 1: Unscrew the protective cover at the indicated position on the camera, remove the protective covers from the two tail wires, connect them to their respective positions, and tighten the threaded connectors.

Note: The output options of the multi-functional cables

To connect the power cable to the power adapter, follow these steps:

1. The power cable has 4 connectors: red and white cable connectors, as well as black and blue cable connectors.
2. Use one terminal with 3 holes to connect the red and white power cables.
   • There is an additional hole for connecting the positive power supply wire of the adapter.
3. Use the other terminal to connect the black and blue power cables. Another hole is designated for connecting the negative power supply wire of the adapter.

• Step 2: Remove the waterproof protective cover of the RJ45 interface and take out the rubber ring.
• Use an Ethernet cable to connect the following two in sequence.
• Step 3: Insert the Ethernet port into the interface and tighten the waterproof protective cover.

Assigning an IP Address by Using Smart Tools

• Smart Tools is a software tool that can automatically detect multiple online Milesight network cameras in the LAN, set IP addresses, and manage firmware upgrades. It’s recommended to use when assigning IP addresses for multiple cameras.

The steps to change the IP of cameras are as below:

1. Start Smart Tools, click the IPC Tools page, then enter the device information, such as IP address, MAC address, Port number, Netmask, and Gateway, and then all related Milesight network cameras in the same network that will be shown.
2. Select a camera or multiple cameras according to the MAC addresses.
3. Click “Activate” to set the password when using the cameras for the first time (Password must be 8 to 32 characters long, and contain at least one number and one letter), and set three security questions (If you forget the password, you can reset the password by answering three security questions correctly).
4. Type the user name and password you set, change the IP address or other network values, and then click the “Modify” button.
5. By double-clicking the selected camera or the browser of an interested camera, you can access the camera via the web browser directly.
   For more usage of Smart Tools, please refer to the “Smart Tools User Manual”.

Assigning an IP Address via Browser

If the network segment of the computer and that of the camera are different, please add some 192.168.5.xx(255.255.255.0) for your PC to get access to your cameras, more details can be found on “Milesight Network Camera Quick Start”.

Accessing from the Web Browser

• The camera can be used with most standard operating systems and browsers.
• The recommended browsers are Firefox, Chrome, and Safari.
• For more information about the plugin installation, please refer to the troubleshooting:
• Milesight-Troubleshooting-Plugin Installation on Windows-IPC
• Milesight-Troubleshooting-Plugin Installation on MAC

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

• www.milesight.com
• All Software & files can be downloaded from https://www.milesight.com/support/download

Documents / Resources

| Milesight A91 TrafficX Camera [pdf] User Guide
A91 TrafficX Camera, A91, TrafficX Camera, Camera
---|---

References

• Milesight | 5G, AI, IoT and LoRaWAN®
• Download Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>