nolon Nova Isa Dining Room Chair Instruction Manual
- June 16, 2024
- nolon
Table of Contents
nolon Nova Isa Dining Room Chair
THANK YOU FOR CHOOSING NOLON
nolon is a unique concept: we do not offer ready-made chairs and bar stools, but supply individual parts, so you can put together your ideal piece of furniture!
To summarize: all our nolon chairs fit to all our nolon bases. That is why we
provide detailed assembly instructions.
Method: We start with the base and add one of our seats. Not all chairs
require the same mounting parts to assemble to the base. If you have opted for
a Nova base, we will first explain how to assemble the Nova base. An overview
of the seats and the matching mounting sets, which may vary (sets C or E).
Additionally followed by a clear explanation of how to mount the seat on the
base.
If you need help, watch our online installation videos. If not clear, do not
hesitate to contact our customer service. We are happy to help you.
ASSEMBLY NOVA BASE
Assemble the two legs B with washers D and F with screw E to
the metal black frame A.
Place this on the side marked with sticker
B. Do not tighten the screw completely, but only 80%.
Then assemble the two legs C with washers D and F with screw E to the metal
black frame
A. Place them on the side marked with sticker
C. Do not tighten the screw completely, but only 80%. Fit the felt under
the legs.
Caution! Please note that it may be necessary to fit or replace
protective caps on the chair legs to prevent damage to the floor.
|
Vloerbescherming nodig?
Scan de QR-code
Do you need floor protection?
Scan the QR-code
ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT
-
Plastic chair.
-
Plastic chair with upholstered seat pad.
-
Plastic armchair.
-
Plastic armchair with upholstered seat pad.
-
Upholstered armchair.
Install the base on the seat as shown in the image above. Tighten the screws
to 80%.
Make sure that the arrow on the base points to the front of the seat.
|
Hulp nodig bij de montage?
Scan de QR-code
Need help with the
assembly? Scan the QR-cod
| 
---|---|---
-
Upholstered armchair.
-
Upholstered chair.
-
Upholstered armchair.
-
Upholstered armchair.
-
Upholstered chair.
Install the base on the seat as shown in the image above. Tighten the screws
to 80%.
Make sure that the arrow on the base points to the front of the seat.
|
Hulp nodig bij de montage?
Scan de QR-code
Need help with the
assembly? Scan the QR-code
LAST STEP OF THE ASSEMBLY
Finally, turn the chair over and place the entire chair on a flat surface.
Place approximately 60 kg of weight on the seat so that all legs are on the
ground and then tighten all screws to 100%.
|
Vloerbescherming nodig?
Scan de QR-code
Do you need floor protection?
Scan the QR-code
| 
---|---|---
|
Scan de QR-code voor
onderhouds instructies
Scan the QR-code for the care instructions
| 
CARE INSTRUCTIONS
Below you will find some maintenance tips and tricks so you can enjoy your new chair to the fullest.
Metal
Over time, metal tent to rust if it has come into contact with water and
moisture. The metal frames of nolon chairs have a special coating that
prevents rust formation. Therefore, it is very important not to damage or
scratch this coating (outer layer of the frame). The metal frames can be
cleaned with a soft cloth and soapy water. Do not use too much water and
always dry the surface afterwards
Wood
Wood is a natural material that changes color under the influence of UV
radiation. To avoid major color differences, it is important that all
furniture is exposed to the same amount of sunlight.
Temperature and humidity can also damage wood. For daily maintenance, you can
use a dry microfiber cloth to dust wood. Stains can be removed with a soft
cloth and soapy water. Do not use too much water and always dry the surface
afterwards.
Fabric upholstery
All fabrics can discolour due to UV radiation, so make sure that the chairs
are not exposed to direct sunlight. Treat the fabric with a protective spray
before use to prevent stains. Test the spray in advance on an invisible
surface. Remove moisture or stains immediately using only a damp or special
textile cleaner. Avoid harsh rubbing and the use of chemicals and alcohol
should be avoided.
Lint from the textile may appear on the surface, but this is completely normal
and will not return after a few removals. When fabric seats are removed from
the box, pressure points may be visible in the fabric. These should disappear
within a few days.
Plastic
Plastic material is easy to clean and maintain. A plastic seat does not need
to be treated before use. Stains can be removed with a soft cloth and mild
detergent.
Floor protection
nolon hairs are equipped with standard floor caps, but these do not provide
sufficient protection for all types of floors. That is why nolon has designed
special floor caps for each chair frame, so that each floor is properly
protected. Scan the QR code for more information and additional products on
the nolon website.
Customer Support
nolon
Vlotbrugweg 9
1332 AE Almere NL
www.nolon.nl
info@nolon.nl
036 799 80 25
|
Vloerbescherming nodig?
Scan de QR-code
Do you need floor protection?
Scan the QR-code
|
---|---|---
|
Scan de QR-code voor
onderhouds instructies
Scan the QR-code for the care instructions
|
Documents / Resources
|
nolon Nova Isa Dining Room
Chair
[pdf] Instruction Manual
Nova-Otis, Nova Isa Dining Room Chair, Nova, Isa Dining Room Chair, Dining
Room Chair, Room Chair, Chair
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>