nolon Nora Mae Dining Room Chair Instruction Manual
- June 16, 2024
- nolon
Table of Contents
nolon Nora Mae Dining Room Chair
Specifications
- Product Name: Nora
- Model Number: NOL.NORA-MANUAL
- Concept: Nolon offers individual parts for customizable chairs and bar stools
- Compatibility: All Nolon chairs fit all Nolon bases
Assembly Instructions
To assemble the Nora chair, follow these steps:
Step 1: Base Assembly
- Start with the Nora base.
- Refer to the assembly instruction manual for detailed
instructions on how to assemble the Nora base.
Step 2: Seat Assembly
Not all chairs require the same mounting parts. Depending on your chosen seat,
follow the corresponding instructions:
Seat Options
- Pip: Plastic seat
- Liv: Plastic seat with upholstered seat pad
- Puk: Plastic seat with armrests
- Liz: Plastic seat with armrests and upholstered seat pad
- Otis: Upholstered seat with armrests
For each seat option, use the provided mounting sets (B, D, or G) as indicated in the overview.
Mounting Steps
- Attach the seat to the Nora base following the provided illustration.
- Tighten the screws to 80% of their capacity.
- Ensure that the arrow on the base points towards the front of the seat.
WAT LEUK DAT JE HEBT GEKOZEN VOOR NOLON!
THANK YOU FOR CHOOSING NOLON
- nolon is a unique concept: we do not offer ready-made chairs and bar stools, but supply individual parts, so you can put together your ideal piece of furniture!
- To summarize: all our nolon chairs fit to all our nolon bases. That is why we provide detailed assembly instructions.
- Method: We start with the base and add one of our seats. Not all chairs require the same mounting parts to assemble to the base. If you have opted for a Nora base, we will first explain how to assemble the Nora base. An overview of the seats and the matching mounting sets, which may vary (sets B, D or G). Additionally followed by a clear explanation of how to mount the seat on the base.
- If you need help, watch our online installation videos. If not clear, do not hesitate to contact our customer service. We are happy to help you.
NORA ONDERSTEL
NORA BASE
- The Nora base is supplied in one piece.
- To install the seat on the base, go to the assembly instructions.
- Caution! Please note that it may be necessary to fit or replace protective caps on the chair legs to prevent damage to the floor.
MONTAGE-INSTRUCTIE MET MONTAGESET
ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT
Pip
Plastic chair.
Liv
Plastic chair with upholstered seat pad.
Puk
Plastic chair with upholstered seat pad.
Puk
Plastic armchair.
Liz
Plastic armchair with upholstered seat pad.
Otis
Upholstered armchair.
Install the base on the seat as shown in the image above. Tighten the screws to 80%.- Important : Make sure the arrow on the base points towards the front of the seat.
MONTAGE-INSTRUCTIE MET MONTAGESET
ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT
Fé
Upholstered chair.
Isa
Upholstered chair
Eef
Upholstered armchair.
Install the
base on the seat as shown in the image above. Note! The washer F needs to be
assembled between the base and the seat. Tighten the screws to 80%.
Important: Make sure the arrow on the base points towards the front of the
seat.
MONTAGE-INSTRUCTIE MET MONTAGESET
ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT
Mia
Upholstered armchair.
Mae
Upholstered armchair. 
Install the base on the seat as shown in the image above. Note! The washer I
needs to be assembled between the base and the seat. Tighten the screws to
80%.
Important: Make sure the arrow on the base points towards the front of the
seat.
LAATSTE STAP VAN DE MONTAGE
LAST STEP OF THE ASSEMBLY
Finally, turn the chair over and place the entire chair on a flat surface. Place approximately 60 kg of weight on the seat so that all legs are on the ground and then tighten all screws to 100%.
ENG Below you will find some maintenance tips and tricks so you can enjoy your new chair to the fullest.
Metal
Over time, metal tent to rust if it has come into contact with water and
moisture. The metal frames of nolon chairs have a special coating that
prevents rust formation. Therefore, it is very important not to damage or
scratch this coating (outer layer of the frame). The metal frames can be
cleaned with a soft cloth and soapy water. Do not use too much water and
always dry the surface afterwards.
Wood
Wood is a natural material that changes color under the influence of UV
radiation. To avoid major color differences, it is important that all
furniture is exposed to the same amount of sunlight. Temperature and humidity
can also damage wood. For daily maintenance, you can use a dry microfiber
cloth to dust wood. Stains can be removed with a soft cloth and soapy water.
Do not use too much water and always dry the surface afterwards.
Fabric upholstery
All fabrics can discolour due to UV radiation, so make sure that the chairs
are not exposed to direct sunlight. Treat the fabric with a protective spray
before use to prevent stains. Test the spray in advance on an invisible
surface. Remove moisture or stains immediately using only a damp or special
textile cleaner. Avoid harsh rubbing and the use of chemicals and alcohol
should be avoided. Lint from the textile may appear on the surface, but this
is completely normal and will not return after a few removals. When fabric
seats are removed from the box, pressure points may be visible in the fabric.
These should disappear within a few days.
Plastic
Plastic material is easy to clean and maintain. A plastic seat does not need to be treated before use. Stains can be removed with a soft cloth and mild detergent.
Floor protection
nolon hairs are equipped with standard floor caps, but these do not provide
sufficient protection for all types of floors. That is why nolon has designed
special floor caps for each chair frame, so that each floor is properly
protected. Scan the QR code for more information and additional products on
the nolon website.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>