nolon Noa Dining Room Chair Instructions

nolon Noa Dining Room Chair

Product Information

• Product: Noa
• Manufacturer: NOLON

Specifications

• Concept: Individual parts for customizable furniture
• Compatibility: All nolon chairs fit all nolon bases
• Base: Noa

Product Usage Instructions

Assembly of Noa Base
To assemble the seat on the Noa base, please follow the assembly instructions below:

1. Place the seat upside down on a flat surface.
2. Attach the base to the seat.
3. Important: Ensure that the arrow on the base points towards the front of the seat.
4. Secure the base to the seat using ring C and screw B.
5. Tighten the 4 screws firmly.

Note:
The chair comes with adjustable plastic floor legs. Before use, always turn them out a few turns to ensure the legs are firmly on the ground. Avoid loosening the floor plugs excessively, as they may come off from the chair leg.

Seat Options and Mounting Sets
We offer different seat options that can be mounted on the Noa base. The available seats are:

• Pip: Plastic seat
• Liv: Plastic seat with upholstered fixed cushion
• Puk: Plastic seat with armrests
• Liz: Plastic seat with armrests and upholstered fixed cushion
• Otis: Upholstered seat with armrests

The mounting sets required for each seat may vary. Please refer to the assembly instruction manual for the specific mounting sets (C or F) needed for each seat.

FAQ

• Do I need floor protection for the chair?
  If you require floor protection, you can scan the provided QR-code for more information.

• Where can I find online installation videos?
  You can find online installation videos on our website. If you need further assistance, please do not hesitate to contact our customer service.

• How can I contact customer service?
  You can reach our customer service through the following channels:

  • Website: www.nolon.nl
  • Email: [email protected]
  • Phone: 036 799 80 25

HOW NICE THAT YOU CHOSE NOLON

• nolon is a unique concept: we do not offer ready-made chairs and bar stools, but supply individual parts, so you can put together your ideal piece of furniture!
• To summarize: all our nolon chairs fit to all our nolon bases. That is why we provide detailed assembly instructions.
• Method: We start with the base and add one of our seats. Not all chairs require the same mounting parts to assemble to the base. If you have opted for a Noa base, we will first explain how to assemble the Noa base. An overview of the seats and the matching mounting sets, which may vary (sets C of F). Additionally followed by a clear explanation of how to mount the seat on the base.
• If you need help, watch our online installation videos. If not clear, do not hesitate to contact our customer service. We are happy to help you.

ASSEMBLY NOA BASE

• The Noa base is supplied in one piece.
• To install the seat on the base, go to the assembly instructions.
• Caution! The chair comes with adjustable plastic floor legs. Before use, always turn them out a few turns to ensure the legs are firmly on the ground.
• Avoid loosening the floor plugs excessively, as they may come off from the chair leg.

ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT

Place the chair upside down on a flat surface. Assemble the seat directly on the base.

Important:
Make sure the arrow on the base points towards the front of the seat. Assemble the seat with washer C and screw B. Tighten the 4 screws securely.

Place the chair upside down on a flat surface. Assemble the seat directly on the base.

Important:
Make sure the arrow on the base points towards the front of the seat. Assemble the seat with washer E and screw D. Tighten the 4 screws securely.

CARE INSTRUCTIONS

Below you will find some maintenance tips and tricks so you can enjoy your new chair to the fullest.

• Metal
  Over time, the metal tent to rust if it has come into contact with water and moisture. The metal frames of Nolon chairs have a special coating that prevents rust formation. Therefore, it is very important not to damage or scratch this coating (outer layer of the frame). The metal frames can be cleaned with a soft cloth and soapy water. Do not use too much water and always dry the surface afterwards.

• Wood
  Wood is a natural material that changes colour under the influence of UV radiation. To avoid major colour differences, all furniture must be exposed to the same amount of sunlight. Temperature and humidity can also damage wood. For daily maintenance, you can use a dry microfiber cloth to dust wood. Stains can be removed with a soft cloth and soapy water. Do not use too much water and always dry the surface afterwards.

• Fabric upholstery
  All fabrics can discolour due to UV radiation, so make sure that the chairs are not exposed to direct sunlight. Treat the fabric with a protective spray before use to prevent stains. Test the spray in advance on an invisible surface. Remove moisture or stains immediately using only a damp or special textile cleaner. Avoid harsh rubbing and the use of chemicals and alcohol should be avoided. Lint from the textile may appear on the surface, but this is completely normal and will not return after a few removals. When fabric seats are removed from the box, pressure points may be visible in the fabric. These should disappear within a few days.

• Plastic
  Plastic material is easy to clean and maintain. A plastic seat does not need to be treated before use. Stains can be removed with a soft cloth and mild detergent.

• Floor protection
  nolon hairs are equipped with standard floor caps, but these do not provide sufficient protection for all types of floors. That is why Nolon has designed special floor caps for each chair frame so that each floor is properly protected. Scan the QR code for more information and additional products on the Nolon website.

Contact Information

• nolon Vlotbrugweg 9 1332 AE Almere NL
• www.nolon.nl
• [email protected]
• 036 799 80 25

References

• Nolon – thuis in stoelen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>