SEALEY AP7210SS Mobile Stainless Steel Tool Cabinet 10 Drawer and Cupboard Instructions
- June 17, 2024
- SEALEY
Table of Contents
INSTRUCTIONS FOR
MOBILE STAINLESS STEEL TOOL CABINET
10 DRAWER & CUPBOARD
MODEL NO: AP7210SS
AP7210SS Mobile Stainless Steel Tool Cabinet 10 Drawer and Cupboard
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Instruction Manual
Wear Protective gloves
SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop
practice regulations are adhered to when using this product.
Locate in a suitable work area.
DO NOT let children near the cabinet.
DO NOT open more than one drawer at a time.
Fill from the bottom drawer up.
If the tool cabinet is filled from the top drawer down, it will be top heavy
and may fall over.
DO NOT attempt to lift by the side handles, use chains, ropes or other lifting
devices.
DO NOT step or climb on the product or on the drawers.
DO NOT alter the product in any way, e.g. do not weld on external lock bars or
attach electrical equipment. This may cause damage to the product or cause
personal injury.
Keep on a level surface.
When moving the cabinet DO NOT
pull it. Push the cabinet to prevent injury.
Close and lock the drawers
before moving the cabinet. If the drawers came open they could make the
cabinet unstable.
Apply the brakes when in desired
position.
DO NOT mount on a truck bed or any other moving object.
Be aware of sharp edges wear
gloves.
INTRODUCTION
Anti-fingerprint stainless steel construction with a 38mm thick wooden worktop. 45kg capacity drawers with aluminium pull handles and non-slip liners. Four large castor wheels, two fixed and two swivel (which include brakes). Comes with heavy-duty side handle for comfort and control when manoeuvring. Supplied with locks and keys.
SPECIFICATION
Model no: ………………………………………… AP7210SS
Overall size (W x D x H): ………………….. 1990 x 490 x 955mm
Medium 1/2 drawer (x3): ……………………… 375 x 395 x 65mm
Large 1/2 drawer (x1): ……………………….. 375 x 395 x 140mm
X-large 1/2 drawer (x1): …………………….. 375 x 395 x 220mm
Medium drawer (x3): …………………………… 855 x 395 x 65mm
Large drawer (x1):…………………………….. 855 x 395 x 140mm
X-large drawer (x1): ………………………….. 855 x 395 x 220mm
Cupboard size (x1): …………………………… 400 x 465 x 685mm
4. ASSEMBLY
4.1. Fit handle
4.1.1. Attachhandlewith6mmx12mmhexbolts,springand flatwashers.
4.2. Fit casters
WARNING! Two or more people are required to lay down or stand up the
cabinet. DO NOT stand in front or behind and lock drawers whilstturningover.
4.2.1. Carefully lay the cabinet upside down with a soft mat underneath for
protection.
4.2.2. Fit the two swivel/braked castors, on the handle side using 10mm x 25mm
bolts, through each castor and into the bottom of the cabinet. Tighten
securely.
4.2.3. Repeat for the two rigid casters on the other side.
4.3. Drawers
4.3.1. New drawers slides may be stiff and difficult to open at first. A
gentle outward pull should release the safety catch that prevents the drawer
from opening whilst the cabinet is being moved.
4.3.2. Remove drawers from their slides as below (pull left slide tab down and
pull right side slide tab up).
MAINTENANCE
5.1. To clean use a soft cloth that will not scratch the surface.
5.2. DO NOT use solvents of any kind they may damage the surface.
5.3. Liquid spills should be removed immediately, use a soft clean cloth to
blot the spill gently – avoid rubbing.
5.4. Grease the casters with good quality grease once a year.
5.5. Lubricate the drawer slides twice a year with light duty oil.
Environmental Protection
** Recycle unwanted materials instead of disposing of them as waste. All
tools, accessories and packaging should be sorted, taken to a recycling centre
and disposed of in a manner which is compatible with the environment.
When the product becomes copletely unserviceable and requires disposal, drain
off any fluids (if applicable) into approved containers and dispose of the
product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY:** Guarantee is 12 months from purchase date, proof of which will
be required for any claim.
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
© Jack Sealey Limited
AP7210SS | Issue 1 – 10/05/16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>