cecotec WanderlustMix USB Single Serve Jug Blender User Manual

cecotec WanderlustMix USB Single Serve Jug Blender

Specifications

• Product: USB single-serve jug blender
• Model: WanderlustMix USB

Product Usage Instructions

Parts and Components

Before using the WanderlustMix USB, familiarize yourself with the different parts and components:

• Jug Blender Base
• Jug Blender Cup
• Lid with Blades
• USB Cable
• User Manual

Before Use

Before using the WanderlustMix USB, take note of the following:

• Ensure that the product is in good condition and all parts are clean.
• Inspect the USB cable for any damages or frays. Do not use if the cable is damaged.
• Place the product on a dry, stable, flat, and heat-resistant surface.
• Read and understand all safety instructions provided in the user manual.

Product Assembly

To assemble the WanderlustMix USB, follow these steps:

1. Place the Jug Blender Base on a stable surface.
2. Attach the Jug Blender Cup onto the base by aligning the grooves and twisting it clockwise until it locks into place.
3. Securely attach the Lid with Blades onto the Jug Blender Cup by aligning the arrows and twisting it clockwise until it locks into place.

Operation

To use the WanderlustMix USB, follow these steps:

1. Ensure that the assembled product is securely placed on a stable surface.
2. Plug the USB cable into a compatible power source.
3. Press the power button to start blending.
4. Adjust the blending time according to your desired consistency.
5. Once blending is complete, unplug the USB cable from the power source.

Cleaning and Maintenance

To clean and maintain the WanderlustMix USB, follow these steps:

1. Before cleaning, ensure that the product is unplugged and turned off.
2. Remove the Lid with Blades from the Jug Blender Cup.
3. Wash all removable parts with warm soapy water and a non-abrasive sponge.
4. Rinse thoroughly and dry all parts before reassembly.
5. Wipe the Jug Blender Base with a damp cloth, ensuring it is dry before use.

FAQs

• Q: Can I use accessories that are not provided with the product?
  A: No, it is recommended to only use accessories that are provided with the WanderlustMix USB. Using unauthorized accessories may affect the performance of the product and may cause injuries.

• Q: Can I repair the product myself?
  A: No, it is not recommended to attempt repairing the WanderlustMix USB on your own. For any issues or concerns, please contact Cecotec’s official technical support for assistance.

• Q: How should I clean and maintain the product?
  A: To ensure proper functioning and longevity of the product, clean and maintain it according to the instructions provided in the user manual. Always remember to unplug and turn off the product before cleaning. Refer to the “Cleaning and Maintenance” section for detailed instructions.

PARTS AND COMPONENTS

1. Lid
2. Blades
3. Power button
4. USB charging port
5. Base
6. Plastic cup
7. Motor

NOTE: the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good condition. If there is any piece missing or in bad condition, contact the official Cecotec Technical Support Service immediately.

Box content

• USB blender
• Micro USB charging cable

PRODUCT ASSEMBLY

1. Check that the silicone gaskets are correctly installed on the lid and the base of the blades. This is very important to avoid leakage.
2. Screw the cup clockwise onto the base of the blades until, when the button is pressed, the indicator light shows a white light.

OPERATION

Indicator light instructions

1. Press the power button twice so that the blender starts operating. The indicator light shall be white. The blender will operate for a programmed time of 45 seconds and then stop automatically.
2. When charging the battery with the USB cable, the indicator light will remain red until the unit is fully charged. Once charging is complete, the indicator light will turn white.
3. The red indicator light will flash five times if you try to use the blender without the cup or if you have inserted it incorrectly, indicating that it cannot work.
4. When charging, if you try to use the blender, the red indicator light will flash indicating that the device cannot operate.
5. When the blender stops due to abnormal food rotation, the red and white indicator light will flash ten times alternately.
6. The red indicator light will remain on for five seconds when the blender is almost out of battery, or the battery is completely used up.
7. If the cup leaks liquid, the appliance stops automatically as a protection measure after 5 seconds of operation. In that moment, the red indicator light will flash three times.

Tips

• Turn the cup upside down if you see that the liquid is spilling or the thread is too loose. If you still cannot solve the problem, please contact the official Cecotec Technical Support Service.
• The recommended charging time is from 3 to 5 hours.
• It is recommended to use 200 ml of water or any other liquid per 100 g of ingredients.

Operating instructions

1. Cut fruits into small pieces (from 1.5 to 2 cm approx.), peeled and pitted.
2. Add the fruits and water/milk to the cup.
3. Press the power button twice so that the blender starts operating.
4. After 45 seconds, the blender will automatically stop.

Charging process

The battery capacity is 2500 mAhx2. It can be charged by connecting the USB cable to an adapter (≤2A), external battery, computer, or USB car charger.

1. Plug the USB cable into the charging port on the base.
2. Connect the other end of the cable to an adapter, external battery, USB port on a computer, etc

Attention
If the red indicator light is on, the blender is charging. When fully charged, the indicator light will turn white. Do not use the blender while being charged.

Tips
If you have put the blender on charge, but the light does not work or the battery is not charging, try changing the charging cable. If it still does not work, contact the official Cecotec Technical Support Service to solve the problem.

CLEANING AND MAINTENANCE

1. Detach the cup from the base.
2. Rinse the cup and the lid with water. Use a cloth to clean the blender body.

Note
Prevent water from entering the button and the USB charging port.

TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

• Product reference: 04396
• Product: WanderlustMix USB single-serve jug blender
• Nominal input: 5V DC 2A
• Nominal output: 7.4 V DC 5 A
• Rated capacity: 7.4 V
• Battery capacity: Lithium 2500 mAh*2

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

• This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
• Consumers must contact their local authorities or retailers for information concerning the correct disposal of old appliances and/or their batteries.
• Compliance with the above guidelines will help protect the environment.

TECHNICAL SUPPORT AND WARRANTY

• Cecotec shall be liable to the end-user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
• It is recommended that repairs be carried out by qualified personnel.
• If at any moment you detect any problem with your product or have any doubts, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es
Cecotec Innovaciones S.L. Av. Reyes Católicos, 60 46910, Alfafar (Valencia), Spain SF01230810

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>