cecotec ReadyWarm 2070 Max Force Smart Fan Heater Instruction Manual

cecotec ReadyWarm 2070 Max Force Smart Fan Heater

Important Information

This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use.

PARTS AND COMPONENTS

Fig. 1

A. Air outlet
B. Control panel
C. Display

Fig./Img./Abb./Afb./ Rys. 1

CONTROL PANEL/DISPLAY

E. On/Off (Standby)
F. Mode
G. Timer knob
H. Automatic Mode

Fig./Img./Abb./Afb./ Rys. 2

Fig. 3

REMOTE CONTROL

I. On/Off (Standby)
J. Timer knob
K. Mode
L. High temperature
M. Low temperature

Fig./Img./Abb./Alb./ Rees. 3

NOTE:
The graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This device is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cerotic Technical Support Service immediately.

Box content

1. Ready Warm 2070 Max Force Smart Black/White
2. Remote control
3. Instruction manual

OPERATION

• Unwind the cable to its full length and place the heater on a firm, level surface in a vertical and stable position.
• Visually inspect the air inlets and outlets to ensure that there are no obstructions.
• This heater is equipped with an anti-tip switch and can only be operated in vertical position. If the unit is tilted or knocked, the power will be switched off automatically. When the heater is returned to the vertical position, it will operate normally.

NOTE:
the first time you use this heater, it may give off some odour. This is normal during the first few uses or after long-term storage. Make sure the heater is in a well-ventilated area and keep running it until the smell disappears.

HEATER OPERATION

1. Plug the heater into a power outlet.
2. Press the ON/OFF button (Standby) to start the heater.
3. Press the Mode button to switch between fan, low mode (1000W) and high mode (2000W).
4. Press the Timer button to set the timer from 0 to 24 hours with 1 hour as the interval.
5. By pressing the “AUTO” button on the control panel, the set temperature changes from 10 to 49ºC. The heater will alternate between fan, low power and high power to maintain the set temperature.

CLEANING AND MAINTENANCE

1. Before cleaning the appliance, switch it off, unplug it from the mains and allow it to cool down (for about 30 minutes).
2. Carefully wipe the outside of the heater with a soft damp cloth and dry it thoroughly with a dry cloth. Note: do not immerse the power cord, plug or heater in water or any other liquid, nor pour water or any other liquid on the heater.
3. Over time, dust can accumulate. It can be removed by wiping with a damp cloth or using the brush of your vacuum cleaner.
4. Make sure that the heater is dry before plugging it back into the socket.
5. Any other service must be performed by an authorised service representative. Do not use the heater if it has been damaged in any way. When the heater is not in use, store it in a cool, dry place. Do not store it until the heater is cold.

TECHNICAL SPECIFICATIONS

Product reference: 08257/08260
Product: Ready Warm 2070 Max Force Smart Black/White
Power: 1800W – 2000W
Voltage: 220-240 V~
Frequency: 50/60 Hz

08257/08260 ReadyWarm 2070 Max Force Smart Black/White

Item| Symbol| Value| Unit| Item| Unit
Heating power| Type of heat input, for electric storage local space heaters only (single select)
Rated heat output| Pnom| 1.8 – 2.0| kW| Manual heat charge control with integrated thermostat| [no]
Minimum heat output (indicative)| Pmin| 1.0| kW| Manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous heat output| Pmax| 2.0| kW| Electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| Fan assisted heat output| [no]
At nominal heat output| elmax| 0,000| kW| Type of heat output/room temperature control (single select)
At minimum heat output| elmin| 0,000| kW| Single stage heat output and no room temperature control| [no]
In standby mode| elSB| 0,000| kW| Two or more manual stages, no room temperature control| [no]
| With mechanic thermostat room temperature control| [yes]
| | | | With electronic room temperature control| [no]
| | | | Electronic room temperature

control plus day timer

| [no]
| | | | Electronic room temperature control plus week timer| [no]
| Other control options (multiple selections possible)
| | | | Room temperature control, with presence detection| [no]
| | | | Room temperature control, with open window detection|   [no]
---|---|---|---|---|---
| | | | With distance control option| [no]
| | | | With adaptive start control| [no]
| | | | With working time limitation| [no]
| | | | With black bulb sensor| [no]
Contact details:| Cerotic Innovations S.L Av. Reyes Calicos nº60 – 46910, Alf afar (Valencia, Spain)

Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

 This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cerotic shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cerotic Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Customer Support

www.cecotec.es

Cerotic Innovations S.L. Av. Reyes Calicos, 60 46910, Alf afar (Valencia) AP01230614

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>